• 펄프종이기술
• /
• 제48권1호
• /
• pp.127-133
• /
• 2016

This study is performed that furniture and interior materials of MDF's (Medium Density Fiberboard) biodegradation properties, and the goal of this study is investigation of possibility of waste-MDF's composting after landfilling. To investigate biodegradation, this study was performed according to KS M ISO 14855-1, and there were two different soil conditions including a compost condition and an activated vermiculite condition as artificial soil. This experiment was tested for 40 days. The measurement of carbon-dioxide generation was processed every 24 hour in 1-2 week, and every 48 hour after 3 week. In the same days, MDF showed 24.4% of biodegradation in compost condition, and 6.2% in activated vermiculite. Also, the reference material of TLC (thin-layer chromatography) grade cellulose showed 26.4%, 11.4% in compost and activated vermiculite respectively. The dilution plate method was performed for biological analysis in the study. This experiment was used for investigation of inoculum's (Bacillus licheniformis) activity. As the result of bioassay, compost has more other germs include inoculum than activated vermiculite in the first week. Especially in the 2nd week, the reference material under the compost condition showed the most germ's activity, and also the biodegradation was the highest. Consequentially, compost condition was able to reduce a performing period of biodegradation testing than activated vermiculite. However, activated vermiculite could be stabilizing errors between repetition.

• 한국콘텐츠학회논문지
• /
• 제9권8호
• /
• pp.147-157
• /
• 2009

최근 객체지향 개발 방법론을 적용하는 소프트웨어 개발 프로젝트에서 개발 노력 추정 기법으로 사용사례점수(Use Case Point, UCP)에 대한 연구가 계속되고 있다. 기존의 연구는 기술적 요인과 환경적 요인을 적용한 AUCP(Adjusted Use Case Point)에 상수를 곱하여 개발 노력을 추정하는 선형모델을 제안하고 있다. 그러나 소프트웨어 규모가 증가하면 개발기간은 기하급수적으로 증가함으로서 비선형 회귀모델이 적합하다는 사실과 UCP 계산과정에서 TCF(Technical Complexity Factor)와 EF(Environmental Factor)를 적용함에 따른 FP(Function Point) 오차가 발생함으로서 AUCP로 규모를 추정하는 것은 비현실적이다. 이 논문은 사용사례점수 기반의 기존 연구의 문제점을 제시하고, 기존 연구의 문제점인 TCF와 EF를 고려하지 않고 직접 UUCP로 부터 개발 노력을 추정할 수 있는 모델(선형, 로그형, 다항식, 거듭제곱, 지수형)을 도출하고 평가한다. 그 결과, 기존의 선행 모델보다 비선형모델인 지수형 모델이 우수한 결과를 보였다. 따라서 개발될 소프트웨어 시스템의 UUCP를 계산한 후 제안된 모델을 이용하여 개발 노력을 추정함으로서 개발에 소요되는 직접비용 산정이 가능하다.

• Journal of Chest Surgery
• /
• 제22권3호
• /
• pp.416-424
• /
• 1989

We have performed eight, single transplantations of right lung in dogs from September, 1988 to March 1989 at the Thoracic & Cardiovascular Surgical department, Yonsei University, College of Medicine, Seoul, Korea. We wrapped bronchial anastomosis site with great omentum and used cyclosporin in preoperative and postoperative periods in seven cases except one. The one without wrapping the bronchial anastomotic site with omentum and using cyclosporin died due to bronchial anastomotic site rupture in postoperative fourth day. If there is no reason to choose one side over the other, we would generally choose to do left-sided transplant as this is technically somewhat easier because of the long length of recipient bronchus and the ease of clamping the left atrium proximal to the pulmonary veins. The right atrium limits the amount of left atrium that can have incorporated into the clamp proximal to the pulmonary veins on the right side. But we had chosen to do right-sided transplant of lung because we must take variable technical experiences on right sided lung transplant in dogs. We have to anastomose one of pulmonary vein and left atrial wall on right-sided transplant easily only with double ligation of one pulmonary vein because right atrium limited the clamp of left atrium proximal to pulmonary veins with decreased venous return and cardiac output in some dogs. All seven dogs with right-sided lung transplant had survived more than one day with good condition except one. The one dog have to be sacrificed to evaluate the difference between the gas analysis in pulmonary venous and arterial blood in post-operative eight hours. We found hemorrhagic pulmonary edematous changes of contralateral left lung in this dog. And also all dogs have to be sacrificed for the evaluation of surgical problems, anytime in post-operative periods without any cardiopulmonary resuscitative efforts when the general condition would be worse progressively. We found no any surgical technical errors in seven dogs except one with thrombi in suture site of left atrium. There were hemorrhagic pulmonary edematous changes of transplanted right lung in one, of contralateral left lung in one, of contralateral left lung with double ligation of its pulmonary artery in one, thrombi around left atrial sutures sites in one, multiple air leakage in one bronchial rupture in one due to rejection or infection. There were accidental extubation and delayed intubation in one and unknown cause of death in one.

• 대한정형외과학회지
• /
• 제55권5호
• /
• pp.374-382
• /
• 2020

견관절 불안정증 수술의 가장 흔한 합병증은 불안정성의 재발이다. 견관절 불안정증 수술 후 불안정증 재발의 원인은 주로 외상, 부정확한 진단 및 술기상의 문제 등이 있으며 재발률을 높이는 위험인자로는 환자 요인과 해부학적 원인, 기술적 요인이 있다. 수술 실패의 원인을 세심한 병력 청취와 이학적 검사, 영상학적 검사 등으로 파악하여 원인 병변에 적절한 치료를 시행해야 한다. 수술 후 재발한 불안정증은 우선적으로 비수술적 치료를 고려해야 한다. 하지만 비수술적 치료가 실패한 경우 Bankart 병변의 파열, 관절막의 이완, 관절와 및 상완골 두의 결손에 따른 올바른 적응증을 가지고 적절한 치료 방법을 선택하여 가능한 해부학적 복원을 시행하여야 재발이 반복되는 것을 방지할 수 있을 것이다.

• 한국항해항만학회지
• /
• 제38권4호
• /
• pp.373-378
• /
• 2014

본 논문에서는 위성항법시스템(GNSS)의 다양화에 따른 DGNSS 기준국(RSIM, Reference Station and Integrity Monitor)의 재구축을 위하여, 유럽연합(EU) 위성항법시스템인 Galileo의 E1 의사거리 보정정보 생성 알고리즘과 GPS/Galileo 시뮬레이션을 통한 성능검증에 대해 다룬다. 먼저 DGPS RSIM에서 DGNSS RSIM으로 전환을 위한 운영적 측면에서의 기술 및 메시지 표준과 사용자 방송 측면에서의 메시지 표준에 대해 살펴본다. 일반적으로 GNSS의 의사거리 보정을 위해서는 정확한 GNSS 위성위치와 사용자 위치를 알아야만 한다. 그러므로 Galileo 위성위치를 정확하게 계산하기 위해서, Galileo ICD 문건의 위성위치 계산식을 이용하여 사용자 수신기에서 제공하는 궤도력 정보를 기반으로 해당 위성 위치를 추정한다. 그리고 위성시계 옵셋과 사용자 수신기의 시각오차, GPS와 Galileo 위성의 시스템 타임 옵셋을 계산하여 GPS/Galileo 의사거리 보정정보를 생성한다. GPS/Galileo 시뮬레이터를 연동한 성능검증 플랫폼을 기반으로 GPS/Galileo 보정정보의 오차를 분석하고, 측위정확도를 분석하여 그 성능을 검증하였다. 국제기구(RTCM)에서 요구하는 기준국 운영을 위한 측위 성능을 충족할 수 있음을 확인하였다.

• 치위생과학회지
• /
• 제24권1호
• /
• pp.62-70
• /
• 2024

Background: This study aimed to evaluate ChatGPT's performance accuracy in responding to questions from the national dental hygienist examination. Moreover, through an analysis of ChatGPT's incorrect responses, this research intended to pinpoint the predominant types of errors. Methods: To evaluate ChatGPT-3.5's performance according to the type of national examination questions, the researchers classified 200 questions of the 49th National Dental Hygienist Examination into recall, interpretation, and solving type questions. The researchers strategically modified the questions to counteract potential misunderstandings from implied meanings or technical terminology in Korea. To assess ChatGPT-3.5's problem-solving capabilities in applying previously acquired knowledge, the questions were first converted to subjective type. If ChatGPT-3.5 generated an incorrect response, an original multiple-choice framework was provided again. Two hundred questions were input into ChatGPT-3.5 and the generated responses were analyzed. After using ChatGPT, the accuracy of each response was evaluated by researchers according to the types of questions, and the types of incorrect responses were categorized (logical, information, and statistical errors). Finally, hallucination was evaluated when ChatGPT provided misleading information by answering something that was not true as if it were true. Results: ChatGPT's responses to the national examination were 45.5% accurate. Accuracy by question type was 60.3% for recall and 13.0% for problem-solving type questions. The accuracy rate for the subjective solving questions was 13.0%, while the accuracy for the objective questions increased to 43.5%. The most common types of incorrect responses were logical errors 65.1% of all. Of the total 102 incorrectly answered questions, 100 were categorized as hallucinations. Conclusion: ChatGPT-3.5 was found to be limited in its ability to provide evidence-based correct responses to the Korean national dental hygiene examination. Therefore, dental hygienists in the education or clinical fields should be careful to use artificial intelligence-generated materials with a critical view.

• 산업공학
• /
• 제25권1호
• /
• pp.87-95
• /
• 2012

Very special and tentative considerations including emotional aspects are required to apply any new mechanism and methodologies for manufacturing fields due to several reasons. This study reviews the characteristics of manufacturing collaborations through specific cases applied digital engineering to enhance the collaboration performance in manufacturing domains. Two cases of collaboration related with automotive manufacturing process are analyzed to extract meaningful insights for better collaboration model suggestions. The first case deals the robot simulation to find out advance errors in jig and fixture design during the various welding process of body-in-whites. The effective communication protocol to share their idea and agreed schedules are essential for this collaboration. More severe requirement of collaboration between R&D and manufacturing departments are studied in the second case for e-coating process. The invisible barriers among different departments are lowered by the process application of Computer Aided Engineering which can make sure their own interesting effectively. Those technical and managerial suggestions can be used when the information system and standard process are sought to implement and update not only when innovation projects are executed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.326-329
• /
• 2004

In this paper, we show a new form of blood pressure controller combined PI control with $H_{\infty}$ loop-shaping. Hypertensive patients or post-operative patients need to maintain normally blood pressure. Exact regulation of blood pressure is needed for maintaining variable blood pressure of preventing complications. The regulation of blood pressure is achieved by injecting drugs, and usually sodium nitroprusside is used as those kinds of drugs. It is necessary to control the infusion rate sodium-nitroprusside carefully to achieve the desired blood pressure. It has been known that regulation of blood pressure by automatic controller is more effective than regulation of blood pressure by human operators. The control of blood pressure has many constraints and uncertainties. Most of biological system has the time-varying variables and the side effects such as increased risk of sepsis and organ failure. To solve such a problem, we design a new robust PI controller using $H_{\infty}$ loop-shaping to decrease noise effects that come out from human body and errors for time delay. The system with designed controller shows more stable control of mean blood pressure and more robust performance for uncertainties. Validation methods for the control performance are confirmed to computer simulations.

• 한국CDE학회논문집
• /
• 제12권1호
• /
• pp.74-85
• /
• 2007

During the lifecycle of a nuclear power plant many organizations are involved in KOREA. Korea Plant Engineering Co. (KOPEC) participates in the design stage, Korea Hydraulic and Nuclear Power (KHNP) operates and manages all nuclear power plants in KOREA, Dusan Heavy Industries manufactures the main equipment, and a construction company constructs the plant. Even though each organization has a digital data management system inside and obtains a certain level of automation, data sharing among organizations is poor. KHNP gets drawing and technical specifications from KOPEC in the form of paper. It results in manual re-work of definition and there are potential errors in the process. A data warehouse based on a neutral model has been constructed in order to make an information bridge between design and O&M phases. GPM(generic product model), a data model from Hitachi, Japan is addressed and extended in this study. GPM has a similar architecture with ISO 15926 "life cycle data for process plant". The extension is oriented to nuclear power plants. This paper introduces some of implementation results: 1) 2D piping and instrument diagram (P&ID) and 3D CAD model exchanges and their visualization; 2) Interface between GPM-based data warehouse and KHNP ERP system.

• 한국정밀공학회지
• /
• 제13권12호
• /
• pp.46-53
• /
• 1996

Micro drilling is one of the most important machining types and its necessity becomes more and more increasing in the whole field of industry. Micro drilling, however, has few the case of practical application, because it requests high techniques : manufacturing micro drill, treating chip, producting precise hole shape and progressing machining effeciency. Micro drilling has a technical problem: drill breakage from the lack of drill rigdity and the interuption of chip. It is, therefore, essential to select the proper cutting conditions and the step fed for the method solving the lack of rigidity and the interruption of chip. Especially, step feed is very efficient to avoid the breakage of drill, but bring about reducing of cutting efficiency. The study on step feed must be requested more than the present in the near future. The purpose of this paper is to investigate experimentally about cutting conditions which affect on tools and round errors and to estimate about the effect of step feed as well as optimal step feed size to solve the breakage of drill.