• Journal of Power Electronics
• /
• v.12 no.1
• /
• pp.208-214
• /
• 2012

This paper presents a novel approach based on the loci of instantaneous symmetrical components called "Wing Shape" which requires the measurement of three input stator currents and voltages to diagnose interturn insulation faults in three phase induction motors operating under different loading conditions. In this methodology, the effect of unbalanced supply conditions, constructional imbalances and measurement errors are also investigated. The sizes of the wings determine the loading on the motor and the travel of the wings while their areas determine the degree of severity of the faults. This approach is also applied to detect open circuit faults or single phasing conditions in induction motors. In order to validate this method, experimental results are presented for a 5 hp squirrel cage induction motor. The proposed technique helps improve the reliability, efficiency, and safety of the motor system and industrial plant. It also allows maintenance to be performed in a more efficient manner, since the course of action can be determined based on the type and severity of the fault.

• Physical Therapy Korea
• /
• v.25 no.1
• /
• pp.53-61
• /
• 2018

Background: The process of language translation, adaptation, and cross-cultural validation of tools for use in multiple countries requires the adoption of well-established, comprehensive, and rigorous methodological approaches. Back translation, which is the most recommended method, permits the detection of errors in the translation and the identification of words or phrases that cannot be accurately or literally translated. Objects: The aim of this study was to verify the content validity of a Korean version of a Balance Evaluation Systems test (BESTest) by using a back-translation method. Methods: This research was conducted in six steps: 1) translation of the BESTest into Korean, 2) evaluation of the translation conformity of Korean-translated BESTest, 3) evaluation of the degree of translation comprehension, 4) back translation of Korean BESTest, 5) evaluation of the technical and conceptual equivalence, and 6) completion of the Korean version of BESTest by the translation verification committee. Results: In this study, Korean version of the BESTest achieved a rating of more than 3 (moderate) for translation comprehension, and technical equivalence and conceptual equivalence of back translation were evaluated as 3 (moderate) or more. Conclusion: The Korean version of the BESTest has proven content validity and is an appropriate tool to measure balance function.

• Journal of the Korean Institute of Navigation
• /
• v.12 no.2
• /
• pp.1-22
• /
• 1988

The transportations of most of cargoes in world trade have been fulfilled through sea lanes and it seems this trend will not change in near future. Nowadays, inview of the technical aspects of merchant vessels, they are continuously enlarged in hull size and greatly specialized in structure for the cargo spaces and dramatically automatized in navigating, piloting, cargo operating and various other operations, which unavoidably require high technicals in operating the modern merchant vessels. On the contrary to the trend of requiring of operating high technicals, the capabilities of crew on board have been gradually declining in technical competence and their morale for accomplishing their duties on board vessels has greatly falled won compared with that of old days. The above result inevitably brings many problems in operating modern vessels and causes accidents which are avoidable through good competence and high morale of the crew. We intend to analyze the causes of several great sea accident with which it seems some human errors are connected more or less directly or indirectly. We hope that this study could suggest some measures which help to prevent the recurrence of similar accidents by Korean ship's crews.

• Structural Engineering and Mechanics
• /
• v.46 no.5
• /
• pp.673-693
• /
• 2013

This paper presents a systematic design and training procedure for the feed-forward back-propagation neural network (NN) modeling of both forward and inverse behavior of a rotary magnetorheological (MR) damper based on experimental data. For the forward damper model, with damper force as output, an optimization procedure demonstrates accurate training of the NN architecture with only current and velocity as input states. For the inverse damper model, with current as output, the absolute value of velocity and force are used as input states to avoid negative current spikes when tracking a desired damper force. The forward and inverse damper models are trained and validated experimentally, combining a limited number of harmonic displacement records, and constant and half-sinusoidal current records. In general the validation shows accurate results for both forward and inverse damper models, where the observed modeling errors for the inverse model can be related to knocking effects in the measured force due to the bearing plays between hydraulic piston and MR damper rod. Finally, the validated models are used to emulate pure viscous damping. Comparison of numerical and experimental results demonstrates good agreement in the post-yield region of the MR damper, while the main error of the inverse NN occurs in the pre-yield region where the inverse NN overestimates the current to track the desired viscous force.

• The KIPS Transactions:PartD
• /
• v.11D no.1
• /
• pp.163-172
• /
• 2004

In the software development project applying object-oriented development methodology, the research on the UCP(Use Case Point) as a method to estimate development effort is being carried on. The existing research proposes the linear model calculating the development effort that multiplies an invariant on AUCP(Adjusted Use Case Point) which applied technical and environmental factors. However, the statistical model that estimates the development effort using AUCP and UUCP(Unadjusted Use Case Point) is not being studied. The irrelevant relationship of the linear regression model, whose development period is increasing tremendously as the software size increases, is confirmed. Moreover, during the UCP calculating process, there can be errors in FP by applying the TCF(Technical Complexity Factor) and EF(Environmental Factor). This paper presents a non-linear regression model, that does not consider the TCF and EF, and that estimate the development effort from UUCP directly by utilizing the exponential function. An exponential function is selected among the linear, logarithm, polynomial, power, and exponential model via statistical evaluations of the models mentioned above.

• Journal of Digital Convergence
• /
• v.18 no.2
• /
• pp.205-211
• /
• 2020

The method of predicting the future may be predicted by technical characteristics or technical performance. Therefore, technology prediction is used in the field of strategic research that can produce economic and social benefits. In this study, we predicted the future market through the study of how to predict the future with these technical characteristics. The future prediction method was studied through the prediction of the time when the market occupied according to the demand of special product. For forecasting market demand, we proposed the future forecasting model through comparison of representative quantitative analysis methods such as CAGR model, BASS model, Logistic model and Gompertz Growth Curve. This study combines Rogers' theory of innovation diffusion to predict when products will spread to the market. As a result of the research, we developed a methodology to predict when a particular product will mature in the future market through the spread of various factors for the special product to occupy the market. However, there are limitations in reducing errors in expert judgment to predict the market.

• Korean Journal of Radiology
• /
• v.22 no.6
• /
• pp.901-911
• /
• 2021

Objective: To evaluate the technical applicability of a semiautomatic three-dimensional (3D) hybrid CT segmentation method for the quantification of right ventricular mass in patients with cardiovascular disease. Materials and Methods: Cardiac CT (270 cardiac phases) was used to quantify right ventricular mass using a semiautomatic 3D hybrid segmentation method in 195 patients with cardiovascular disease. Data from 270 cardiac phases were divided into subgroups based on the extent of the segmentation error (no error; ≤ 10% error; > 10% error [technical failure]), defined as discontinuous areas in the right ventricular myocardium. The reproducibility of the right ventricular mass quantification was assessed. In patients with no error or < 10% error, the right ventricular mass was compared and correlated between paired end-systolic and end-diastolic data. The error rate and right ventricular mass were compared based on right ventricular hypertrophy groups. Results: The quantification of right ventricular mass was technically applicable in 96.3% (260/270) of CT data, with no error in 54.4% (147/270) and ≤ 10% error in 41.9% (113/270) of cases. Technical failure was observed in 3.7% (10/270) of cases. The reproducibility of the quantification was high (intraclass correlation coefficient = 0.999, p < 0.001). The indexed mass was significantly greater at end-systole than at end-diastole (45.9 ± 22.1 g/m² vs. 39.7 ± 20.2 g/m², p < 0.001), and paired values were highly correlated (r = 0.96, p < 0.001). Fewer errors were observed in severe right ventricular hypertrophy and at the end-systolic phase. The indexed right ventricular mass was significantly higher in severe right ventricular hypertrophy (p < 0.02), except in the comparison of the end-diastolic data between no hypertrophy and mild hypertrophy groups (p > 0.1). Conclusion: CT quantification of right ventricular mass using a semiautomatic 3D hybrid segmentation is technically applicable with high reproducibility in most patients with cardiovascular disease.

• KDI Journal of Economic Policy
• /
• v.12 no.4
• /
• pp.21-46
• /
• 1990

This paper, a sequel to Yoo and Lee (1990), attempts to investigate the interindustry determinants of technical efficiency in Korea's manufacturing industries, and also to conduct an exploratory analysis on the stability of technical efficiency over time. The hypotheses set forth in this paper are most found in the existing literature on technical efficiency. They are, however, revised and shed a new light upon, whenever possible, to accommodate any Korea-specific conditions. The set of regressors used in the cross-sectional analysis are chosen and the hypotheses are posed in such a way that our result can be made comparable to those of similar studies conducted for the U.S. and Japan by Caves and Barton (1990) and Uekusa and Torii (1987), respectively. It is interesting to observe a certain degree of similarity as well as differentiation between the cross-section evidence on Korea's manufacturing industries and that on the U.S. and Japanese industries. As for the similarities, we can find positive and significant effects on technical efficiency of relative size of production and the extent of specialization in production, and negative and significant effect of the variations in capital-labor ratio within industries. The curvature influence of concentration ratio on technical efficiency is also confirmed in the Korean case. There are differences, too. We cannot find any significant effects of capital vintage, R&D and foreign competition on technical efficiency, all of which were shown to be robust determinants of technical efficiency in the U.S. case. We note, however, that the variables measuring capital vintage effect, R&D and the degree of foreign competition in Korean markets are suspected to suffer from serious measurement errors incurred in data collection and/or conversion of industrial classification system into the KSIC (Korea Standard Industrial Classification) system. Thus, we are reluctant to accept the findings on the effects of these variables as definitive conclusions on Korea's industrial organization. Another finding that interests us is that the cross-industry evidence becomes consistently strong when we use the efficiency estimates based on gross output instead of value added, which provides us with an ex post empirical criterion to choose an output measure between the two in estimating the production frontier. We also conduct exploratory analyses on the stability of the estimates of technical efficiency in Korea's manufacturing industries. Though the method of testing stability employed in this paper is never a complete one, we cannot find strong evidence that our efficiency estimates are stable over time. The outcome is both surprising and disappointing. We can also show that the instability of technical efficiency over time is partly explained by the way we constructed our measures of technical efficiency. To the extent that our efficiency estimates depend on the shape of the empirical distribution of plants in the input-output space, any movements of the production frontier over time are not reflected in the estimates, and possibilities exist of associating a higher level of technical efficiency with a downward movement of the production frontier over time, and so on. Thus, we find that efficiency measures that take into account not only the distributional changes, but also the shifts of the production frontier over time, increase the extent of stability, and are more appropriate for use in a dynamic context. The remaining portion of the instability of technical efficiency over time is not explained satisfactorily in this paper, and future research should address this question.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1084-1087
• /
• 2002

This paper presents an improved fuzzy logic-based adaptive PWM technique. A fuzzy logic- based adaptive PWM technique determines the optimal output voltage vector which takes into account both direction of back-emf and direction of current error vector. This technique has a simple structure and a good level of stability, but it has disadvantages. The longer sampling period, the larger current error. Because there is no considerations of the current error magnitude of each phases. The proposed method improves the control performance by selecting the optimum switching pattern in which the magnitudes of current errors are considered introducing space vector concept. Simulation results using Matlab/Simulink show that the proposed control method reduces current error keeping the merit of previous one.

• Journal of the Korean Home Economics Association
• /
• v.44 no.8
• /
• pp.127-142
• /
• 2006

This study, systematically evaluated the services provided by consumer organization site in order to improve the possessing problems or deficient aspects and present a desirable direction for instituting the planning of a new consumer group site. An evaluation of the level with respect to contents of consumer organization site showed that communication had the lowest grade while design had the highest. There were some technical errors related to accessibility of the site. An examination of the quality of consultation showed that success rate was low and the contents of the consultation were inadequate. However, compared with service quality of the consumer organization site estimated in the year of 2000, the current service showed significant improvements in terms of the overall quantity of information.