• Journal of Satellite, Information and Communications
• /
• v.12 no.3
• /
• pp.41-49
• /
• 2017

This paper will describe lunar lava tubes' five analyzed fields, such as geology, geomorphology, internal configuration, stability, communication and habitats requirements. This research gets through qualitative and qualitative data analysis as following results. A huge size and configuration differences between lunar lava tubes and earth one on geology and landform environments. Exo-genetics activities, such as meteorites, radiation, and sudden temperature bigger affect than Endo-genetic activities, such as effusion and earthquake of the lunar lava tubes. Landform and internal configuration of the lunar lava tubes due to the huge cave perilous landform that gravity difference have a technical limitation from internal approach and data obtain of the huge skylights and sinuous rilles. Stability of the lunar lava tubes deals with geology and landform. It was obvious geo-structural stability elements results generated on low rate of collapsed halls(skylights), low gravity, and relatively thick covers. In terms of the communication capability on the external and internal lunar lava tubes cordless communication techniques will overcome limitations of the sun-power generates supporting communication systems. Through this research it realized obvious differs between potential habitats possibility by accumulative theories by scholars and techniques of the lunar lava tubes. Especially, it is a favorable expectation throughout overcoming attempt on zero gravity, cosmo radiation, lunar dust of the exo-genetic limitations to the steep escarpment of skylights to approach and achieve techniques by the civil engineering, networking and GIS techniques as the endo-genetic environment treatment.

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.1-4
• /
• 2014

A radio communication system has interference caused by other radio transmitters operated in co-channel or adjacent channels. Therefore technical specifications are made by considering and investigating the effects of interference between the new system and present systems when the new system will be started to serve in the near future. FTS is used for preventing an abnormal mission and guaranteeing public protection. Recently the next generation FTS's are researched to reinforce the security and to increase the operating capability of simultaneous use. EFTS known as one of the next generation FTS's is suitable for such purposes. In this paper the effects of interference signals on the performance of EFTS are investigated. Noncoherent DPSK and noncoherent CPFSK are considered for the modulation method of EFTS and a FMCW and a pulse RADAR considered as a interferer. The power of FMCW is 20.3dB lower than the power of EFTS and the power of pulse RADAR is 19.1dB lower than that of EFTS. Simulation results show that FMCW interferer reduce $E_b/N_o$ of about 1dB and $E_b/N_o$ of EFTS deteriorates about 0.5dB due to interference signals generated from pulse RADAR.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.3 s.31
• /
• pp.130-137
• /
• 2006

Since Lean Construction has been introduced in 1992, much research is in progress to popularize lean concepts and principles. Most research focuses on developing lean concepts and tools and strengthening the limited domain of instrumental rationality and technical efficiency. However, the basic concepts of human resource management seem to be ignored by those who advocate lean production. Thus, the lean construction research related to human resource management must be once considered for popularization and activation of lean construction at the beginning stage in the domestic construction industry. Because human resources have a major influence on lean implementation and its success, especially at the beginning stage of lean construction. This paper considers the human resource requirements for the implementation of lean construction in the USA construction industry. The results from the study will provide the foundations to adapt lean construction into the domestic construction industry. Consequently, the study found that lean construction could improve the capability of human resource and human motivation if effectively implemented in the construction sites. Since lean construction emphasizes and focuses on improvement of relationships among project participants, constant application to human resource management is crucial for successful lean implementation.

• Journal of Science of Art and Design
• /
• v.11
• /
• pp.79-108
• /
• 2007

"Printing is an Art of reproduction & a Technique of However printing has extended its limitation from a genre of reproduction itself and now it stands on the turning point as an art such as painting or sculpture which expresses artist's originality. Early Printing has had relations in depth with press printing in terms of information recording, preservation, and transmission. It was acknowledged value in a way of information satisfaction different from how it is valued as a pure art today. But, later printing has transferred its function from a mean of reproduction to pure art due to the development of printing skills and photography invention. It can be said that the concept of modern printing is taking over its genealogy as a creative work not as just printing. Also its expression capability is widen to dimensional printing and high-tech multimedia from original tradition techniques. As we discussed above, modern painting is very open to various changes. This modern painting aspect can be seen as an extended interpretation of 'board' concept. This dissertation raises a question why monotype and monoprint couldn't secure its position in printing history in spite of numerous artists' tryouts in its way. Monotype and monoprint fundamentally based on intaglio technique in its history. Yet, its systematic study hasn't been worked out. This is because of the lack of recognition of monotype and monoprint's originality as printing. Especially in monoprint, it has known as an early stage in copperplate printing process which is an attempt to solve the technique limitation or trial work for edition. Likewise the reason why monotype and monoprint remains at the edge of printing border ambiguously is because of conceptual, technical characteristics which are against traditional printing. In traditional printing, the concept of board is important as a method of reproduction. Different from the fact, monotype and monoprint accept the form of medium 'board' conceptually out of limited condition as mentioned. Thus monotype and monoprint hasn't stand out for several reasons until late 20th century when it started come out to public as people starts to have interests that works from famous artists are actually based on monotype and monoprint. This dissertation likes to step into the monotype and monoprint theoretically which is not well known in domestic and try to study the meaning of monotype and monoprint as a printing medium which is also hasn't been considered sincerely. For this study the process follow as below. First, look into how monotype and monoprint has a concept and history. Next, check differences through comparison with traditional printing and how printing can be understood in what aspects at the same time. After, verify how monotype and monoprint have influence on the acceptance of extended concept of 'board'. This study will show the expressional possibility of monotype and monoprint which has already known as 'tableau printing' in today's situation where adventurous experiments of printing medium are going on with the development of technology.

• Asian Journal of Atmospheric Environment
• /
• v.12 no.3
• /
• pp.232-243
• /
• 2018

The construction, development and maintenance of an economically, environmentally and socially sustainable campus involves the integration of measuring tools and technical information that invites and encourages the community to know the actual state to generate positive actions for reducing the negative impacts over the local environment. At the Universidad Nacional de Colombia - Campus $Bogot{\acute{a}}$, a public area with daily traffic of more than 25000 people, the Environmental Management Bureau has committed with the monitoring of the noise pollution and air quality, as support to the campaigns aiming to reduce the pollutant emissions associated to the student's activities and campus operation. The target of this study is based in the implementation of mobile air quality and sonometry monitoring equipment, the mapping of the actual air quality and noise pollution inside the university campus as a novel methodology for a sub-area inside a megacity. This results and mapping are proposed as planning tool for the institution administrative sections. A mobile Kunak$^{(R)}$ Air & OPC air monitoring station with the capability to measure particulate matter $PM_{10}$, $PM_{2.5}$, Ozone ($O_3$), Sulfur Oxide ($SO_2$), Carbon Monoxide (CO) and Nitrogen Oxide ($NO_2$) as well as Temperature, Relative Humidity and Latitude and Longitude coordinates for the data georeferenciation; and a sonometer Cirrus$^{(R)}$ 162B Class 2 were used to perform the measurements. The measurements took place in conditions of academic activity and without it, with the aim of identify the impacts generated by the campus operation. Using the free code geographical information software QGIS$^{(R)}$ 2.18, the maps of each variable measured were developed, and the impacts generated by the operation of the campus were identified qualitative and quantitively. For the measured variables, an increase of around 21% for the $L_{Aeq}$ noise level and around 80% to 90% for air pollution were detected during the operation period.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.8
• /
• pp.462-469
• /
• 2017

Eutrophication and shortage of phosphate ore raise the necessity of phosphate removal and recovery from wastewater treatment plants. Especially, a sludge treatment system containing highly concentrated phosphate should be targeted for phosphate removal and recovery. This study thus aimed to evaluate the capability of the struvite crystallization process for phosphate removal and recovery from a sludge treatment system of a wastewater treatment plant. Analysis on phosphate concentrations and masses in the sludge treatment system revealed that digested sludge and centrate have phosphate concentrations and masses, high enough to adopt the struvite crystallization process. Chemical equilibrium modeling indicated that the struvite crystallization reaction substantially occurred with pH higher than 8 and $Mg^{2+}$ concentration 1.2 times higher than its theoretical requirement. A series of batch tests with digested sludge and centrate indicated that the phosphate removal reaction by struvite crystallization followed a first-order kinetics and reached over 80% removal efficiency at equilibrium. Aeration in the batch tests was found to purge $CO_2$ in sludge or centrate and increase pH up to 8.7, without adding NaOH. Thus, we concluded that the struvite crystallization process could be an efficient and economical process for phosphate removal and recovery from a wastewater treatment plant.

• Journal of Satellite, Information and Communications
• /
• v.3 no.1
• /
• pp.41-47
• /
• 2008

Line-of-sight communications cannot easily support korean armed forces because of mountainous terrain. ADD(Agency for Defense Development) introduced ANASIS(Army Navy Air-force Satellite Information System) to meet the Korean warfighter's operational needs. Currently, army's military satcom terminal is designed for either fixed site or on-the-pause operation. The US army is under development of multi-band integrated on-the-move satellite terminals to let the army's communication capability to keep pace with globally deployable Joint Task Force for network-centric application. In this paper we analyzed X-band and Ka-band link and subsystem requirement. Our focus here is to describe key technical issues. Especially, On the basis of 3dB beam width of 0.9m antenna, Tracking accuracy and disturbances compensation signal processing on-the-move of Antenna Tracking system is analyzed. Also, protocol is analyzed that minimize blockage on the move due to an obstacle. when the received signal blocked, it stop to transmit burst signal and retransmit when blockage removed through received synchronization signal monitoring. Analyzed specification will be used to make prototype terminal to analyze risk for mass production

• Journal of Korea Technology Innovation Society
• /
• v.8 no.spc1
• /
• pp.297-322
• /
• 2005

The paper aims to analyze the logic and power of open source software (OSS), and to show the ways in which Korean government and companies support developing countries in the field of software development. Many developing countries are considering software industry to be a strategic industry due to the fact that software industry seems to be labor-intensive, or rather knowledge-intensive industry. In this regard, developing countries without huge financial investment can achieve certain level of economic development while leveraging software industry. Concerning software development tools, among recent trends OSS has been regarded as a viable alternative software development tool for developing countries. In developing countries, OSS is believed to resolve some difficulties caused by proprietary software such as Microsoft Windows, which is too expensive to buy for users and developers in low-income developing countries. In this sense, OSS has been considered as only solution for software developing because OSS is able to reduce the cost of software development and to enhance the technological capabilities of developing countries. In addition to the benefit of low cost, we have to shed light on the business model of OSS that is not to sell software licence, but to provide technical support and services. In order to use OSS as much as they can, developing countries have to invest for educating human resources who can develop and implement software system using OSS. These OSS-related policies can lead developing countries to developed countries.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.86-95
• /
• 2006

Brillouin backscatter is a type of reflection that occurs when light is shone into an optical fibre. Brillouin reflections are very sensitive to changes in the fibre arising from external effects, such as temperature, strain and pressure. We report here several case studies on the measurement of strain using Brillouin reflections. A mechanical bending test of an I beam, deployed with both fiber optic sensors and conventional strain gauge rosettes, was performed with the aim of evaluating: (1) the capability and technical limit of the DTSS technology for strain profile sensing; (2) the reliability of strain measurement using fiber optic sensor. The average values of strains obtained from both DTSS and strain gauges (corresponding to the deflection of I beam) showed a linear relationship and an excellent one-to-one match. A practical application of DTSS technology as an early warning system for land sliding or subsidence was examined through a field test at a hillside. Extremely strong, lightweight, rugged, survivable tight-buffered cables, designed for optimal strain transfer to the fibre, were used and clamped on the subsurface at a depth of about 50cm. It was proved that DTSS measurements could detect the exact position and the progress of strain changes induced by land sliding and subsidence. We also carried out the first ever distributed dynamic strain measurement (10Hz) on the Korean Train eXpress(KTX) railway track in Daejeon, Korea. The aim was to analyse the integrity of a section of track that had recently been repaired. The Sensornet DTSS was used to monitor this 85m section of track while a KTX train passed over. In the repaired section the strain increases to levels of 90 microstrain, whereas in the section of regular track the strain is in the region of 30-50 microstrain. The results were excellent since they demonstrate that the DTSS is able to measure small, dynamic changes in strain in rails during normal operating conditions. The current 10km range of the DTSS creates a potential to monitor the integrity of large lengths of track, and especially higher risk sections such as bridges, repaired track and areas at risk of subsidence.

• Information Systems Review
• /
• v.8 no.3
• /
• pp.201-223
• /
• 2006

This study surveys the current state of the art in the field of IT investment and performance in domestic finns and investigates the statistical significance of various hypothesis of previous relevant researches. Data of 145 information systems of 133 firms have been collected. The amount of IT budget in 2005 has increased to the level of 2.53% of gross revenue of the firms and IT business value has also increased as compared to the previous year. As results of MANOVA test, it has been found that the amount of IT budget does not affect the level of IT business value. In other words, the relationship between IT investment and IT business value does not exist. And among ten factors which has been known to determine IT business value in previous researches, only three factors have been found to affect the level of IT business value: the technical quality of information systems, CIO leadership in the context of resource allocation and decision makings, and the capability and commitment of the user department. These finding provide insight for both practitioners and researchers.