• 한국결정성장학회지
• /
• 제17권4호
• /
• pp.151-155
• /
• 2007

녹색 광 발진을 위해 조화용융조성의 MgO가 첨가된 $LiNbO_3$ 결정을 이용하여 준위상정합 2차 조화파 도파로 소자를 제작하였다. 도메인 반전을 위해 +Z면에 주기적인 전극 패턴을 형성하였으며, 외부전계의 균일한 인가를 위해 LiCl 전해 용액을 사용하여 도메인을 반전 시켰다. 선택적 화학식각을 통해, 약 $6.8{\mu}m$의 분극 반전 주기를 확인 할 수 있었으며, $7{\mu}m$ ridge 높이와 $3{\mu}m$의 slap높이를 갖는 폭 $5{\mu}m$의 PPMgLN ridge-type 도파로 소자의 비선형 특성을 측정하였다.

• 임상간호연구
• /
• 제23권3호
• /
• pp.267-280
• /
• 2017

Purpose: The purpose of this study was to describe the status of infection control nurses (ICNs) and their activities, and to identify the factors affecting the level of infection control activities. Methods: Data were collected from 199 hospitals from June 24 to July 26, 2016. The structured questionnaires included status of infection control nurses, type and level of infection control activities. Results: Most participating hospital were advanced general hospital (20.1%) and general hospital (67.8%). Among the hospitals, 86.4% had an infection control department (ICD). The average hospital work experience of ICNs was 14.62 years, and their average infection control career was for 4.94 years. Among the ICNs, 85.6% worked in full time and the average number of beds per ICN was 311.21. There were significant differences in the existence of ICD, infection control activities including surveillance, outbreak investigation, negative pressure room, hand hygiene monitoring, disinfection, and sterilization according to hospital size. The level of infection control activities was higher with more number of ICNs, ICN employment as full time, and healthcare institution accreditation status. The explanatory power was 37.5%. Conclusion: These results of this study which reflect infection control status of healthcare facilities with more than 150 beds in 2016 will provide baseline data to establish infection control system in small to medium sized hospitals after the Middle East Respiratory Syndrome outbreak in 2015.

• 복식문화연구
• /
• 제14권5호
• /
• pp.728-738
• /
• 2006

As movies and dramas which show traditional clothes and fusion clothes are getting popular these days, lot of people are paying attention to these dress and ornaments. And as for the domestic collections which seem to reflect this trend, various fusion style clothes are getting widely adopted by people. Therefore, this study analyzed and considered the clothes designs when the country started to open itself to other countries, by selecting a movie titled "YMCA baseball team", a movie to ascertain vigorous historical verification, and by conducting the prior study and using the DVD capture program. This study is meaningful in that based on the comparison study on the costumes, it clarifies the degree of costumes(clothes) acceptance at the point of nation's opening to other countries, which is the source of fusion style, and further shed light on the role that the movie costumes will play. From this study, we can get the following conclusions. First, through the theoretical background it can be known that when the country opened itself to outside world the dress and ornaments of the time was adopted in a top-down way, namely, first adopted by the royal family and the upper class, which could have easy access to the western civilization and institutions, and then the low class later. Second, in the movie titled 'YMCA baseball team' the costumes were designed through the strict and thorough historic verification, and it can be confirmed that various dress and ornaments adopted at the time of nation's opening to the outside world centered around the clothes design for new women. Third, 'YMCA baseball team is evaluated as a movie that reproduces that time well and as a media that provides an effective clue to the dress and ornaments adopted by the public when the country opened itself to the outside world.

• 한국결정성장학회지
• /
• 제16권2호
• /
• pp.53-58
• /
• 2006

조화용융조성 $LiNbO_3$ 결정에 외부 전계를 인가하였을 때 초기 도메인 생성 및 이동에 관하여 연구하였다. 0.5mm 두께의 $LiNbO_3$ 결정에 23.5, 22.0, 21.0kV/mm의 전계를 인가하였을 때 도메인 벽은 각각 28.70, 16.02, $5.75{\mu}m/sec$의 속도를 나타내었다. 분극 반전 시스템에 전류 제어를 위한 외부저항으로 $1 M{\Omega}$을 사용하였을 시 너무 빠른 도메인 성장으로 인하여 원활한 분극 반전 제어가 이루어지지 않으므로 $10 M{\Omega}$ 외부저항을 사용하여 전하량을 제어하여 50% duty cycle을 가진 주기적 분극 반전 $LiNbO_3$ 결정을 제작하였다.

• 한국결정성장학회지
• /
• 제16권2호
• /
• pp.49-52
• /
• 2006

저손실 Ti:$LiNbO_3$ 광도파로 기판에 외부전계 인가법을 사용하여 주기적으로 도메인을 반전시켰다. $LiNbO_3$의 -Z 면에 Ti 패턴 형성 후 약 $1060^{\circ}C$에서 열처리 과정을 통해 광도파로를 형성하였으며, 제작된 광도파로의 광전송 손실은 ${\sim}0.1dB/cm$ 였다. 도메인 반전을 위해 +Z면에 주기적인 전극 패턴을 형성하였으며, 외부전계의 균일한 인가를 위해 LiCl 전해 용액을 사용하여 도메인을 반전 시켰다. 선택적 화학식각을 통해, 약 $16{\mu}m$의 도메인 반전 주기를 확인 할 수 있었으며, 주기적 도메인 반전구조를 갖는 Ti : $LiNbO_3$ 도파로의 비선형 특성을 측정하였다.

• 한국산업보건학회지
• /
• 제23권2호
• /
• pp.50-56
• /
• 2013

Objectives: The present study investigated cytotoxicity and DNA damage in human lung cells in vitro. Methods: Neodymium oxide and lanthanum oxide were dispersed by ultrasonic treatments. The assay was performed with MRC-5 (Human male fetus lung cell). Cytotoxicity and comet assay of lanthanum oxide and neodymium oxide were measured after 24 and 48 hours incubation. Results: After 24 hours of exposure to rare earth metals, the cytotoxicities of lanthanum oxide in more than $1{\mu}M$ concentration groups were significantly increased when compared to the control group, but the cytotoxicities of neodymiun oxide in more than $100{\mu}M$ concentration groups were statistically increased. After 48 hours exposure, cytotoxicities of both materials were statistically increased in $100,000{\mu}M$ concentration groups. Olive tail moments of the lanthanum oxide treated group were significantly increased when compared to the control group. Conclusions: The cytotoxicity of lanthanum oxide was higher than that of neodymium oxide. The DNA of MRC-5 cells treated with lanthanum oxide for 48 hours were significantly damaged.

• 대한본초학회지
• /
• 제27권4호
• /
• pp.53-58
• /
• 2012

Objective : Obesity is often defined as a condition associated with accumulations of excessive body fats which resulting from disorder of energy balance in term of energy intake and energy expenditure. Methods : The effects of natural mixture (T) for inhibition of lipid metabolism on the liver, epididymal fat pads and pancreatic zymogen granules of high fat diet (HFD) supplied rats were observed by histopathology and histomorphometry. Results : As results of HFD supply, severe steatohepatitis such as increases of mean diameters of hepatocytes and the percentages regions of fatty changes was detected. In addition, hypertrophy of adipocytes (increase of mean diameters of epididymal fat pads) was also detected with dramatic decreases of pancreatic zymogen granules at histopathological and histomorphometrical observations. However, theses steatohepatitis and hypertrophy of adipocytes induced by HFD supply were inhibited by treatment of 5 % and 10 % T (T5, T10), respectively. Well corresponded as the results of adipocyte hypertrophy and steatohepatitis, the decreases of pancreatic zymogen granules were also dose-dependently inhibited by T treatment as compared with HFD control, respectively. Conclusion : In conclusion, based on the results, it is considered that test materials, T5 and T10, will be showed hepatoprotective and anti-obese effects, may be directly and/or indirectly mediated by pancreatic zymogen granules because they dose-dependently inhibited steatohepatitis, hypertrophy of adipocytes and decreases of pancreatic zymogen granules induced by HFD supply, respectively.

• 한국식품조리과학회지
• /
• 제22권2호
• /
• pp.122-130
• /
• 2006

This study was conducted to investigate the consumer perceptions of Koreans and foreigners towards Korean and Thai foods and restaurants. Self-administered questionnaires were collected from 129 foreign residents and 291 Koreans who have been members or the Thai travel association in the seoul area. statistical data analysis was performed using the SPSS v 10.0 program. From the evaluation of Korean and Thai foods and restaurants by foreigners, Thai foods/restaurants showed significantly higher ratings in the attributes of 'Food appearance', 'Food smell', 'Overall food taste', and 'Exotic food taste' In the attributes of 'Use of various food seasonings', 'Variety of food ingredients', 'Variety of menu', 'Food sanitation', and 'Fast restaurant service', Thai food/restaurants showed higher ratings than Koreanfood/restaurants. Korean foods were considered more salty than Thai foods. However, overall satisfaction of Thai and Korean foods/restaurants was similar at about '3.7' points on the 5-point Likert scale. From the evaluation by Koreans, there were no significant differences in the attributes of 'Food appearance', 'Food smell', and 'overall food taste'. however. the rating or 'Exotic food taste' was significantly higher in Thai foods. In the attributes of 'Use of various food seasonings', 'Variety of food ingredients', and 'Variety of menu', Thai food/restaurants showed higher ratings than Korean food/restaurants. Interestingly, the evaluation of sanitation of restaurants was opposite to that of foreigners.

• 한국GIS학회:학술대회논문집
• /
• 한국GIS학회 1999년도 추계학술대회 발표요약문
• /
• pp.47-51
• /
• 1999

Geo-features play a key role in object-oriented or feature-based geo-processing system. So the strategy for how-to-model and how-to-manage the geo-features builds the main architecture of the entire system and also supports the efficiency and functionality of the system. Unlike the conventional 2D geo-processing system, geo-features in 3D GIS have lots to be considered to model regarding the efficient manipulation and analysis and visualization. When the system is running on the Web, it should also be considered that how to leverage the level of detail and the level of automation of modeling in addition to the support for client side data interoperability. We built a set of 3D geo-features, and each geo-feature contains a set of aspatial data and 3D geo-primitives. The 3D geo-primitives contain the fundamental modeling data such as the height of building and the burial depth of gas pipeline. We separated the additional modeling data on the geometry and appearance of the model from the fundamental modeling data to make the table in database more concise and to allow the users more freedom to represent the geo-object. To get the users to build and exchange their own data, we devised a fie format called VGFF 2.0 which stands for Virtual GIS File Format. It is to describe the three dimensional geo-information in XML(extensible Markup Language). The DTD(Document Type Definition) of VGFF 2.0 is parsed using the DOM(Document Object Model). We also developed the authoring tools for users can make their own 3D geo-features and model and save the data to VGFF 2.0 format. We are now expecting the VGFF 2.0 evolve to the 3D version of SVG(Scalable Vector Graphics) especially for 3D GIS on the Web.

• 한국GIS학회:학술대회논문집
• /
• 한국GIS학회 1999년도 추계학술대회 발표요약문
• /
• pp.66-71
• /
• 1999

For given 3D geographic data which is usually of DEM(Data Elevation Model) format, we have to represent and manipulate the data in various ways. For example, we have to draw a part of them in drawing canvas. To do this we give users a way of selecting area they want to visualize. And we have to give a base tool for users to select the local area which can be chosen for some geographic operation. In this paper, we propose a 3D data processing method for representation and manipulation. The method utilizes the major properties of DEM and TIN(Triangular Irregular Network), respectively. Furthermore, by approximating DEM with a TIN of an appropriate resolution, we can support a fast and realistic surface modeling. We implement the structure with the following 4 level stages. The first is an optimal resolution of DEM which represent all of wide range of geographic data. The second is the full resolution DEM which is a subarea of original data generated by user's selection in our implemeatation. The third is the TIN approximation of this data with a proper resolution determined by the relative position with the camera. And the last step is multi-resolution TIN data whose resolution is dynamically decided by considering which direction user take notice currently. Specialty, the TIN of the last step is designed for realtime camera navigation. By using the structure we implemented realtime surface clipping, efficient approximation of height field and the locally detailed surface LOD(Level of Detail). We used the initial 10-meter sampling DEM data of Seoul, KOREA and implement the structure to the 3D Virtual GIS based on the Internet.