• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.149-154
• /
• 1993

In heavy grinding that is on of the high efficient grinding method, meaningful deformation is generated by high temperature. So, after machining, geomeric error generated od the workpiece. The most important factor on the geometric error is temperature difference between upper layer and lower layer (T $_{d}$) . Relations between Td and grinding condition and maximum geometric error and grinding condition are obtained by experiment. This relations are used in fuzzy algorithm for improvement geometric accuracy. The main results are follows : (1) The linear relation between maximum geometric error and grinding condition is ovtained by experiment. (2) The linear relation between maximum temperature difference between upper layer and lower layer and grinding condition is ovtained by experiment. (3) Control peth of wheel for improvement geometric accuracy is obtained by using the fuzzy algorithm.m.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1404_1405
• /
• 2009

For quantitative understanding of gas discharge phenomena, we should know electron collision cross section. $GeH_4$ is used in many applications with $Si_2H_6$ gas, such as amorphous alloy, a thin film of silicon and solar cell. Therefore, we understand the electron transport characteristics and analysed the electron transport coefficients, the electron drift velocity W, the longitudinal and transverse diffusion coefficient $ND_L$ and $ND_T$, and the ionization coefficient $\alpha$/N in $GeH_4$gas over the E/N range from 0.01 to 1000 Td by two-term approximation of the Boltzmann equation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.181-184
• /
• 2002

The electron transport coefficients in Air is analysed in range of E/N values from 100~1000(Td) by a MCS and BE method. This paper have calculated W, $ND_L$,$ ND_T$, Mean energy mixtures by $N_2+O_2$. The results gained that the values of the electron swarm parameters such as the electron drift velocity, longitudinal and transverse diffusion coefficients.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2003.10a
• /
• pp.136-136
• /
• 2003

Mainly due to deficiencies in nuclear reprogramming, gene expression and DNA fragmentation, which result in early and late embryonic losses, the overall success rate achieved by cloning techniques to date is low. This present study compared the incidences of DNA fragmentation during development of IVF, parthenotes (PT), nuclear transfer (NT) and transgenic (TG) embryos. Terminal deoxynucleotidyl transferase (TdT) nick-end labelling (TUNEL) with propidium iodide counter staining was used for determination of DNA fragmentation and total number, respectively. TG and NT donor cells were fetal fibroblasts with or without transfection with EGFP, and cultured in DMEM+15% FCS until confluent, for 5 days. At 19 h post-maturation (hpm), enucleated oocytes were reconstructed with donor cells and activated at 24 hpm with the combinations of ionomycin (5 M, 5 min) and cyclo-heximide (10 g/ml, 5 h) after electric fusion by a single DC pulse (1.6 KV/cm, 60 sec). Parthenotes were produced by the same activation protocol at 24 hpm. (중략)

• Nuclear Engineering and Technology
• /
• v.40 no.3
• /
• pp.191-198
• /
• 2008

The influence of fission products' contents on the DUPIC fuel powder and pellet properties was experimentally evaluated using SIMFUEL as a surrogate for actual spent PWR fuel due to the high radioactivity of spent fuel. Pure $UO_2$ and SIMFUEL pellets with fission products equivalent to a burn-up of 35,000 MWd/tU and 60,000 MWd/tU were used as impurities in this study. The specific surface area of the powder milled after the OREOX treatment increased and resulted in sintered pellets with a theoretical density (TD) higher than 95%, regardless of the impurity contents. However, the grain size of the sintered pellets decreased with the increasing impurity contents. As a result of the dissolved oxides in $UO_2$ from the impurity groups, the specific surface area of the OREOX powder increased with an increase of the impurities. The grain size of the sintered pellets was significantly decreased by the metallic and oxide precipitates.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.216-221
• /
• 1998

A study on induction plasma deposition with ceramic materials, yttria-stabilized-zirconia ZrO$_2$-Y$_2$O$_3$ (m.p 264O $^{\circ}C$), was conducted with a view developing a new method for nuclear fuel fabrication Before making dense pellets more than 96％TD., the spraying condition was optimized through the process parameters, such as chamber pressure, plasma plate power powder spraying distance, sheath gas composition, probe position, particle size and powders different morphology. The results with a 5mm thick deposit on rectangular planar graphite substrates showed a 97.11％ theoretical density when the sheath gas flow rate was Ar/H$_2$120/20 l/min, probe position 8cm, particle size -75 ${\mu}{\textrm}{m}$ and spraying distance 22cm by AMDRY146 powder. The degree of influence of the main effects on density were powder morphology. particle size, sheath gas composition, plate power and spraying distance, in that order. Among the two parameter interactions, the sheath gas composition and chamber pressure affects density greatly. By using the multi-pellets mold wheel type, the pellet density did not exceed 94%T.D., owing to the spraying angle.

• Journal of Yeungnam Medical Science
• /
• v.14 no.2
• /
• pp.359-369
• /
• 1997

We studied the expression of the cell surface antigen associated with myeloid and lymphoid leukemias on bone marrow or peripheral blood blast cells from 153 leukemic patients including 61 cases of acute myelogenous leukemias(AML), 46 of acute lymphocytic leukemias(ALL) and 12 of acute leukemias. They were analyzed by direct or indirect immunofluorescence method for reactivity with the monoclonal antibodies to B cells(CD10, CD19, SmIg), T cells(CD2, CD5, CD7, CD3, CD4, CD8), myeloid antigen(CD13, CD14, CD33, CD61) and a nonspecific antigen, HLA-DR. Lymphoid associated markers detected on AML is CD7 32.8%, CD10 14.8%, CD5 13.1%, CD2 6.6% and CD19 1.6%. TdT was positive in 4.9% of AMLs. Hybrid leukemias were 8 cases out 61 AML cases and were mainly composed of monocytic lineage, M4 and M5a. Myeloid markers detected in ALL were CD13 2.2% and CD33 2.2%. In this study, immunologically classified ALLs were composed of 65.2% of CALLA (+) B precursor type, 10.9% of CALLA (-) B precursor pattern, 8.7% of T cell type, 2.2% of B cell type, 4.5% of mixed lymphoid lineage(B&T), 2.2% of undifferentiated leukemia, and 6.5% of hybrid leukemia. Twelve cases of acute leukemias ware finally diagnosed to be 5 cases of hybrid leukemia, 3 cases of B lineage, 3 case of T lineage and 1 case of mixed lymphoid(B&T) leukemia. In summary, we think the best method for typing acute leukemias is by using a combination of FAB classification and immunophenotying.

• Parasites, Hosts and Diseases
• /
• v.28 no.2
• /
• pp.85-90
• /
• 1990

This study was aimed to observe the direct and Iymphokine-activated cell mediated cytotoxic effects against Trichomenas waginalis by mouse peritoneal macrophages. Cytotoxicity was measured as release of 3H-thymidine from prelabeled protozoa, and tested in U-bottom microtiter plates. A 0.1 ml suspension of labeled protozoa (2{\times}10^5/ml$) was placed in each well, followed by 0.1 ml of a suspension containing increasing numbers of peritoneal cells. After a 24 hr incubation at $37^{\circ}C$, 0.1ml of the supernatant was collected and counted in liquid scintillation counter. Mouse peritoneal macrophages had appreciable level of spontaneous cytotoxicity against T. maginalis at the effector to target cell ratios from 5 : 1 to 50 : 1, Treatment of macrophages with Iymphokine, produced by PHA-stimulated spleen cells, increased the cytotoxicity in comparison with resident macrophages against T. vaginalis. The degree of macrophage activation for the killing was not dependent upon the Iymphokine concentration. Peritoneal cells adherent to plastic displayed significant levels of cytotoxicity against T. vaginalis. This study indicates that mouse peritoneal macrophages are spontaneously cytotoxic for T. waginalis and Iymphokine increases the cytotoxicity by activating macrophages to kill T. vaginalis.

• Journal of Korean Society on Water Environment
• /
• v.18 no.4
• /
• pp.387-394
• /
• 2002

The efficiency variation of UF(tubular)/RO(spiral wound) process using acrylic wastewater treated by photo-catalyst pretreatment and coagulant-filter-neutralization pretreatment processes were discussed wit the variation of appled pressure and temperature. Ultrafiltration tubular module using acrylic wastewater treated by photo-catalyst pretreatment and coagulant-filter-neutralization pretreatment processes was shown that COD and T-N were not highly affected with the variation of appled pressure and temperature. It was shown that removal efficiency of COD and T-N was low. Removal efficiency of TDS and turbidity with ultrafiltration tubular module was better with the acrylic wastewater by photo-catalyst pretreatment than acrylic wastewater by coagulant-filter-neutralization pretreatment. T-N and TDS were shown high removal efficiency in reverse osmosis membrane process.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.5
• /
• pp.91-102
• /
• 2020

The Internet of Things (IoT) is characterized as the market where various companies compete for the same consumers. Thus, there are differences in functions and performance provided by the main business area and other characteristics of the service providers. This paper investigates whether satisfaction with the service provided depends on the characteristics of the operator by using sentiment analysis of comments. To achieve this goal, word importance analysis and sensitivity analysis are conducted on 34,310 reviews of 41 applications registered in the Google Play. The review analysis was conducted at various levels, including TD-IDF (Term frequency-inverse document frequency) value of keywords, service sectors, the origin of providers, and domestic/foreign providers. The results show that users' overall assessment of IoT services was found to be low, and smart homes received relatively high reviews compared to other services, and manufacturing-based and overseas providers received relatively higher evaluations than others.