EFFECT OF IMPURITIES ON THE MICROSTRUCTURE OF DUPIC FUEL PELLETS USING THE SIMFUEL TECHNIQUE
![]() ![]() |
Park, Geun-Il
(Recycled Fuel Development Division, Korea Atomic Energy Research Institute)
Lee, Jae-Won (Recycled Fuel Development Division, Korea Atomic Energy Research Institute) Lee, Jung-Won (Recycled Fuel Development Division, Korea Atomic Energy Research Institute) Lee, Young-Woo (Recycled Fuel Development Division, Korea Atomic Energy Research Institute) Song, Kee-Chan (Recycled Fuel Development Division, Korea Atomic Energy Research Institute) |
1 |
J.W. Lee, S.H. Kim, S.P. Yim, J.H. Kim and W.K. Kim, J.Y. Min, M.S. Yang, 'Improvement of the Sinterability of Thermally-treated |
2 | E. Walle, P. Perrot and J. Foct, M. Parise, 'Evaluation of the Cs-Mo-I-O and CS-U-I-O Diagrams and Determination of Iodine and Oxygen Partial Pressure in Spent Nuclear Fuel Rods,' J. of Physics and Chemistry of Solid, 66, 655 (2005) DOI ScienceOn |
3 | I.G. Gauld, S.M. Bowman, J.E. Horwedel, and L.C. Leal, 'ORIGEN-ARP: Automatic Rapid Processing for Spent Fuel Depletion, Decay, and Source Term Analysis,' ORNL/NUREG/CSD-2/V1/R7, Oak Ridge National Laboratory (2004) |
4 |
R.J. McEachern and P. Taylor, 'A Review of the Oxidation of Uranium Dioxide at Temperatures below |
5 |
P. G. Lucuta, R. A. Verrall, Hj. Matzke and B. J. Palmer, 'Microstructural Features of SIMFUEL-Simulated High Burn-up |
6 | G. I. Park and K.H. Cho, J.W. Lee, J.J. Park, M.S. Yang, K.C. Song, 'Cesium Release Behavior during the Thermal Treatment of High Burn-up Spent PWR Fuel,' J. Kor. Rad. Waste Soc , 5 , 53 (2007) |
7 | Jae W. Lee, J. W. Lee, W.K. Kim, G.I. Park and K.C. Song, M.S. Yang, 'Improvement of DUPIC Pellet Fabrication Processes by Using Simulated Fuel,' Proc. Conf. 8th Int'l Conference on CANDU Fuel,, Honey Harbour, Canada, Sept. 21-24, 2003 |
8 | Jae W. Lee and J. W. Lee, 'Study on the Characteristics of Milled Powder Prepared by Oxidation and Reduction Process,' J. of Korean Inst. of Resources Recycling, 11, 3 (2002) |
9 | C. Zener, see to C.S. Smith, 'Grain, Phases and Interface : An Interpretation of Microsturcture,' Trans. Am. Inst. Min. Engrs., 175, 15 (1948) |
10 | S. Imoto, 'Chemical State of Fission Products in Irradiated UO2,' J. of Nuclear Materials, 140, 19 (1986) DOI ScienceOn |
11 | Jae W. Lee, J. W. Lee, J.H. Kim and S.P. Yim, M.S. Yang, 'Study on the Characteristics and Sinterability of DUPIC Powder by Using Simulated Fuel,' J. of Nuclear Sci. Technol. Supplement 3, 3, 721(2002) |
12 |
E.H.P Cordfunke and R.J.M. Konnings, 'The Release of Fission Products from Degraded |
13 | G. I. Park and K.H. Cho, J.W. Lee, J.J. Park, M.S. Yang, K.C. Song, 'Release Characteristics of Fission Gases with Spent Fuel Burn-up during the Voloxidation and OREOX Processes,' J. Kor. Rad. Waste Soc , 5 , 39 (2007) |
14 | M.S. Yang, H.B. Choi, C.J. Jeong, K.C. Song, J.W. Lee and G.I Park, H.D. Kim, W.I. Ko, J.J. Park, K.H. Kim, H.H. Lee, J.H. Park, 'The Status and Prospect of DUPIC Fuel Technology,' Nucl. Eng. Technol., 38, 359 (2006) 과학기술학회마을 |
![]() |