• Textile Coloration and Finishing
• /
• v.22 no.2
• /
• pp.83-87
• /
• 2010

Crystal structure of coumarin 6 has been solved by X-ray diffraction. The crystals are triclinic, space group P-1, with a=8.823(2) ${\AA}$, b=8.898(2) ${\AA}$, c=11.025(9) ${\AA}$, ${\alpha}$=86.41(3)$^{\circ}$, ${\beta}$=85.39(3)$^{\circ}$, ${\gamma}$=76.23(3)$^{\circ}$, Mr=350.42, V=837.1(3) ${\AA}^3$, Z=2 and R=0.0516. The molecules are packed parallel to each other by weaker ${\pi}{\cdots}{\pi}$ and C-H${\cdots}{\pi}$ interactions. The detailed geometry of C-H${\cdots}{\pi}$ interactions were discussed. The hydrogen bonds and non-traditional C-H${\cdots}O$ interactions join the no-parallel molecules together. All the molecules packed wall-like with the molecular brick.

• Textile Coloration and Finishing
• /
• v.29 no.1
• /
• pp.25-36
• /
• 2017

This study worked on the synthesis of waterborne polyurethane/epoxy hybrid resins containing aminosilane compound to replace conventional phenol resins used for a coating material for loudspeaker dampers, which are not harmful to human being. Waterborne polyurethane resins were synthesized from two diisocyanate of 4,4'-diphenylethane diisocyanate and toluene diisocyanate, two polyols of polyester polyols(PEP), polycarbonatediol(PCD), including and anionic center of dimethylol butanoic acid, a chain extenders of ethylenediamine(EDA), and a neutral agent of triethylamine. Synthesized polyurethane resins and commercially available bisphenol A type waterborne epoxy resin were blended in weight ratios of 80:20 to prepare polyurethane/epoxy hybrid resins. The synthesized waterborne polyurethane/epoxy hybrid resins were reacted with aminosilane compound to improve mechanical properties. Aminosilane-treated polyurethane /epoxy hybrid resins showed better mechanical properties.

• Textile Coloration and Finishing
• /
• v.29 no.1
• /
• pp.18-24
• /
• 2017

Meta-aramid fabric has been widely used as the reinforcement of composites due to its high flame resistance and tearing strength. Functionality such as abrasion resistance of fabric is very important for specialty fabrics used in car racing suits. In this study, to improve abrasion resistance property of meta-aramid fabric, silicon deposition was conducted by utilizing RF magnetron sputtering. The sputtering process parameters effects were investigated as sputtering power and substrate temperature. The obtained results suggest that the silicon deposition on the meta-aramid fabric has obvious effect upon increasing the abrasion resistance, the thermal insulation and the electric resistance condition for silicon deposition was established. In conclusion, the results of this study have made it possible to manufacture meta-aramids with higher abrasion strength.

• Textile Coloration and Finishing
• /
• v.29 no.4
• /
• pp.223-230
• /
• 2017

Three super hydrophobic fluorescence dyes were selected to dye high molecular weight polyethylene fiber and their molar absorptivity, emission spectrum, and quantum yield were measured. From the results of color strength on the fiber, all the three dyes exhibited linear increase according to the dye concentration and Fluoro3 dye showed the highest color strength among them. Emission strength of the fluorescence dyes on the fiber was investigated according to the dye concentrations. The emission was increased with the increase of the dye concentration at relatively low dye concentration and then after showing the maximum emission strength the emission was decreased at higher dye concentrations. The highest emission was obtained in Fluoro2 dye. Color fastness to washing and rubbing was generally good enough, however, especially to light, only Fluoro3 dye exhibited rating 3 acceptable practically and Fluoro1 and 2 was ratings 1 which is unacceptable level.

• Textile Coloration and Finishing
• /
• v.27 no.2
• /
• pp.142-148
• /
• 2015

The aim of this study was to investigate the possibility utilizing Metasequoia(Metasequoia glyptostroboides) cone as a new natural dye resource. Dyeing onto cotton fiber was carried out to study the effect of dyeing conditions and mordanting effect on dye uptake, color change, and colorfastness. FT-IR analysis supported that hydrolyzable tannins were contained in the extracted colorant. Metasequoia cone colorant showed low affinity to cotton fiber and maximum dye uptake was obtained at pH 3.5 showing YR Munsell color. Mordanting improved dye uptake regardless of mordant type, especially Fe($C_5H_{10}FeO_6$) mordant was effective as much as 2 times higher dye uptake comparing with un-mordanted sample. The color of dyed fabric with mordanting showed YR Munsell color except of the Fe($FeSO_4{\cdot}7H_2O$) mordanted sample showing Y Munsell color. Colorfastness to rubbing and washing was relatively good, whereas lightfastness of the dyed fabrics was above grade 3/4 except that the dyed samples with Fe mordanting showed grade 2. It is necessary to apply Metasequoia cone colorant onto other fibers, especially protein fibers, for evaluating its efficacy as a new natural dye resource.

• Textile Coloration and Finishing
• /
• v.27 no.2
• /
• pp.113-118
• /
• 2015

Poly(vinyl butyral), PVB was photooxidized by UV/ozone irradiation and the effect of UV energy on the surface properties of the UV-irradiated PVB film were investigated by the measurement of reflectance, surface roughness, contact angles, elemental composition, and zeta potential. With increasing UV energy, reflectance decreased in the visible and ultraviolet regions particularly at the wavelength of 400nm. The irradiation produced nano-scale surface roughness including the maximum peak-to-valley roughness increased from 274nm for the unirradiated PVB to 370nm at the UV energy of $5.3J/cm^2$. The improved hydrophilicity was due to the higher $O_{1s}/C_{1s}$ resulting from the introduction of polar groups such as C=O bonds. The surface energy of the PVB film increased from $35.3mJ/m^2$ to $39.3mJ/m^2$ at the irradiation of $15.9J/cm^2$. While the zeta potentials decreased proportionally with increasing UV energy, the cationic dyeability of the PVB increased accordingly resulting from the improved affinity of the irradiated PVB surfaces containing the photochemically introduced anionic and dipolar dyeing sites.

• Textile Coloration and Finishing
• /
• v.28 no.1
• /
• pp.14-22
• /
• 2016

The objective of this study is to develop eco-friendly, functional towel material utilizing cotton-Modal-chitosan blended(C-M-CH) yarn and natural dyeing with mugwort colorants. Dyeing properties of towels with mugwort colorants were studied by investigating the effect of dyeing conditions including concentration of mugwort colorants, dyeing temperature, and dyeing time, and the effects of mordants on dye uptakes were investigated. The C-M-CH towel showed better dye uptake than 100% cotton towel with mugwort colorants. The shade of towels got darker and red-yellowish tint increased by mordanting. Comparing with 100% cotton towel, the colorfastness of dyed C-M-CH towel was satisfactory showing above 3 grade which is the lowest grade to washing fastness. The antibacterial activity against Staphylococcus aureus and deodorization performance of towels were excellent and improved by dyeing with mugwort colorants. From the results obtained, it is concluded that the cotton-Modal-chitosan blended towel dyed with mugwort colorants can be used practically for an eco-friendly and multi-functional towel materials with excellent absorbance and drying properties.

• Textile Coloration and Finishing
• /
• v.28 no.1
• /
• pp.33-39
• /
• 2016

The crystal structure of nylon 56 fibers post extended by drawing process was investigated by synchrotron x-ray scattering measurement. In as-cast fiber, distinct (004) and (020) diffraction peaks were observed and they were related to initial metastable alignment of nylon molecules. With increase in the drawing ratio, (110) peak intensity was increased in vertical direction with decreasing (020) peak. At the same time, (004)' peak evolved position tilted to 29 degrees from the (004) peak. This evolution is directly related to stable crystalline phase of nylon 56 originated from additional formation of hydrogen bondings between N-H and C=O by post drawing process. We also compared density variation, stress-strain curves of the fiber as a function of drawing ratio and strain. The variations of density and tanacity also supported the increase of stable structure of nylon 56.

• Textile Coloration and Finishing
• /
• v.28 no.1
• /
• pp.23-32
• /
• 2016

This study examined the dyeability of fabrics dyed with rosemary, mint, sage, and thyme herb extracts. The herb extracts were pulverized and characterized by UV and FT-IR analysis. Dyeing properties of herb colorants on cotton, silk and wool fiber and effect of dyeing conditions on dye uptake were compared. The constituents of four different herbs were shown to be similar to each other. The dye uptake of rosemary and sage were shown to be larger than those of mint and thyme regardless of the fiber types. Affinity of herb colorants to protain fibers was higher than to cellulose fiber. Compared with silk and wool, the dyeability of cotton was the worse, the dye uptake of silk and wool fibers were increased along with dyeing time and dyeing temperature. As the dye uptake increased with increasing of the dye concentration, and its isothermal adsorption curves were langmuir type, indicating that ionic bonding was involved in the adsorption of herb colorants to the fibers.

• Textile Coloration and Finishing
• /
• v.27 no.2
• /
• pp.126-131
• /
• 2015

Silica-polyurethane hybrid breathable films were prepared and their breathabilities were assessed. Appropriately aggregated silica was prepared through sol-gel reaction of water glass and its particle size ranged 360~500nm. The polyurethane dispersion was prepared by the reaction of isophorone diisocyanate(IPDI) as diisocyanate and polytetramethylene glycol(PTMG) and dimethylol propionic acid(DMPA) as polyol, particle size ranging 30~120nm. The reaction between isocyanate and hydroxyl group to form urethane bonding was checked by the intensity of the stretch peak of isocyanate at $2270cm^{-1}$ in the FT-IR. The silica was incorporated into polyurethane dispersion and casted into film. It was shown that the incorporated silica(1~5wt.%) increased water vapour permeability of the films by 30~100%, and decreased the hydrostatic pressure by 10~40%. From the results, it could be concluded that the appropriate hybridization of silica can increase the breathability of polyurethane dispersion film, while minimizing the loss of hydrostatic pressure.