• Textile Coloration and Finishing
• /
• v.20 no.5
• /
• pp.1-6
• /
• 2008

3-(Hydroxyphenyl phosphinyl) propanoic acid (HPPA) has been one of the most commonly used durable flame retardant agents for polyethylene terephthalate (PET) for many years. We intended to explore the application of HPPA to cellulose fabrics as formaldehyde-free phosphorus based flame retardants (FRs) through green chemistry process. The flame retardancy of the flame-retardant treated cellulose fabrics were characterized by using inductively coupled plasma spectroscopy (ICP) and limiting oxygen index (LOI). Structural changes of the treated cellulose fabrics were carried out by thermogravimetric analysis (TGA) and Fourier transform infrared (FT-IR) spectroscopy. To enhance the flame retardancy of HPPA treated cellulose fibers, glycerol polyglycidyl ether (GPE), a crosslinking agent was employed. Both HPPA and GPE treated cotton fabric imparted an LOI value over 26.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.1
• /
• pp.37-42
• /
• 2004

ECF and TCF bleaching methods are favored in bleaching plants over the world due to the increasing environment constraints. However, interaction of main stages(D and O stage) in ECF bleaching have not been understood completely yet. The degradation of holocellulose as a carbohydrate model compound was investigated by SEC(size exclusive chromatography) to estimate the change of its molecular weight distribution after O and D stage combination treatment. The molecular weight distribution of holocellulose was observed in two divisions(higher and lower molecular portions). It was also shown that DO sequence was more effective than OD, and DOD or ODO was more effective than DO. D stage had a little effect on the degradation of holocellulose, while the degradation of holocellulose increased as the time of the first O stage increased.

• Textile Coloration and Finishing
• /
• v.21 no.2
• /
• pp.14-21
• /
• 2009

In this article, silk fabric was treated with silver nitrate ($AgNO_3$) as oxidizing agent, with conditions such as concentration, and treating time, and subsequently treated with reducing agents such as sodium boron hydride ($NaBH_4$) and sodium sulfide ($Na_2S$) to obtain cathodic coloration. After coloration of silk fabric, dyeing properties (K/S value), colorfastnesses such as wash, rubbing and light, and antibacterial activity property were examined. $AgNO_3$ treating time and reducing time did not influence K/S value, whereas the pH value at alkaline region showed a high K/S value of silk fabric. The cathodic colorations of silk fabric with both of reducing agents at $30^{\circ}C$ have excellent color fastnesses. Also the high antibacterial activities were obtained by the treatment with silver nitrate even at 1% of lower concentration.

• Textile Coloration and Finishing
• /
• v.30 no.3
• /
• pp.159-167
• /
• 2018

Here we designed and synthesized new zinc phthalocyanines and structures were fully confirmed by spectral and elemental analysis. All phthalocyanines have a very good solubility in industrial solvents like chloroform, dichloromethane, dimethyl sulfoxide, N,N-dimethyl formamide, propylene glycol monomethyl ether acetate (PGMEA), acetone, tetrahydrofuran and acetonitrile. UV-Visible absorption and transmittance in PGMEA showed that these dyes have suitable spectral properties for LCD color filters. By Triton X surfactant study, we confirmed that these dyes are not showing any aggregation in PGMEA. We dissolved the all phthalocyanines in LCD fabricating solvent (PGMEA), and all phthalocyanines showed more than 8 wt% of solubility. Finally, all of these results concluded that PCK1, PCK2 and PCK3 are fit for LCD green color filter.

• Textile Coloration and Finishing
• /
• v.22 no.3
• /
• pp.246-256
• /
• 2010

This study studies on the physical property of MWNT/PU composite film for electrostatic dissipation (ESD) function by dispersing multi-wall carbon nanotubes (MWNT) in dimethylformamide (DMF) and by combining it with polyurethane(PU). For this purpose, four kinds of MWNT were selected and the composite films were made by dispersion processing, and their physical properties were measured and investigated in terms of electrical conductivity. For dispersion parameters, four MWNT contents(0.5, 1, 2, 5wt%) and two dispersion times(30min, 120min) were selected. The dispersion property and the electrical conductivity of MWNT/PU film was measured using a UV-Vis spectrometer and conductivity measuring apparatus. Finally, their physical properties according to the dispersion conditions were analyzed and discussed with various processing conditions.

• Textile Coloration and Finishing
• /
• v.22 no.3
• /
• pp.214-219
• /
• 2010

Polyethylene(PE) films were photocrosslinked by continuous UV irradiation. Benzophenone addition as low as 1wt% into the PE film increased the gel fraction up to 96%. The photocrosslinking was attributed to the recombination of PE radicals generated upon UV irradiation, which was enhanced by the hydrogen abstraction of the added benzophenone. Also the crossliked PE showed higher thermal stability and decreased crystallinity with increasing UV energy as shown by TGA, XRD and DSC analysis. It was also possible to fix 5.4% octadecane into PE by the photocrosslinking. The crosslinked PE film containing octadecane showed lower tensile strength and modulus coupled with higher extension compared to that without octadecane, which can be used as a new plasticizing method for the crosslinked PE film.

• Textile Coloration and Finishing
• /
• v.20 no.4
• /
• pp.1-7
• /
• 2008

Methacryloxypropyl trimethoxysilane (MAPTMS), a hybrid organic-inorganic monomer, was photografted onto PET fabric using benzophenone (BP) as a photoinitiator. It was found that a UV energy of 43.2J/$cm^2$ was required to optimally photograft the MAPTMS onto PET fabrics which was applied with an aqueous formulation of 10% MAPTMS, 20% BP and 0.5% N-Methyldiethanol amine (MDEA). The MDEA additive was efficient in reducing atmospheric oxygen inhibition of polymer radicals which eliminated compulsory nitrogen inerting. The surface grafting of PET fabrics was verified by fourier transform infrared spectroscopy (FT-IR) and scanning electron spectroscopy (SEM). The grafted PET fabrics with the hybrid monomer showed higher thermal stability due to the introduced silane component in the monomer as ascertained by higher char content at 800$^{\circ}C$, which increased to 14.5% for the 15.8% grafting compared to 8.2% for the untreated.

• Textile Coloration and Finishing
• /
• v.20 no.4
• /
• pp.53-59
• /
• 2008

For the modification of wool surface, wool fabrics treated with oxygen low-temperature plasma(LTP) and dichloroisocyanuric acid(DCCA) were dyed with milling type acid dye. The difference of dyeing properties on modified and control wool fabric were investigated. DCCA treated wool showed that saturation dye uptake and dyeing desorption ratio were higher than LTP treated wool. Dyeing transition temperatures of DCCA and LTP treated wool fabrics were 20$^{\circ}C$ degree lower than control wool fabric. In light color fastness test, DCCA treated wool fabric was 1 grade lower than LTP or control wool fabric.

• Textile Coloration and Finishing
• /
• v.26 no.3
• /
• pp.272-276
• /
• 2014

The functional materials have been developed as a promising research topic toward the end uses for organic materials and applications. In this study, fluorescein based dye was synthesized by three step reaction. We have designed and synthesized the colorimetric dye through the reactions of fluorescein and methoxy group and ethylene diamine and squaric acid. The structure of the non-fluorescent spirolactam was elucidated by $^1H$-NMR, LC-Mass and FT-IR analyzes. Further studies are in progress to understand the effects of various substituent during the recognition process and to develop fluorescein based sensors for cations or anions.

• Textile Coloration and Finishing
• /
• v.26 no.3
• /
• pp.254-262
• /
• 2014

In this study, the colorants of Wisteria floribunda leaf were extracted with water. Silk and wool fabrics have been dyed with the aqueous extract of Wisteria floribunda leaf and their dyeabilities was studied. Additionally the fastness to washing, drycleaning, light and perspiration were also investigated. Silk and wool fabrics dyed with the extract of Wisteria floribunda leaf were colored in yellowish red tint. The optimum dyeing condition of the colorants extracted from Wisteria floribunda leaf was three repeated dyeing at 70, $95^{\circ}C$ for 1hr using post mordanting. For dyed silk and wool fabrics, the fastness to washing was improved by mordanting, and the fastness to drycleaning was very outstanding.