• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권3호
• /
• pp.252-261
• /
• 2016

A spar-type floating substructure that is being widely used for offshore wind power generation is vulnerable to resonance in the heave direction because of its small water plane area. For this reason, the stable dynamic response of this floating structure should be ensured by accurately identifying the resonance characteristics. The purpose of this study is to analyze the characteristics of the combination resonance between the excitation frequency of a regular wave and natural frequencies of the floating substructure. First, the nonlinear equations of motion with two degrees of freedom are derived by assuming that the floating substructure is a rigid body, where the heaving motion and pitching motions are coupled. Moreover, to identify the characteristics of the combination resonance, the nonlinear term in the nonlinear equations is approximated up to the second order using the Taylor series expansion. Furthermore, the validity of the approximate model is confirmed through a comparison with the results of a numerical analysis which is made by applying the commercial software ANSYS AQWA to the full model. The result indicates that the combination resonance occurs at the frequencies of ${\omega}{\pm}{\omega}_5$ and $2{\omega}_{n5}$ between the excitation frequency (${\omega}$) of a regular wave and the natural frequency of the pitching motion (${\omega}_{n5}$) of the floating substructure.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.365-370
• /
• 2004

Generally, component and FR-4 board are connected by solder joint. Because material properties of components and FR-4 board are different, component and FR-4 board show different coefficients of thermal expansion (CTE) and thus strains in component and board are different when they are heated. That is, the differences in CTE of component and FR-4 board cause the dissimilarity in shear strain and solder joint' failure. The first order Taylor series expansion of the limit state function incorporating with Tresca failure criterion is used in order to estimate the failure probability of solder joints under heated condition. Using shear stresses and shear strains appeared on the solder joint, we estimate the failure probability of solder joints with the Tresca failure criterion. The effects of random variables such as CTE, distance of the solder joint from the neutral point(DNP), temperature variation and height of solder on the failure probability of the solder joint are systematically studied by using the failure probability model with first order reliability method(FORM).

• Ocean Systems Engineering
• /
• 제12권2호
• /
• pp.143-157
• /
• 2022

In this study, the nominal wake field of a semi-displacement type high-speed vessel was computed at full scale by using CFD (Computational Fluid Dynamics) and GEOSIM-based approaches. A scale effect investigation on nominal wake field of benchmark Athena vessel was performed with two models which have different model lengths. The members of the model family have the same Fr number but different Re numbers. The spatial components of nominal wake field have been analyzed by considering the axial, radial and tangential velocities for models at different scales. A linear feature has been found for radial and tangential components while a nonlinear change has been obtained for axial velocity. Taylor wake fraction formulation was also computed by using the axial wake velocities and an extrapolation technique was carried out to get the nonlinear fit of nominal wake fraction. This provides not only to observe the change of nominal wake fraction versus scale ratios but also to estimate accurately the wake fraction at full-scale. Extrapolated full-scale nominal wake fractions by GEOSIM-based approach were compared with the full-scale CFD result, and a very good agreement was achieved. It can be noted that the GEOSIM-based extrapolation method can be applied for estimation of the nominal wake fraction of semi-displacement type high-speed vessels.

• 한국전자파학회논문지
• /
• 제21권11호
• /
• pp.1220-1228
• /
• 2010

본 논문에서는 비선형 RF 전력 증폭기의 효율적인 다항식 기반의 이산 신호 모델링 방법을 제시하였다. 비선형 RF 증폭기의 입, 출력 신호의 샘플링 과정을 통하여 이산 비선형 모델을 추출하는 과정을 기술하고, 테일러 급수와 메모리 다항식 구조를 이용한 다항식 기반의 비선형 이산 모델에서 모델 인자인 샘플률, 비선형 차수, 최대 메모리 깊이의 변화에 따른 모델의 오차를 분석하였다. 다항식 기반의 비선형 모델에서 오차는 샘플률, 비선형 차수, 최대 메모리 깊이에 대하여 특정 값 이후부터 일반적으로 수렴하는 특성을 보인다. 이에 모델 인자값에 따른 시스템의 복잡성을 고려하는 효율적인 이산 신호 모델링 기법을 제시하였다. 모델링 효율 지수를 정의하고, 이를 활용하여 최적의 모델 인자 값을 추출하는 방법을 제시하였다. 제시한 방법을 WiBro, WCDMA 등의 다양한 신호를 가지는 RF 전력 증폭기의 모델링에 적용하고, 제시한 방법의 효율성을 검증하였다. 제안된 기법은 빠른 속도의 모델링과 저렴한 가격의 디지털부를 사용할 수 있게 하여 차후 광대역 송신기에서의 빠른 속도와 낮은 가격의 디지털 전치 왜곡기 구성 등에 활용될 수 있을 것으로 사료된다.

• 대한기계학회논문집A
• /
• 제36권12호
• /
• pp.1543-1549
• /
• 2012

이 논문은 냉간 압연공정의 다단 압연기에서 각 롤 간의 슬립 현상에 대한 상태공간 모델을 도출하고, 이를 이용하여 롤 간 슬립 상태 관측기 설계에 관한 연구를 수행한다. 먼저 뉴튼의 운동법칙을 이용하여 각 롤들의 회전 운동 방정식을 1계 비선형 미분 방정식으로 기술한 후, 테일러 급수를 이용하여 임의의 동작점에서 상태공간 방정식으로 선형화한다. 다음에는 선형화된 상태공간 방정식에 기초하여 Gopinath 구성법으로 측정 가능한 구동 롤을 제외한 종동 롤의 회전 각속도를 추정하는 최소차원 상태 관측기를 설계한다. 마지막으로 컴퓨터 시뮬레이션을 통하여 상태 관측기로부터 추정된 각 롤 회전각속도와 슬립률의 유용성을 고찰한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.215-216
• /
• 2008

This paper is proposed a approximation control method(ACM) for the maximum power of a photovoltaic system. It is designed for power systems application and utilities. The proposed Maximum Power Point Tracking(MPPT) control has the advantage to provide a new simple way to approximate the optimal or rated voltage, the optimal or rated current and maximum power rating produced by a solar panel and the photovoltaic inverter. And this straightforward method has the advantage that Pmax and $V_{op}$ can be approximated using the same variable as the dynamic model without using complicate approximations or Taylor series. This paper is proposed MPPT using AMC using weather condition of domestic moderate program technique. This paper is proposed the experimental results to verify the effectiveness of the new methods.

• Steel and Composite Structures
• /
• 제24권2호
• /
• pp.151-176
• /
• 2017

This paper deals with general equations of motion for free vibration analysis response of thick three-layer doubly curved sandwich panels (DCSP) under simply supported boundary conditions (BCs) using higher order shear deformation theory. In this model, the face sheets are orthotropic laminated composite that follow the first order shear deformation theory (FSDT) based on Rissners-Mindlin (RM) kinematics field. The core is made of orthotropic material and its in-plane transverse displacements are modeled using the third order of the Taylor's series extension. It provides the potentiality for considering both compressible and incompressible cores. To find these equations and boundary conditions, Hamilton's principle is used. Also, the effect of trapezoidal shape factor for cross-section of curved panel element ($1{\pm}z/R$) is considered. The natural frequency parameters of DCSP are obtained using Galerkin Method. Convergence studies are performed with the appropriate formulas in general form for three-layer sandwich plate, cylindrical and spherical shells (both deep and shallow). The influences of core stiffness, ratio of core to face sheets thickness and radii of curvatures are investigated. Finally, for the first time, an optimum range for the core to face sheet stiffness ratio by considering the existence of in-plane stress which significantly affects the natural frequencies of DCSP are presented.

• 대한기계학회논문집B
• /
• 제41권10호
• /
• pp.675-683
• /
• 2017

본 연구에서 원자력 발전용 비상노심냉각 장치인 안전주입탱크의 재충수 단계에 대한 유량에 대한 이론해석을 수행했다. 이론해석을 통해 재충수 단계 유동에 대한 이론 모형을 정립하고 재충수 단계에 대한 비선형 유량방정식을 구하고, 테일러 급수 전개법을 통해 근사유량방정식과 냉각수의 자유표면 높이변화와 유량변화를 예측할 수 있는 이론해들을 구했다. 기존연구에 나와 있는 실험과 비교하여 이론해의 유용성을 검증했다.

• Structural Engineering and Mechanics
• /
• 제46권1호
• /
• pp.19-37
• /
• 2013

The optimum design of base isolation system considering model parameter uncertainty is usually performed by using the unconditional response of structure obtained by the total probability theory, as the performance index. Though, the probabilistic approach is powerful, it cannot be applied when the maximum possible ranges of variations are known and can be only modelled as uncertain but bounded type. In such cases, the interval analysis method is a viable alternative. The present study focuses on the bounded optimization of base isolation system to mitigate the seismic vibration effect of structures characterized by bounded type system parameters. With this intention in view, the conditional stochastic response quantities are obtained in random vibration framework using the state space formulation. Subsequently, with the aid of matrix perturbation theory using first order Taylor series expansion of dynamic response function and its interval extension, the vibration control problem is transformed to appropriate deterministic optimization problems correspond to a lower bound and upper bound optimum solutions. A lead rubber bearing isolating a multi-storeyed building frame is considered for numerical study to elucidate the proposed bounded optimization procedure and the optimum performance of the isolation system.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.316-321
• /
• 2007

This paper is proposed a novel method to approximate the maximum power for a photovoltaic inverter system and tracking method. It is designed for power systems application and utilities. The proposed Maximum Power Point Tracking(MPPT) control has the advantage to provide a new simple way to approximate the optimal or rated voltage, the optimal or rated current and maximum power rating produced by a solar panel and the photovoltaic inverter. And this straightforward method will be named linear reoriented coordinates method(LRCM) with the advantage that Pmax and $V_{op}$ can be approximated using the satre variable as the dynamic model without using complicate approximations or Taylor series. Furthermore tracking method is improved over 50% photovoltaic efficiency. This paper is proposed MPPT using LRMC and tracking method using weather condition of domestic moderate program technique. This paper is proposed the experimental results to verify the effectiveness of the new methods.