• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.9
• /
• pp.143-156
• /
• 2022

This article examines the effect of inward foreign direct investments (FDI) on the export performance of micro, small & medium enterprises (MSMEs) in India, and investigates the spillover impact and absorption capacity of the MSMEs sector. For the first time, the researchers applied the intersectoral linkage approach to investigate the matter and used a panel dataset between 2006 and 2017. The coefficients of forward and backward linkages are estimated by using the Rasmussen method, the study employs a basic linear panel data model, followed by various diagnostic tests to identify the problem of heteroscedasticity, autocorrelation / serial correlation, cross-sectional dependencies, multicollinearity, time-individual specific tests, and unobserved effects. The PCSE model was applied for robust standard error and the Hausman-Taylor IV model to check the robustness of the result generated in the linear panel data model. Despite the high prevalence of forward and backward intersectoral connections and the Lack of absorption capacity of local firms, the results show that FDI has little of an impact on the export performance of micro, small, and medium-sized businesses in India. This study adds to the existing literature on determining local firms' spillover effect and absorption capacity in response to inward FDI.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.3
• /
• pp.289-299
• /
• 2012

The goal of this paper is to apply the multi-step Taylor method to a space truss, a non-linear discrete dynamic system, and analyze the non-linear dynamic response and unstable behavior of the structures. The accurate solution based on an analytical approach is needed to deal with the inverse problem, or the dynamic instability of a space truss, because the governing equation has geometrical non-linearity. Therefore, the governing motion equations of the space truss were formulated by considering non-linearity, where an accurate analytical solution could be obtained using the Taylor method. To verify the accuracy of the applied method, an SDOF model was adopted, and the analysis using the Taylor method was compared with the result of the 4th order Runge-Kutta method. Moreover, the dynamic instability and buckling characteristics of the adopted model under step excitation was investigated. The result of the comparison between the two methods of analysis was well matched, and the investigation shows that the dynamic response and the attractors in the phase space can also delineate dynamic snapping under step excitation, and damping affects the displacement of the truss. The analysis shows that dynamic buckling occurs at approximately 77% and 83% of the static buckling in the undamped and damped systems, respectively.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.282-284
• /
• 2007

The hardening and the constitutive equation based on the crystal plasticity are introduced for the numerical simulation of hemispherical sheet metal forming. For calculating the deformation and the stress of the crystal, Taylor's model of the crystalline aggregate is employed. The hardening is evaluated by using the Taylor factor, the critical resolved shear stress of the slip system, and the sum of the crystallographic shears. During the hemispherical forming process, the texture of the sheet metal is evolved by the plastic deformation of the crystal. By observing the texture evolution of the BCC sheet, the texture evolution of the sheet is traced during the forming process. Deformation texture of the BCC sheet is represented by using the pole figure. The comparison of the strain distribution and punch force in the hemispherical forming process between crystal plasticity and experiment shows the verification of the crystal-based formulation and the accuracy of the hardening and constitutive equation obtained from the crystal plasticity.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.198-203
• /
• 2008

In the present study, the deformation behavior of both of metal and polymer combination on impact was investigated. They have showed a different deformation behavior when the co-axially combined projectile was impacted on rigid target. The theory according to Taylor's simplified approach assumes an ideally rigid-plastic material model exhibiting rate-independent behavior and simple one-dimensional wave propagation concepts that neglect radial inertia. In the case of impact with polymeric materials, elastic strain in general are not negligible compared with plastic strain; and the rigid-plastic material behavior assumed by Taylor for metallic materials cannot be applied any more. Since, the sleeve and the core materials have widely different mechanical properties, they will produce a significant difference of mechanical impedance with each other. Therefore these impedance mismatch influences on the deformation behavior sleeved polymer projectile on impact. As a result, sleeved projectiles will generate a very interesting impact behavior. Therefore, the according to sleeved metal material and core polymer material can see expected. The objective of this study was to investigate the factors which influences on deformation behavior pattern of sleeve materials surface.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.2 s.10
• /
• pp.1-10
• /
• 2006

In this paper, VTS(Vector Taylor Series) algorithm, which was proposed by Moreno at Carnegie Mellon University in 1996, is analyzed and simulated. VTS is considered to be one of the robust speech recognition techniques where model parameter conversion technique is adapted. To evaluation performance of the VTS algorithm, We used CMN(Cepstral Mean Normalization) technique which is one of the well-known noise processing methods. And the recognition rate is evaluated when white gaussian and street noise are employed as background noise. Also, the simulation result is analyzed in order to be compared with the previous one which was performed by Moreno.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.4
• /
• pp.232-237
• /
• 2014

A passive sonar of warship is composed of several directional or omni-directional sensors. In order to model the acoustic signal received into a warship sonar, the wave propagation modeling is usually required from arbitrary noise source to all sensors equipped to the sonar. However, the full calculation for all sensors is time-consuming and the performance of sonar simulator deteriorates. In this study, we suggest an asymptotic method to estimate the sonar signal arrived to sensors adjacent to the reference sensor, where it is assumed that all information of eigenrays is known. This method is developed using Taylor series for the time delay of eigenray and similar to Fraunhofer and Fresnel approximation for sonar aperture. To validate the proposed method, some numerical experiments are performed for the passive sonar. The approximation when the second-order term is kept is vastly superior. In addition, the error criterion for each approximation is provided with a practical example.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.457-465
• /
• 2009

This study presents a moving least squares (MLS) finite difference method for solving elastic crack problems with stress singularity at the crack tip. Near-tip functions are intrinsically employed in the MLS approximation to model near-tip field inducing singularity in stress field. employment of the functions does not lose the merit of the MLS Taylor polynomial approximation which approximates the derivatives of a function without actual differentiating process. In the formulation of crack problem, computational efficiency is considerably improved by taking the strong formulation instead of weak formulation involving time consuming numerical quadrature Difference equations are constructed on the nodes distributed in computational domain. Numerical experiments for crack problems show that the intrinsically enriched MLS finite difference method can sharply capture the singular behavior of near-tip stress and accurately evaluate stress intensity factors.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.4
• /
• pp.97-104
• /
• 2018

In the conventional direction finding, the antenna is installed at a high position on the ground to detect the position of the target with the environment of the LOS(Line of Sight) as much as the signal receiving environment. However, in order to configure such environment, high cost and installation time were required. In this paper, we use TDOA(Time Difference of Arrival) technique to utilize drones in direction finding, so that four drones can be used for directions finding simulation. Simulations based on drone and TDOA direction finding were constructed using additional signal processing Taylor series and Exact Interactive Algorithm. In the simulation, the receiving power is defined by using the 800MHz path-loss model using the GPS information of the ground direction detection, and the position estimation performance is analyzed when the TDOA technique, the Taylor series, and the Exact Interactive Alogrithm are applied.

• Journal of Broadcast Engineering
• /
• v.23 no.2
• /
• pp.302-315
• /
• 2018

Highly non-linear electro-optical transfer function of the Perceptual Quantizer was approximated by a truncated Taylor series, resulting in a closed form solution for luma adjustment. This previous solution is fast and quite suitable for the hardware implementation of luma adjustment, but the approximation error becomes relatively large in the range of 600~3,900 cd/m2 linear light. In order to reduce such approximation error, we propose a new linear model, for which a correction is performed on the position and the slope of line based on the scope of approximation. In order to verify the approximation capability of the proposed linear model, a comparative study on the luma adjustment schemes was conducted using various high dynamic range test video sequences. Via the comparative study, we identified a significant performance enhancement over the previous fast luma adjustment scheme, where a 4.65dB of adjusted luma t-PSNR gain was obtained for a test sequence having a large portion of saturated color pixels.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.233-236
• /
• 1996

This paper describes a liner state-space model for a flexible stick balencer. The method employed to generate the model utilizes a separable formulation of assumed modes to represents the transverse displacement due to bending Lagrangian dynamics are applied to determine the kinetic and potential energies for the system. The resultant dynamic equations are then organized into a state space model and linearized using Taylor series expansion method. A minimum order observer is designed to estimate unmeasurable states.