• 조명전기설비학회논문지
• /
• 제17권5호
• /
• pp.111-117
• /
• 2003

제안한 Taylor모델 개념은 단지 입출력 데이터만을 이용하여 제어기를 설계하기 위해 사용되는데, Taylor모델의 매개변수는 입출력 데이터들을 사용하여 추정되고 제어기는 Taylor모델을 통하여 얻어진다. Taylor모델 근사화의 정확성은 관측창의 크기와Taylor모델의 차수가 커짐에 따라 좋아진다. Taylor모델을 이용한 전력계통의 안정화를 위해 LQR 제어기가 제안되고 컴퓨터 시뮬레이션을 통해 기존의 방법과의 성능을 비교한다.

• 대한기계학회논문집A
• /
• 제34권4호
• /
• pp.457-465
• /
• 2010

본 연구에서는 McVetty 와 Monkman-Grant 의 모델에 기초하여 만들어진 새로운 크리프 수명예측 모델인 Taylor 급수(T-S) 모델을 제안하였다. 본 모델은 회귀분석에서 발생하는 오차를 줄이기 위하여 McVetty 모델에서 sinh 함수를 Taylor 급수에 의해 변환한 후 첫 3 개항을 취한 것으로서 모델중의 상수 값은 통계학적 방법인 최대가능성 기법을 이용하여 결정되었다. T-S 모델을 이용하여 Alloy 617 의 크리프 수명을 예측한 결과 Eno, 지수함수 및 Larson-Miller(L-M) 방법에 비해 더 정확한 예측을 하는 것으로 나타났다. 또한 T-S 모델은 특정 온도에서 크리프 수명 예측을 할 수 있는 등온 T-S(IT-S) 모델로 표현될 수 있었으며, IT-S 모델은 Alloy 617 의 장시간 크리프 수명예측에서 가장 좋은 예측을 하는 것으로 나타났다.

• 대한기계학회논문집B
• /
• 제31권10호
• /
• pp.889-894
• /
• 2007

The effect of the axial slit of outer cylinder on Taylor-Couette flow was experimentally investigated. The radius ratio and aspect ratio of the model was 0.825 and 48, respectively. The depth of slits was 5mm and total 18 slits were azimuthally located along the inner wall of outer cylinder. We used PIV method to measure the flow field and applied refractive index matching method to resolve the image distortion due to the complex model geometry. The results showed the axial slit did not affect the transition from laminar Couette flow to Taylor vortex. The effect of slit wall appeared when the Reynolds number is larger than Re=143 and the slit model shows the transition to turbulent Taylor vortex flow above Re=143.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3183-3186
• /
• 2007

Taylor-Couette flow may appear when the angular velocity is different between two concentric rotating cylinders. This kind of Taylor-vortex flow can be easily seen in lots of engineering problems. In general the geometries of rotating cylinders are generally complex in these cases. In this study, we investigated Taylor-Couette flow when the outer cylinder has the slit along the annulus. The radius ratio and aspect ratio of the experimental model used was 0.825 and 48, respectively. The depth of slits is 5mm and total 18 slits are azimuthally located along the inner wall of outer cylinder. We used PIV method to measure the flow and applied index matching method to resolve the complex geometry effect. The results show the model with slit has no stable wavy vortex region above Re=143.

• 응용통계연구
• /
• 제23권1호
• /
• pp.49-61
• /
• 2010

금융시계열 변동성의 의존성(dependency)은 멱변환된 절대수익률의 자기상관함수를 이용하여 측정할 수 있다. 이때, 절대수익률의 자기상관이 제곱수익률의 자기상관보다 더 강하게 나타나는 성질을 Taylor 성질이라고 한다. 본 논문에서는 여러 가지 국내 금융시계열 자료에 대하여 absolute-value GARCH(1,1)(AVGARCH(1,1)) 모형을 적합하고, Haas (2009)가 제안한 방법을 이용하여 Taylor 성질의 존재여부에 대하여 살펴보았다.

• Journal of Mechanical Science and Technology
• /
• 제15권7호
• /
• pp.847-858
• /
• 2001

This paper considers the control model identification and H(sub)$\infty$ controller design for a tandem cold mill (TCM). In order to improve the performance of the existing automatic gauge control (AGC) system based on the Taylor linearized model of the TCM, a new mathematical model that can complement the Taylor linearized model is constructed by using the N4SID algorithm based on subspace method and the least squares algorithm based on ARX model. It is shown that the identified model had dynamic characteristics of the TCM than the existing Taylor linearized model. The H(sub)$\infty$ controller is designed to have robust stability to the system parameters variation, disturbance attenuation and robust tracking capability to the set-up value of strip thickness. The H(sub)$\infty$ servo problem is formulated and it is solved by using LMI (linear matrix inequality) techniques. Simulation results demonstrate the usefulness and applicability of the proposed H(sub)$\infty$ controller.

• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.884-891
• /
• 2017

The improved transfer functions of the modified Sheppard-Taylor (MS-T) converter, which is capable of regulating output voltage under a wide range of input voltage and load variations, negligible current ripple, and fewer components in comparison to the Sheppard-Taylor (S-T) converter, operating in continuous conduction mode (CCM) are investigated in this study. Its DC equilibrium point, small signal model, and transfer functions are derived and analyzed. Then, the voltage controller is applied for this MS-T converter. The comparisons between the derived model and the existing model are presented. The hardware circuit is designed and the circuit experiments are provided for validation. The results show that the improved transfer functions of the MS-T converter are more effective and general than the previous ones for describing its real characteristics.

• 공업화학
• /
• 제28권4호
• /
• pp.448-453
• /
• 2017

테일러 반응기에서 일어나는 유동의 변화를 전산유체역학을 이용하여 3차원 유동해석을 수행하였다. 테일러 유동은 레이놀즈 수의 증가에 따라 5개의 영역(순환 쿠에트 유동(CCF), 테일러 와류 유동(TVF), 물결 와류 유동(WVF), 변조 물결 와류 유동(MWVF), 난류 테일러 와류 유동(TTVF))으로 나뉘어지며, 각각의 영역에서의 유동 특성을 알아보았다. 각각의 영역에서 와류의 형상, 개수, 길이 등에 차이를 나타나며 바이패스 흐름에도 영향을 줌을 확인하였다. 그 결과 TVF, WVF, MWVF, TTVF 영역에서 테일러 와류가 발생하였다. 테일러 와류의 개수는 TVF 영역에서 가장 많으며 TTVF 영역에서 가장 적게 관찰되었다. 수치해석모델의 검증을 위하여 실험결과와 비교하였고, 실험결과 대비 해석결과가 잘 일치함을 나타내었다.

• 대한수학회지
• /
• 제54권2호
• /
• pp.663-673
• /
• 2017

We consider the multi-harmonic model for the bubble evolution in the Rayleigh-Taylor instability in two and three dimensions. We extend the multi-harmonic model in two dimensions to a high-order and present a new class of steady-state solutions of the bubble motion. The growth rate of the bubble is expressed by a continuous family of two free parameters. The critical point in the family of solutions is identified as a saddle point and is chosen as the physically significant solution. We also present the multi-harmonic model in the cylindrical geometry and find the steady-state solution of the axisymmetric bubble. Validity and limitation of the model are also discussed.

• Journal of Mechanical Science and Technology
• /
• 제17권11호
• /
• pp.1608-1615
• /
• 2003

This paper studies on the linearization of a looper system in hot strip mills, that plays an important role in regulating a strip tension or a strip width. Nonlinear dynamic equations of the looper system are analytically linearized by a static feedback linearization algorithm with a compensator. The proposed linear model of the looper is validated by a comparison with a linear model using Taylor's series. It is shown that the linear model by static feedback well describes nonlinearities of the looper system than one using Taylor's series. Furthermore, it is shown from the design of an ILQ controller that the linear model by static feedback is very useful in designing a linear controller of the looper system.