• Title/Summary/Keyword: Tau plot

Search Result 11, Processing Time 0.021 seconds

Evaluation of three-dimensional cole-cole parameters from spectral IP data

  • Yang Jeong-Seok;Kim Hee Joon
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 2003.11a
    • /
    • pp.383-389
    • /
    • 2003
  • Clay minerals show a distinct induced-polarization phenomenon, which is one of the most important factors for predicting groundwater flow and contaminant transport. This paper presents a step-by-step process to estimate Cole-Cole parameters from spectral induced-polarization (IP) data measured on the surface of three-dimensional earth. First, the inversion of low-frequency resistivity survey data is made to identify the dc resistivity ${\rho}_dc$ of a volume having IP effects. The other parameters, chargeability m, time constant $\tau$, and frequency dependence c, are sought for the polarizable volume. Next, using multi-frequency data, c can be obtained as high or low asymptotes of the slope of log phase vs. log frequency. Further, for low m, intrinsic $\tau$ is approximated by apparent one, ${\tau}_a$, which is derived from the relation ${{\omega}{\tau}}_a$=1 at an angular frequency $\omega$, where the imaginary component of spectral IP data has an extreme value. Finally, to obtain intrinsic m a two-step linearized procedure has been derived. For a body of given $\tau$ and c, forward modeling with a progression of m values yields a plot of observed vs. intrinsic imaginary components for a frequency. Since this plot is essentially linear, to extract the intrinsic imaginary component is quite simple with an observed value. Using the plot of intrinsic imaginary component vs. m, intrinsic m is determined. We present a synthetic example to illustrate that the Cole-Cole parameters can be recovered from spectral IP data.

  • PDF

Application of a New Scaling Parameter to Chain Expansion in the Systems of Polystyrene/Mixed Solvents (폴리스티렌/혼합용매 계에서 사슬의 팽창에 대한 새로운 스케일링 파라미터의 적용)

  • Park, Il-Hyun;Lee, Dong-Il;Hwang, Mi-Ok;Yu, Young-Chol;Park, Ki-Sang
    • Polymer(Korea)
    • /
    • v.31 no.2
    • /
    • pp.98-104
    • /
    • 2007
  • The expansion behavior of polystyrene (PS) chains with various molecular weights has been investigated above Flory $\Theta$temperature by viscometry after dissolving in the three different mixed solvents systems such as benzene/n-heptane, 1,4-dioxane/isopropanol, and 1,4-dioxane/n-heptane. Two different regimes are observed as increasing temperature: one regime is for the expansion of chain and the other is for the contraction. For the higher molecular weight sample of PS, the higher peak temperature showing its maximum expansion is obtained. Within a certain system of Ps/mixed solvents, the $\tau/\tau_c$ parameter shows universality for the variation of molecular weight. But while each system of Ps/mixed solvents has shown its own different slope, the universality breaks down in the overall system of mixed solvents. However after introducing a new empirical $b^{2/3}\tau/\tau_c$ parameter, all data points of three different systems have dropt on one master curve and the universality of chain expansion has recovered again. Here $\tau$ and $\tau_c$ are defined as $(T-\Theta)/\Theta$ and $(\Theta-T_c)/T_c$, respectively and $T_c$ is the critical solution temperature, and b of Schultz-Flory equation is corresponding to the effective slope in the plot of $1/T_c$ against $1/M_w^{1/2}$.

New Methods of Measuring Magnetization and Coercivity by Torque Magnetometer (토크마그네토미터를 이요한 자화 및 보자력측정의 새로운 방법)

  • Heo, Jin;Sin, Seong-Cheol
    • Journal of the Korean Magnetics Society
    • /
    • v.2 no.3
    • /
    • pp.263-267
    • /
    • 1992
  • We have developed new techniques to measure the magnetization and coercivity of a uniaxial magnetic material using a torque magnetometer. The magnetization could be measured from the slope of the linear region in a plot of the torque ${\tau}/H$ versus the applied field H, when the direction of the applied field was normal to the uniaxial orientation. While, the coercivity could be obtained by taking the value of applied field where the torque was zero, when the direction of the applied field was $(180+{\delta})$ degrees from the uniaxial orientation. The techniques were applied to determine the magnetizations and coercivities of several Co /Pd multilayer thin films and the results were confirmed to be similar within a 2 % difference to those obtained by a vibrating sample magnetometer.

  • PDF

Effect of sequence variations within DNA melting region on the rate of formation of open complexes at $\lambdaP_{R}$ promoter ($\lambdaP_{R}$ 프로모터 열린복합체 형성에 미치는 DNA melting 부위 염기서열의 영향)

  • 정현채;노정혜
    • Korean Journal of Microbiology
    • /
    • v.28 no.1
    • /
    • pp.19-26
    • /
    • 1990
  • To examine the effects of sequence variations near the transcriptional start site on the rate of formation of the open complexes at bacteriophage $\lambda P_{R}$ promoter, two mutant promoters were created by site-specific mutagenesis using synthetic oligonucleotides. Mutant I coatains changes at positions -3 and -4 from TT to CC, thus having a 6-bp long G/C stretch between -10 region and transciptional start site (+1). Mutant II has changes at positions -5 and -6 from GG to AA, thereby having a 9-bp long A/T stretch between positions -11 and -3. Selective filter binding assays were performed to measure the rate of formation of the open complexes between the wild-type or two mutant $P_{R}$ promoters on 664 bp fragments and E. coli RNA polymerase at two temperatures. At 37.deg.C, the wild-type and two mutants showed similar rates for the formation of open complex. The second order rate constant $k_{a}$ and $\tau _{int}$, as determined from the .tau.-plot analysis, were $(6.0\pm0.4)\times10^{6}M^{-1}sec^{-1}$ and $11\pm5$sec, respectively. At 18.deg.C, however, the wild-type and two mutant promoters showed differences in the kinetic parameters. k for the wild-type promoter was (2.2$\pm$0.1)\times 10^{6}M^{-1}sec^{-1}$ and $\tau _{int}$ was 76$\pm$sec. Mutant I and II exhibited differences mainly in the rate of isomerization ($\tau_{int,I}=91\pm$10 sec, int,II=34$\pm$ sec), whereas the second order rate constant $k_{a}$ was similar to the wild type value. This result implies that at $18^{\circ}C$, the isomerization rate is determined by both protein conformational change and DNA melting, which are separable kinetically according to the 3-step mechanism of Roe et al.(1984,1985), and that the base changes affected mainly the rate of DNA melting as predicted.lting as predicted.

  • PDF

Analysis of Double Stranded DNA-dependent Activities of Deinococcus radiodurans RecA Protein

  • Kim, Jong-Il
    • Journal of Microbiology
    • /
    • v.44 no.5
    • /
    • pp.508-514
    • /
    • 2006
  • In this study, the double-stranded DNA-dependent activities of Deinococcus radiodurans RecA protein (Dr RecA) were characterized. The interactions of the Dr RecA protein with double-stranded DNA were determined, especially dsDNA-dependent ATP hydrolysis by the Dr RecA protein and the DNA strand exchange reaction, in which multiple branch points exist on a single RecA protein-DNA complex. A nucleotide cofactor (ATP or dATP ) was required for the Dr RecA protein binding to duplex DNA. In the presence of dATP, the nucleation step in the binding process occurred more rapidly than in the presence of ATP. Salts inhibited the binding of the Dr RecA protein to double-stranded DNA. Double-stranded DNA-dependent ATPase activities showed a different sensitivity to anion species. Glutamate had only a minimal effect on the double-stranded DNA-dependent ATPase activities, up to a concentration of 0.7 M. In the competition experiment for Dr RecA protein binding, the Dr RecA protein manifested a higher affinity to double-stranded DNA than was observed for single-stranded DNA.

STUDY ON HURWITZ STABILITY CONDITIONS OF THE CHARACTERISTIC POLYNOMIALS USING THE COEFFICIENT DIAGRAM (계수도를 이용한 특성다항식의 Hurwitz 안정조건에 관한 연구)

  • Kang, Hwan-Il
    • Proceedings of the KIEE Conference
    • /
    • 1998.11b
    • /
    • pp.413-416
    • /
    • 1998
  • We investigate the Hurwitz stability condition using the coefficient diagram. The coefficient diagram consists of a plot of logarithmic values of the coefficients of the characteristic polynomial versus the degree of the coresponding coefficients. The logarithmic value of the coefficient of the characteristic polynomials are plotted in the descending order. Using the Bhattacharyya, Chapellat and Keel's algorithm, the sufficient and necessary condition for Hurwitz stability are reconstructed using the coefficient diagram. With the coefficient diagram we also present some necessary or sufficient conditions for Hurwitz stability of polynomials. In addition we obtain a lower bound for the Manabe parameter $\tau$.

  • PDF

Diffusion Behavior of n-Alkanes by Molecular Dynamics Simulations

  • Goo, Geun-Hoi;Sung, Gi-Hong;Lee, Song-Hi;Chang, Tai-Hyun
    • Bulletin of the Korean Chemical Society
    • /
    • v.23 no.11
    • /
    • pp.1595-1603
    • /
    • 2002
  • In this paper we have presented the results of diffusion behavior of model systems for eight liquid n-alkanes ($C_{12}$-$C_{44}$) in a canonical (NVT) ensemble at several temperatures using molecular dynamics simulations. For these n-alkanes of small chain length n, the chains are clearly <$R_{ee}^2$>/6<$R_g^2$>>1 and non-Gaussian. This result implies that the liquid n-alkanes over the whole temperatures considered are far away from the Rouse regime, though the ratio becomes close to the unity as n increases. Calculated self-diffusion constants $D_{self}$ are comparable with experimental results and the Arrhenius plot of self-diffusion constants versus inverse temperature shows a different temperature dependence of diffusion on the chain length. The global rotational motion of n-alkanes is examined by characterizing the orientation relaxation of the end-to-end vector and it is found that the ratio ${\tau}1/{\tau}2$ is less than 3, the value expected for a isotropically diffusive rotational process. The friction constants ${\xi}$of the whole molecules of n-alkanes are calculated directly from the force auto-correlation (FAC) functions and compared with the monomeric friction constants ${\xi}_D$ extracted from $D_{self}$. Both the friction constants give a correct qualitative trends: decrease with increasing temperature and increase with increasing chain length. The friction constant calculated from the FAC's decreases very slowly with increasing temperature, while the monomeric friction constant varies rapidly with temperature. By considering the orientation relaxation of local vectors and diffusion of each site, it is found that rotational and translational diffusions of the ends are faster than those of the center.

Synthesis, Structure and Magnetic Properties of Mn12 Single Molecule Magnet Containing 4-(Methylthio)benzoate as Peripheral Ligands

  • Lim, Jin-Mook;Do, Young-Kyu;Kim, Jin-Kwon
    • Bulletin of the Korean Chemical Society
    • /
    • v.26 no.7
    • /
    • pp.1065-1070
    • /
    • 2005
  • $[Mn_{12}O_{12}(O_2CPh-4-SMe)_{16}(H_2O)_4]{\cdot}7CH_2Cl_2$ (1), a new single-molecule magnet complex has been successfully synthesized by substitution of acetate ligand of Mn12ac with 4-(methylthio)benzoic acid. Complex 1 crystallizes into triclinic P$\overline{1}$ with a = 18.321(3) $\AA$, b = 19.011(3) $\AA$, c = 27.230(4) $\AA$, $\alpha$ = 86.973(3)$^{\circ}$, $\beta$ = 76.919(3)$^{\circ}$, $\gamma$ = 87.613(3)$^{\circ}$, and Z = 2. In complex 1, one Mn(III) ion has an abnormal Jahn-Teller elongation axis oriented at an oxide ion. Complex 1 has two out-of-phase ac susceptibility peaks in the 2-4 K and 4-7 K regions. Effective anisotropy energy barrier and pre-exponential factor are $U_{eff}$ = 45.95 K, 1/$\tau$0 = 8.6 ${\times}\;10^9s^{-1}\;for\;{\chi}_M$'' peaks in the lower temperature region and $U_{eff}$ = 59.45 K, 1/$\tau_0$ = 2.2 ${\times}\;10^8\;s^{-1}$ for $\chi_M$'' peaks in the higher temperature region. The parameters of S = 10, g = 1.87, D = -0.40 $cm^{-1}$, and E = 0.00034 $cm^{-1}$ were obtained from the M/N${\mu}_B$ vs. H/T plot of complex 1.

Characteristics of impedance spectroscopy depending on thickness of emissive layer in Organic Light-Emitting Diodes (유기발광소자의 발광층 두께변화에 따른 임피던스 특성 분석)

  • Ahn, Joon-Ho;Lee, Joon-Ung;Chung, Dong-Hoe;Lee, Sung-Ill;Song, Min-Jong;Kim, Tae-Wan
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2005.05a
    • /
    • pp.193-196
    • /
    • 2005
  • 유기발광소자의 발광층의 두께에 따른 임피던스의 변화를 살펴보았다. 임피던스는 두께에 따라 저항의 변화에 따른 의존성을 보이며, 그에 따른 임피던스와 Cole-Cole 반원의 변화, 두께에 따른 $1/\tau$ 의 변화를 살펴보았다. 발광층의 두께는 각각 100, 200, 300 nm의 두께로 열증착하여 실험하였고, 소자의 구조는 $ITO/Alq_3/Al$의 구조로 측정 하였다. 유기발광소자의 발광층인 $Alq_3$의 두께가 증가함에 따라 임피던스의 크기가 증가하고, 위상각의 크기는 100nm의 경우 0V에서 용량성을 보이다가 6~10V까지 부성저항특성을 나타낸 후 약 22V에서 저항성을 나타내고, 200과 300 nm의 경우 12V까지 용량성을 나타내다 이후 22V 근방에서 $0^{\circ}$에 가까워지며 저항성을 나타내는 것을 알 수 있었다. 또한 두께에 따른 Cole-Cole 반원을 살펴보면 두께가 증가할수록 반원의 크기가 증가하는 것을 알 수 있으며, 이를 통해 간단한 등가회로를 예측할 수 있었다. 그리고 벌크내의 용량성$(C_p)$을 측정하여 두께의 증가에 따라 $C_p$ 값이 감소하는 것을 알 수 있었다.

  • PDF

The physical properties and the dyeability of the easily dyeable polyester yarn under atmospheric pressure (상압가염형 폴리에스테르 섬유의 물성과 염색성)

  • Kim, Tae Gyeong;Yun, Seok Han;Sin, Sang Yeop;Im, Yong Jin;Jo, Gyu Min
    • Textile Coloration and Finishing
    • /
    • v.13 no.6
    • /
    • pp.33-33
    • /
    • 2001
  • The physical properties and the dyeability of the easily dyeable polyester yarn(EDY) were investigated and compared with those of regular polyester (REG-PET). The EDY, copolymerized with small amount of polyethylene glycol(PEG), showed higher intensity of aliphatic CH peak in IR spectrum, lower density and lower compactness than those of the REG-PET from the analysis of IR, density gradient column and XRD respectively. In the physical properties, the EDY has lowers $T_g,\;T_m$, specific stress and initial modulus, and also has higher strain than that of the REG-PET. The EDY can be dyed under atmospheric pressure and its dyeing rate was faster than REG-PET due to low $T_d$, and this seems to be caused by the increased flexibility of Polymer chain in amorphous region of the EDY due to the copolymerization of PEG.ns being within the experimental error, the average values of lifetim. $\tau$(t) are taken for further calculations. Rate constants such as Stern-Volmer quenching constants K$_{sv}$, quenching rate parameters k$_q$ and k''$_q$, static quenching constant V and kinetic distance r are determined using the modified Stern-Volmer eq.tion and sphere of action static quenching model. In order to see whether the reactions are diffusion limited, equations k$_q$ = e$^{-Eq/RT}$ and k''$_q$ = e$^{-Eq/RT}$ are used to determine the values of E$_q$ and E''$_q$, the activati. energies for collisional quenching and the values of E$_q$ are 14.53, 17.28 and 16.20 kJ mole$^{-1}$ for MPNO1, MPNO2 and 2-PI respectively and the values of E''$_q$ are 14.62 and 17.73 for MPNO1 and MPNO2 respectively. From the magnitudes of various quantities it has.een concluded that the reactions are diffusion limited and the observed positive deviations in the S-V plot are due to static and dynamic quenching.