• 한국동물위생학회지
• /
• 제33권3호
• /
• pp.249-254
• /
• 2010

Deer can be one of the susceptible animals to bovine infectious diseases, and thus, may play a role either as a reservoir or amplifier host for spreading the diseases to other species such as cattle and goat. This study was conducted to determine the serum antibodies to bacterial infectious diseases for brucellosis, tuberculosis (TB), paratuberculosis (Johne's disease) in deer. Serum samples were randomly collected from 78 deer from 31 farms at Jeonbuk province, and 7 wild water deer from Jeonbuk wild animal treatment center during 2005 to 2007, respectively. Four farm deer (5.1%) showed antibodies to tuberculosis using Antigen Rapid Bovine TB Ab Test Kit. One elk (1.3%) and one wild water deer had antibodies for paratuberculosis. Antibody against Brucellosis was not detected in tube agglutination test (TAT) and enzyme-linked immunosorbent assay (ELISA). These data suggest that caution should be applied to inspection of velvet, deer blood and meat for human consumption from deer because of zoonotic bacterial diseases in deer. In addition, farmed deer can be a transmissible host for zoonotic disease to diary or raising farm.

• 수산해양기술연구
• /
• 제24권4호
• /
• pp.144-149
• /
• 1988

광에 대한 어류의 행동을 조사하기 위하여 까치복 Fugu xanthopterus에 광의 세기가 서로 다른 8가지 백색인공광원으로 광자극을 주어, 그에 대한 반응을 주간과 야간으로 구분 조사한 결과는 다음과 같다. 1. 광자극에 대한 수조내의 구간별분포는 광원쪽구간에 많이 모여 분포곡선은 대체로 L자형이 되었으나, 광의 세기에 따라 그 형태가 다소 차이가 있었으며 주야간의 차이는 뚜렷하지 않았다. 2. 수중조도가 높아짐에 따라 광원쪽에서 더 많이 모이는 경향을 나타냈으며 주간보다 야간에 다소 많이 모였다. 3. 집어율이 최대가 되는 수중조도(적정조도)는 298.56 lux(188.44~444.96 lux)로써 주야간에 같았으며, 최대집어율은 주간에 47.30%, 야간에 50.43%로써 야간에 더 높았다. 4. 조명시간이 경과함에 따라 집어율은 증가하거나 증가한 후 감소하는 경향을 보였으나, 계속 불안정하게 변동했으며 주야간의 차이는 뚜렷하지 않았다.

• 대한가정학회지
• /
• 제39권8호
• /
• pp.137-154
• /
• 2001

This study was made to draft the tight fitting bodice pattern which horizontal and perpendicular stands are to be lightly set, with the consideration of characteristics of body shape in design of clothes. Measurement of body was conducted on 53 women in twenties, and observation was made on surface development pattern by adhesive tape addition method and gypsum method on three standard objects. In the study, bodice pattern was completed by using already made Somato- measurer, compared with existing bodice pattern, and the results are as follows. The result of the correlation analysis by body measurement shows that chest circumference has a relation to B$.$P-front neck point, side neck point, shoulder point, front interscye breadth point, and the item in spine scapulae point has relation to the item of back neck line, and front & back horizontal values. The degree of shoulder slant, width of armhole and of its depth, the amount of breast, back space, back length were shown to be directly measured from the body. In surface development pattern, tight-fit bodice pattern necessary to the breast volume and back space were shown to be investigated and these volume have to be given in setting up basic line for clothes design together with body measurement value. The result of sensory evaluation for appearance test on fitness shows higher value of research bodice including line of shoulder line, front and back interscye breadth, chest circumference, waist circumference, armhole circumference and of its depth, compared with the research bodice in most items. The result of this study is seen showing high effectiveness for the basic data to design the ready-made dress of high sensitivity of high value added tat.

• 한국재료학회지
• /
• 제27권1호
• /
• pp.48-52
• /
• 2017

In this study, we used I-V spectroscopy, photoconductivity (PC) yield and internal photoemission (IPE) yield using IPE spectroscopy to characterize the Schottky barrier heights (SBH) at insulator-semiconductor interfaces of Pt/$HfO_2$/p-type Si metal-insulator-semiconductor (MIS) capacitors. The leakage current characteristics of the MIS capacitor were analyzed according to the J-V and C-V curves. The leakage current behavior of the capacitors, which depends on the applied electric field, can be described using the Poole-Frenkel (P-F) emission, trap assisted tunneling (TAT), and direct tunneling (DT) models. The leakage current transport mechanism is controlled by the trap level energy depth of $HfO_2$. In order to further study the SBH and the electronic tunneling mechanism, the internal photoemission (IPE) yield was measured and analyzed. We obtained the SBH values of the Pt/$HfO_2$/p-type Si for use in Fowler plots in the square and cubic root IPE yield spectra curves. At the Pt/$HfO_2$/p-type Si interface, the SBH difference, which depends on the electrical potential, is related to (1) the work function (WF) difference and between the Pt and p-type Si and (2) the sub-gap defect state features (density and energy) in the given dielectric.

• Journal of Microbiology and Biotechnology
• /
• 제26권11호
• /
• pp.1993-2005
• /
• 2016

Bacillus pumilus is one of the most characterized microorganisms that are used for high-level production of select industrial enzymes. A novel B. pumilus SCU11 strain possessing high alkaline protease activity was obtained in our previous work. The culture supernatant of this strain showed efficient dehairing capability with minimal collagen damage, indicating promising potential applications in the leather industry. In this study, the strain's extracellular proteome was identified by LC-MS/MS-based shotgun proteomic analysis, and their related secretory pathways were characterized by BLAST searches. A total of 513 proteins, including 100 actual secreted and 413 intracellular proteins, were detected in the extracellular proteome. The functions of these secreted proteins were elucidated and four complete secretory systems (Sec, Tat, Com, and ABC transporter) were proposed for B. pumilus. These data provide B. pumilus a comprehensive extracellular proteome profile, which is a valuable theoretical and applicative basis for future genetic modifications and development of industrial enzymes.

• 전자공학회논문지S
• /
• 제36S권9호
• /
• pp.36-48
• /
• 1999

최근 ITU-T에서는 고속 데이터 응용을 위해 새로운 ATC (ATM Transfer Capability)로 크래딧 기반의 흐름 제어를 사용하는 CT (Controlled Transfer) 서비스가 고려되고 있다. 본 논문에서는 크래딧 기반 흐름 제어에서 단점으로 지적되는 버퍼 요구량을 줄이기 위해 적용되고 있는 동적 버퍼 할당 방식들의 성능을 분석하고, 새로운 동적 버퍼 할당 방식을 제안하였다. 그리고, 시뮬레이션을 통하여 기존의 대표적인 동적 버퍼 할당 방식인 FCVC (Flow Controlled Virtual Channels)의 동적 할당 방식과 ZQFC (Zero Queueing Flow Control) 방식 및 제안된 방식의 성능을 비교 분석하였다. 시뮬레이션 결과 제안된 동적 버퍼 할당 방식은 망의 부하 정도에 따라 할당 버퍼량의 증감량을 조절하여 빠르게 망 상황의 변화에 대처하여 VC들 사이의 대역폭 사용의 공평성, 스위치의 큐 길이 및 링크 이용 효율면에서 우수한 성능을 보임을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3676-3680
• /
• 2012

An Epstein-Barr virus (EBV)-based plasmid contains the EBV nuclear antigen 1 (EBNA1) gene and EBV replication origin (oriP) sequence. Since EBNA1 (the only EBV-encoded protein) is combined with oriP, it is replicated simultaneously with chromosomal DNA in human, primate, and canine cells and is faithfully segregated at a stable copy number upon cell division. Consequently, it can be used to stably express gene inserts over a prolonged time in target cells. We have previously shown that the polyamidoamine (PAMAM) dendrimer can be surface-modified with L-arginine. Arginine is present at a high frequency in the transactivator of transcription (Tat) sequences of human immunodeficiency virus (HIV). It presents high membrane permeability and permits effective transfer of DNA inside the cells. In this study, we constructed two kinds of recombinant DNA by inserting the luciferase gene and enhanced green fluorescence protein (eGFP) gene as reporter genes into the pCEP4 plasmid vector. We measured dynamic light scattering (DLS) and zeta potential after preparing PAMAM-based cationic polymer/EBV-based plasmid complexes. We performed transfection of HEK 293 cell lines with the polyplexes, and monitored luciferase activity and green fluorescence protein (GFP) expression. Our results show that PAMAM-based cationic polymer/EBV plasmid complexes provide enhanced and sustained gene expression.

• Structural Engineering and Mechanics
• /
• 제75권6호
• /
• pp.643-657
• /
• 2020

This study presents experimental and numerical investigations on circular steel tube confined ultra high performance concrete (UHPC) columns under axial compression. The plain UHPC without fibers was designed to achieve a compressive strength ranged between 150 MPa and 200 MPa. Test results revealed that loading on only the UHPC core can generate a significant confinement effect for the UHPC core, thus leading to an increase in both strength and ductility of columns, and restricting the inherent brittleness of unconfined UHPC. All tested columns failed by shear plane failure of the UHPC core, this causes a softening stage in the axial load versus axial strain curves. In addition, an increase in the steel tube thickness or the confinement index was found to increase the strength and ductility enhancement and to reduce the magnitude of the loss of load capacity. Besides, steel tube with higher yield strength can improve the post-peak behavior. Based on the test results, the load contribution of the steel tube and the concrete core to the total load was examined. It was found that no significant confinement effect can be developed before the peak load, while the ductility of post-peak stage is mainly affected by the degree of the confinement effect. A finite element model (FEM) was also constructed in ABAQUS software to validate the test results. The effect of bond strength between the steel tube and the UHPC core was also investigated through the change of friction coefficient in FEM. Furthermore, the mechanism of circular steel tube confined UHPC columns was examined using the established FEM. Based on the results of FEM, the confining pressures along the height of each modeled column were shown. Furthermore, the interaction between the steel tube and the UHPC core was displayed through the slip length and shear stresses between two surfaces of two materials.

• Journal of Biosystems Engineering
• /
• 제41권4호
• /
• pp.365-372
• /
• 2016

Purpose: Tea is the most frequently consumed drink worldwide, next to water. About 75% of the total world tea production includes black tea, and withering is one of the major processing steps critical for the quality of black tea. There are two types of tea withering methods: physical and chemical withering. Withering can be achieved by using tat, tunnel, drum, and trough withering systems. Of these, the trough withering system is the most commonly used. This study focuses on the different types of withering, their effect on the various quality attributes of tea, and other aspects of withering methods that affect superior quality tea. Results: During physical withering, tea shoots loose moisture content that drops from approximately 70-80% to 60-70% (wet basis). This leads to increased sap concentration in tea leaf cells, and turgid leaves become flaccid. It also prevents tea shoots from damage during maceration or rolling. During chemical withering, complex chemical compounds break down into simpler ones volatile flavor compounds, amino acids, and simple sugars are formed. Withering increases enzymatic activities as well as the concentration of caffeine. Research indicates that about 15% of chlorophyll degradation occurs during withering. It is also reported that during withering lipids break down into simpler compounds and catechin levels decrease. Improper withering can cause adverse effects on subsequent manufacturing operations, such as maceration, rolling, fermentation, drying, and tea storage. Conclusion: Freshly harvested leaves are conditioned physically and chemically for subsequent processing. There is no specified withering duration, but 14-18 h is generally considered the optimum period. Proper and even withering of tea shoots greatly depends on the standards of plucking, handling, transportation, environmental conditions, time, and temperature. Thus, to ensure consumption of high quality tea, the withering step must be monitored carefully.

• 한국통신학회논문지
• /
• 제25권10A호
• /
• pp.1566-1575
• /
• 2000

이 논문은 일반화된 감마 신호원에 최소 평균제곱오차 왜곡을 갖도록 설계된 양자기가 다른 신호원에 사용될때 발생하는 양자기 불일치에 대한 연구로서, 양자기의 여러 불일치 가운데, 설계 신호원과 사용 신호원의 분산이 불일치된, 분산 불일치 문제를 다루었다. 주 내용은 베넷 적분식을 기반으로 하여 유도한 양자기 왜곡의 두 근사수식으로, 첫째 근사식은 양자기의 맨 바깥 경계값의 함수로 표시된 제1차 왜곡 근사식이며, 둘째 근사식은 이 맨바깥 경계값의 근사식을 사용한 제2차 왜곡 근사식이다. 일반화된 감마 신호원의 일종인 라플라스 신호원의 경우에 다양한 분산 불일치에 대해, 양자기의 실제 왜곡을 수치로 구하였으며, 이 실제 왜곡과 두 근사식을 비교하였다. 제1차 및 2차 근사식은 모두, 설계 신호원의 분산에 대한 사용 신호원의 분산 비율이 클수록, 더 작은 양자점수에서도 실제 왜곡에 근접하였으며, 또 양자점의 개수가 64 이상일 때 실제 왜곡의 2~4% 이내의 오차를 보여, 높은 정확도를 갖는 것이 관찰되었다. 이를 종합할 때, 이 논문에서 제시하는 근사식들은, 수식이라는 측면과 정확도라는 측면에서, 가치있는 것으로 평가된다.