• The Korean Journal of Nuclear Medicine
• /
• v.36 no.3
• /
• pp.155-165
• /
• 2002

Purpose: The aim of this study was to identify the brain areas whose regional cerebral blood flow (rCBF) was changed in medial temporal lobe epilepsy (mTLE) using ${H_2}^{15}O-PET$. Materials and Methods: 12 patients with mTLE (6 left, 6 right mTLE) and 6 normal controls were scanned during a fixation baseline period and a sensory-motor condition where subjects pressed a button to an upward arrow. A voxel-based analysis using SPM99 software was peformed to compare the patient groups with the normal controls for the rCBF during fixation baseline period and for relative changes of rCBF during the sensory-motor task relative to fixation. Results: During the fixation baseline, a significant reduction of rCBF was found posterior insula bilaterally and right frontopolar regions in right mTLE patients compared to the normal controls. In left mTLE patients, the reduction was found in left frontopolar and temporal legions. During the sensory-motor task, rCBF increase over the fixation period, was reduced in left frontal and superior temporal legions in the right mTLE patients whereas in various areas of right hemisphere in left mTLE patients, relative to normal controls. However, the increased rCBF was also found in the left inferior parietal and anterior thalamic/fornix regions in both right and left mTLE patients compared to normal controls. Conclusion: Epilepsy induced changes were found not only in relative increase/decrease of rCBF during a simple sensory-motor control condition relative to a fixation rest condition but also in the relative rCBF distribution during the rest period.

• Journal of dental hygiene science
• /
• v.16 no.6
• /
• pp.495-501
• /
• 2016

The purpose of this study was to assess dental hygienists' awareness of medical technician jurisprudence. The study was conducted over a 2-month period from March 1 to May 1, 2016. A self-reported questionnaire was completed by 201 dental hygienists in Seoul, Gyeonggi, and Incheon province. The questionnaire consisted of items on the awareness of the jurisprudence pertaining to medical technician jurisprudence. Data were analyzed using the IBM SPSS Statistics ver. 19.0 program. We found that 32.8% of the respondents were aware of medical technician jurisprudence. Low awareness that result was due to "insufficient public relations efforts." The respondents thought that medical technician jurisprudence are inefficient in clinical settings. Of the dental hygienists, 75.9% replied that task distribution was unclear and 40.0% lacked awareness of the distribution of dentists' duties (40.0%). A total of 59.8% of respondents showed intention to participate in medical jurisprudence seminars. Of the dental hygienists, 77.0% agreed with the insert dental hygienists under medical jurisprudence category. In conclusion, dental hygienists' awareness of medical technician jurisprudence should be improved. In addition, the dental hygienist jurisprudence need to be revised regarding job status.

• The Korean Journal of Pesticide Science
• /
• v.4 no.2
• /
• pp.1-10
• /
• 2000

Fungicide resistance study in Korea is still in its infancy, and most of those resistance studies are largely limited to newness of the detected resistant strains. In future, detection of fungicide-resistant strains has to be based on sensitivity distribution of pathogen populations to certain fungicides, and standard levels of certain fungicides for resistance should be determined under the basis of this data. Most of the early research on fungicide resistance in Korea has overlooked this point, and resulted in inconsistency and confusion for monitoring sensitivity shift of pathogen population among individual researchers. Fungicide resistance detected in vitro tests has to be documented in field trials by examining control efficacy against resistant and wild-type pathogen populations. Resistance detection in wife has to be correlated with lower activity in practice. Using this process, fungicide resistance will have a practical meaning. Fitness evaluation of resistant strains for survival is, in particular, of importance to determine the future stability of the resistance in the pathogen population. In fields, sensitivity change of pathogen populations should be carefully monitored with and without fungicide selection pressures to establish long-term management strategies against fungicide resistance. It is becoming an urgent task to provide information through research for designing and implementing successful counter-measures against fungicide resistance problems in Korea.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.5
• /
• pp.93-104
• /
• 2018

Purpose - This study is to investigate the relationship among emotional intelligence, self-efficacy and job stress of foreign life insurance consultants focusing on the mediating effect of self-efficacy. Regarding job security, in general foreign life insurance companies in Korea have more severe working conditions in terms of required contract performance. For foreign life insurance consultants, they are assumed to need higher level of emotional intelligence and self efficacy to meet the conditions. In this study, focus is cast on these aspects. Research design, data, and methodology - Basically the research is conducted upon questionnaires responded by foreign life insurance consultants. That is, data are collected from 255 sample of insurance consultants who work for a foreign owned life insurance company. The Questionnaire measure the level of emotional intelligence, self-efficacy and job stress of insurance consultants. The data are analyzed using pearson's correlation coefficient and hierarchical multiple regression, descriptive statistics, t-test, ANOVA, Durbin-Watson test. Results - The general characteristics of respondents are gender, age, marital status, education level, income monthly, career length, change jobs no, working day per week, call no. per week, meeting no. with client per week, contract regularity, contract no. per month and cancellation contract per year. The mean of emotional intelligence is 2.63, self-efficacy is 3.44 and job stress is 2.20. Emotional intelligence is composed with mean value of self emotion appraisal(3.93), other's emotion appraisal(3.78), regulation of emotion(3.29) and use of emotion(3.52). The mean of self efficacy is composed with mean value of self-confidence(3.41), self-regulated efficacy(3.59) and preference task difficulty(3.30). The job stress is composed with mean value of job requirement(2.61), lack of job autonomy(1.99), conflict of personal relations(1.99), job instability(2.38), organizational system(2.19) and inappropriate compensation(2.07). There is a significant positive correlation between emotional intelligence and self-efficacy. The emotional intelligence and self-efficacy are significantly negative correlation with job stress. The self-efficacy is showed a mediating variable between emotional intelligence and job stress. Conclusions - To decrease job stress level, foreign life insurance company should find the factors to improve the emotional intelligence and self-efficacy of life insurance consultants, and develop appropriate plans using a mediating role of self- efficacy between emotional intelligence and job stress.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.694-698
• /
• 2008

In hydrology, it is a difficult task to deal with multivariate time series such as modeling streamflows of an entire complex river system. Normal distribution based model such as MARMA (Multivariate Autorgressive Moving average) has been a major approach for modeling the multivariate time series. There are some limitations for the normal based models. One of them might be the unfavorable data-transformation forcing that the data follow the normal distribution. Furthermore, the high dimension multivariate model requires the very large parameter matrix. As an alternative, one might be decomposing the multivariate data into independent components and modeling it individually. In 1985, Lins used Principal Component Analysis (PCA). The five scores, the decomposed data from the original data, were taken and were formulated individually. The one of the five scores were modeled with AR-2 while the others are modeled with AR-1 model. From the time series analysis using the scores of the five components, he noted "principal component time series might provide a relatively simple and meaningful alternative to conventional large MARMA models". This study is inspired from the researcher's quote to develop a multivariate simulation model. The multivariate simulation model is suggested here using Principal Component Analysis (PCA) and Independent Component Analysis (ICA). Three modeling step is applied for simulation. (1) PCA is used to decompose the correlated multivariate data into the uncorrelated data while ICA decomposes the data into independent components. Here, the autocorrelation structure of the decomposed data is still dominant, which is inherited from the data of the original domain. (2) Each component is resampled by block bootstrapping or K-nearest neighbor. (3) The resampled components bring back to original domain. From using the suggested approach one might expect that a) the simulated data are different with the historical data, b) no data transformation is required (in case of ICA), c) a complex system can be decomposed into independent component and modeled individually. The model with PCA and ICA are compared with the various statistics such as the basic statistics (mean, standard deviation, skewness, autocorrelation), and reservoir-related statistics, kernel density estimate.

• Progress in Medical Physics
• /
• v.29 no.3
• /
• pp.92-100
• /
• 2018

The manufacturer of a linear accelerator (LINAC) has reported that the target melting phenomenon could be caused by a non-recommended output setting and the excessive use of monitor unit (MU) with intensity-modulated radiation therapy (IMRT). Due to these reasons, we observed an unexpected beam interruption during the treatment of a patient in our institution. The target status was inspected and a replacement of the target was determined. After the target replacement, the beam profile was adjusted to the machine commissioning beam data, and the absolute doses-to-water for 6 MV and 10 MV photon beams were calibrated according to American Association of Physicists in Medicine (AAPM) Task Group (TG)-51 protocol. To verify the beam data after target replacement, the beam flatness, symmetry, output factor, and percent depth dose (PDD) were measured and compared with the commissioning data. The difference between the referenced and measured data for flatness and symmetry exhibited a coincidence within 0.3% for both 6 MV and 10 MV, and the difference of the PDD at 10 cm depth ($PDD_{10}$) was also within 0.3% for both photon energies. Also, patient-specific quality assurances (QAs) were performed with gamma analysis using a 2-D diode and ion chamber array detector for eight patients. The average gamma passing rates for all patients for the relative dose distribution was $99.1%{\pm}1.0%$, and those for absolute dose distribution was $97.2%{\pm}2.7%$, which means the gamma analysis results were all clinically acceptable. In this study, we recommend that the beam characteristics, such as beam profile, depth dose, and output factors, should be examined. Further, patient-specific QAs should be performed to verify the changes in the overall beam delivery system when a target replacement is inevitable; although it is more important to check the beam output in a daily routine.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.6
• /
• pp.641-652
• /
• 2001

Most of current internet auction systems are single auction server program that partly automates the function of the conventional auction house. So these systems do not provide sufficient independence, distribution and parallelism between the functions of the conventional auction house. In these suction systems, only some of suction management facilities are automated by the server program, but still users need to execute a repetitive task to monitor the dynamic progress of a certain auction, decide the proper bid price, and submit the bid. Another problem is that they support only the single auctions such as English suction and Dutch auction, but they do not support the double auctions that are superior to the single auction in terms of speed, efficiency, and the fair distribution of profit. In this paper, we present are design and implement of an agent-based continuous double auction system, called CoDABot, in order to overcome the limitations of current auction systems. CoDABot supports the continuous double auction, provides various bidding agents for users to select, and has been implemented with a multi-agent system to realize more independent, and parallel subsystems.

• Journal of Plant Biology
• /
• v.2 no.1
• /
• pp.14-21
• /
• 1959

The bamboo, one of staples of South-East Asia, has 1, 250 species in 46 Genus throughout the world South-East Asia, it's main habitat, has 1, 180 species, while South America has about 70 species or so. Major places of it's production in Asia are Korea, southern China, Japan, Malay, Ceylon, Formosa, and Philipine, but of these, Korea, southern China, and Japan are the most famous places for their production of excellant bamboo. In Korea, Kyongsang-Namdo and Cholla-Namdo are known as it's home, occupying 80 per cent of the total area of bamboo production in this country. Kyongsang-Pukdo, Cholla-Pukdo, Chungehong-Namdo, and Kangwon-do are also known as it's minor production. The importance of the bamboo can not be ignored, considering it's role in the industrial development of this country; the bamboo-ware is indispensable for the culture of laver which annually secures a considerable amount of foreign money. But it has long been regreted that the home-made bamboo-ware is far from being able to meet the ever increasing demand in quantity and is forced to be imported annually. In the light of the above mentioned fact, much interested; I undertook the task of investigating the bamboo in this country, Primarily concerned in it's kind and distribution, and could draw the following conclusions as the first phase of my investigation: (1). The amount of the bamboo accumulation in this country, compared with that of pre-worldwar II, is reduced as much as 300, 000 fagots(on fagot amounts to 25 pieces), and now the acreage of the bamboo field is 32, 200$\textrm{km}^2$s. (2). At a mountian peak in Kunoe-myon Wando-kun Cholla-Namdo, I found out a new specis. (Shasamorpha chiisanensis NAKAI Forma wan-Ponia H. P. CHONG) (3). The kinds of the autogenous wild bamboo in this country are as follows; a). 8 kinds in Sinoarundinaria. (5 Spp; 2 For; 1 Var) b). 1 kinds in Pieioplastus. (1 Spp) c). 2 kinds in Pseudosasa. (1 Spp; 1Var.) d) 4 kinds in Sasamorpha. (2 Spp; 1 For.; 1 Var.) e). 4 kinds in Sasa. (4 Spp) In total there are nineteen(19) kinds of autogenous wild bamboo in this country. When adding to this thethirty five (35) species which the japanese has transplanted in Kyongsang-Namdo Forestry Expreimental stations, there are in all fifty four (54) spe ies in this country. (4). As for the distribution of the Northern limitation of the bamboo growing, I found that Sinoarundinaria nigra OHWI var, Henonis HONDA can be cultivated as for as Kosongkun, Kangwon-Do, andSinoarundinaria pubescens HONDA as for as Clung Chong Namdo, and Sinoarundinaria reticulata as far as chung Chong-Pukdo.

• Journal of Distribution Science
• /
• v.15 no.6
• /
• pp.77-96
• /
• 2017

Purpose - This study aims to develop correspondence strategies to the environment change in domestic retail store types. Recently, new types of retails have emerged in retail industries. Therefore, trade area platform has developed focusing on the speed of data, no longer trade area from district border. Besides, 'trade area smart' brings about change in retail types with the development of giga internet. Thus, context shopping is changing the way of consumers' purchase pattern through data capture, technology capability, and algorithm development. For these reasons, the sales estimation model has been shown to be flawed using the notion of former scale and time, and it is necessary to construct a new model. Research design, data, and methodology - This study focuses on measuring retail change in large multi-shopping mall for the outlook for retail industry and competition for trade area with the theoretical background understanding of retail store types and overall domestic retail conditions. The competition among retail store types are strong, whereas the borders among them are fading. There is a greater need to analyze on a new model because sales expectation can be hard to get with business area competition. For comprehensive research, therefore, the research method based on the statistical analysis was excluded, and field survey and literature investigation method were used to identify problems and propose an alternative. In research material, research fidelity has improved with complementing research data related with retail specialists' as well as department stores. Results - This study analyzed trade area survival and its pattern through sales estimation and empirical studies on trade areas. The sales estimation, based on Huff model system, counts the number of households shopping absorption expectation from trade areas. Based on the results, this paper estimated sales scale, and then deducted modified probability model. Conclusions - In times of retail store chain destruction and off-line store reorganization, modified Huff model has problems in estimating sales. Transformation probability model, supplemented by the existing problems, was analyzed to be more effective in competitiveness business condition. This study offers a viable alternative to figure out related trade areas' sale estimation by reconstructing new-modified probability model. As a result, the future task is to enlarge the borders from IT infrastructure with data and evidence based business into DT infrastructure.

• Proceedings of the Korean Society of Rheology Conference
• /
• 2006.06a
• /
• pp.81-84
• /
• 2006

Slot coating process, in continuous and patch modes, has been applied for the many precise coating products, e.g., flat panel displays and second batteries. However, manufacturing uniform coating products is not a trivial task at high-speed operations because various flow instabilities or defects such as leaking, bubbles, ribbing, and rivulets are frequently observed in this process. It is no wonder, therefore, that many efforts to understand the various aspects of dynamics and coating windows of this process have been made both in academia and industry. In this study, as the first topic, flow dynamics within the coating bead in slot coating process has been investigated using the one-dimensional viscocapillary model by lubrication approximation and two-dimensional model by Flow-3D software. Especially, operability windows in both 1D and 2D cases with various slot die lip designs have been successfully portrayed. Also, effects of process conditions like viscosity and coating gap size on slot coating window have been analyzed. Also, some experiments to find minimum coating thickness and coating windows have been conducted using slot die coater implemented with flow visualization device, corroborating the numerical results. As the second topic, flow dynamics of both Newtonian and Non-Newtonian fluids in patch or pattern slot coating process, which is employed in manufacturing IT products such as secondary batteries, has been investigated for the purpose of optimal process designs. As a matter of fact, the flow control in this system is more difficult than in continuous case because od its transient or time-dependent nature. The internal die and die lip designs for patterned uniform coating products have been obtained by controlling flow behaviors of coating liquids issuing from slot. Numerical simulations have been performed using Fluent and Flow-3D packages. Flow behavior and pressure distribution inside the slot die has been compared with various die internal shapes and geometries. In the coating bead region, efforts to reduce irregular coating defects in head and tail parts of one patterned coating unit have been tried by changing die lip shapes. It has been concluded that optimal die internal design gas been developed, guaranteeing uniform velocity distribution of both Newtonian and shear thinning fluids at the die exit. And also optimal die lip design has been established, providing the longer uniform coating layer thickness within one coating unit.