• Tribology and Lubricants
• /
• 제36권1호
• /
• pp.1-10
• /
• 2020

Large-area two-dimensional (2D) materials synthesized by chemical vapor deposition on donor substrates are promising functional materials for conductors, semiconductors, and insulators in flexible and transparent devices. In most cases, 2D materials should be transferred from a donor substrate to a target substrate; however, 2D materials are prone to damage during the transfer process. The damages to 2D materials during transfer are caused by contamination, tearing, and chemical doping. For the commercialization of 2D materials, a damage-free, large-area, and productive transfer process is needed. However, a transfer process that meets all three requirements has yet to be developed. In this paper, we review the recent progress in the development of transfer processes for 2D materials, and discuss the principles, advantages, and limitations of each process. The future prospects of transfer processes are also discussed. To simplify the discussion, the transfer processes are classified into four categories: wet transfer, dry transfer, mechanical transfer, and electro-chemical transfer. Finally, the "roll-to-roll" and "roll-to-plate" dry transfer process is proposed as the most promising method for the commercialization of 2D materials. Moreover, for successful dry transfer of 2D materials, it is necessary to clearly understand the adhesion properties, viscoelastic behaviors, and mechanical deformation of the transfer film used as a medium in the transfer process.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.538-541
• /
• 2005

Tidal flats develop along the south coast ofthe Korean peninsula. These areas are famous for sea farming. Specially, strong and coherent radar backscattering signals are observed over oyster sea farms that consist of artificial structures. Tide height in oyster farm is possible to measure by using interferometric phase and intensity of SAR data. It is assumed that the radar signals from oyster farm could be considered as double-bouncing returns by vertical and horizontal bars. But, detailed backscattering mechanism and polarimetric characteristics in oyster farm had not been well studied. We could not demonstrate whether the assumption is correct or not and exactly understand what the properties of back scattering were in oyster farm without full polarimetric data. The results of AIRSAR L-band POLSAR data, experiments in laboratory and JERS-l images are discussed. We carried out an experiment simulating a target structure using vector network analyser (Y.N.A.) in an anechoic chamber at Niigata University. Radar returns from vertical poles are stronger than those from horizontal poles by 10.5 dB. Single bounce components were as strong as double bounce components and more sensitive to antenna look direction. Double bounce components show quasi-linear relation with height of vertical poles. As black absorber replaced AI-plate in bottom surface, double bounce in vertical pole decreased. It is observed that not all oyster farms are characterized by double bounced scattering in AIRSAR data. The image intensity of the double bounce dominant oyster farm was investigated with respect to that of oyster farm dominated by single bounce in JERS-l SAR data. The image intensity model results in a correlation coefficient (R2 ) of 0.78 in double bounce dominant area while that of 0.54 in single bouncing dominant area. This shows that double bounce dominant area should be selected for water height measurement using In8AR technique.

• 한국전자통신학회논문지
• /
• 제11권12호
• /
• pp.1209-1218
• /
• 2016

4대의 전동실린더를 이용하여 대형 유리판과 같은 부하를 신속하고 안전하게 이송하기 위해서는 동기오차가 허용된 범위 내에서 지속적으로 유지되어야 한다. 본 연구에서는 4대 이상의 전동실린더 간의 동기화에 적용 가능한 동기제어기법이 제안된다. 이 동기제어시스템은 디커플링 구조에 기반을 두고 있으며, 기준모델, 위치제어기 그리고 동기제어기로 구성된다. 기준모델은 각각의 실린더에 대해 상호 분리된 동기오차와 제어입력의 계산이 가능하도록 한다. I-PD형의 위치제어기는 각 실린더가 오버슈트와 입력포화를 일으키지 않고 지령을 추종하도록, 그리고 진상보상기형의 동기제어기는 루프정형을 통해 안정적으로 정밀한 동기가 되도록 설계 된다. 끝으로 토크외란이 인가된 상태에서도 4개의 실린더가 신속하고 안정적으로 동기를 유지하면서 목표지점에 도달됨을 시뮬레이션으로 검증한다.

• 한국콘텐츠학회논문지
• /
• 제11권4호
• /
• pp.207-214
• /
• 2011

이 연구는 건강한 성인을 대상으로 30%체중지지 수행력이 되먹임 형태와 보행보조도구에 따라 차이가 있는지를 알아보고, 이를 통해 효과적인 체중지지 훈련방법을 제안하기 위해 실시되었다. 20명의 건강한 성인이 참여하였으며, 겨드랑이 목발과 바퀴보행기를 이용하여 3점 보행을 하는 동안 오른쪽 발에 체중의 30%만 부하하도록 하였다. 훈련을 위해 동적 되먹임과 정적 되먹임을 제공하였다. 훈련 직후와 훈련 3일 후, 보행 동안 %체중지지를 측정하기 위해 힘판을 이용하였고 보행관련 변수를 측정하기 GAITRite를 사용하였다. 30%체중지지의 정확성은 겨드랑이 목발을 이용하고 동적 되먹임을 받았을 때가 가장 정확하였다(p>0.05). 보행보조도구와 되먹임 형태에 따라 %체중지지는 유의한 차이를 보였으며(p<0.05), 훈련 직후와 훈련 3일후의 %체중지지는 유의한 차이를 보이지 않았다(p>0.05). 또한 보행보조도구에 따라 보행속도와 입각기비율이 유의한 차이를 보였다(p<0.05). 따라서 효과적인 체중지지 훈련을 위해서는 가능한 경우 겨드랑이 목발을 이용하여 동적 되먹임을 통한 %체중지지를 교육하는 것이 필요할 것으로 생각된다.

• 한국의류산업학회지
• /
• 제19권5호
• /
• pp.579-588
• /
• 2017

This study investigates the wearing behavior and athleisure wear design preferences of women in their twenties as related to the design development of athleisure wear. A questionnaire survey was conducted on 185 women in their 20s. The survey was conducted from September to October 2016. Questionnaire items consisted of respondents' general items, athleisure wear and preference related items, and athleisure wear purchase related items. We collected 185 questionnaires from participants; subsequently, 169 were used as analytical data (except for incomplete questionnaires). The results of the study are as follows. Fit and wear comfort was the most important factor in the selection of athleisure wear. As a result of investigating the popularity of the athletic wear brand, the preference for the total sportswear brand was higher than the professional athletic wear brand. When the preferred colors were examined, the achromatic colors were ranked higher than chromatic colors. An examination of the preferred designs according to items indicated that the bra top preferred the 'U' shaped front plate and the 'Y' base basic type; in addition, T-shirts with the round neckline and the 1/4 length sleeves were preferred as tops. Leggings preferred long length type. It is necessary to develop a brand that matches the preference of the twenties' consumers by adjusting the aged target that can avoid the overheated competition and develop a niche market.

• 한국강구조학회 논문집
• /
• 제15권1호
• /
• pp.25-31
• /
• 2003

본 연구는 데크플레이트의 모멘트 강도에 관한 실험적, 이론적 연구를 수행하였다. 실물크기의 14개 모멘트 실험을 행하였으며, 가력부의 국부좌굴을 방지하기 위해 1/4지점 집중하중을 가력하였다. 기준식들 간의 차이점을 이론적으로 비교분석하였다. 또한 미국 AISI, 유럽 EC3, 한국 기준과 실험값을 비교 평가하였다. 파괴모드는 보 중앙부의 국부좌굴 및 중간가력부의 국부좌굴에 의하여 형성되어 최대내력에 도달하였다. 인장측이 먼저 항복하는 경우 소성능력이 인장측에서 발휘되어 내력이 증대하였다. 설험결과는 인장측 부분 소성화를 고려한 EC 기준과 가장 잘 일치하였다. EC3 부록Z에 의한 통계학적 평가로부터 EC3 기준식이 목표로 하는 $^{\circ}{_M}=1.1$ 이내로 그 적용성이 만족되었다. AISI와 KS 기준에서도 소성화 개념을 추가한다면, 이론해석이 보다 더 개선될 것이다.

• Clinical and Experimental Pediatrics
• /
• 제48권6호
• /
• pp.665-668
• /
• 2005

저자들은 구루병의 가족력이 있으면서 구루병의 전형적인 임상소견과 저칼슘혈증, 알칼라인 포스파타제의 상승, 2차적인 부갑상선 기능 항진증을 보인 1례를 경험하였기에 문헌고찰과 함께 보고하는 바이다.

• 한국분말재료학회지
• /
• 제21권5호
• /
• pp.349-354
• /
• 2014

This study is a basic research for repair material production which manufactured a Cu repair coating layer on the base material of a Cu plate using kinetic spray process. Furthermore, the manufactured material underwent an annealing heat treatment, and the changes of microstructure and macroscopic properties in the Cu repair coating layer and base material were examined. The powder feedstocks were sphere-shaped pure Cu powders with an average size of $27.7{\mu}m$. The produced repair coating material featured $600{\mu}m$ thickness and 0.8% porosity, and it had an identical ${\alpha}$-Cu single phase as the early powder. The produced Cu repair coating material and base material displayed extremely high adhesion characteristics that produced a boundary difficult to identify. Composition analysis confirmed that the impurities in the base material and repair coating material had no significant differences. Microstructure observation after a $500^{\circ}C/1hr$. heat treatment (vacuum condition) identified recovery, recrystallization and grain growth in the repair coating material and featured a more homogeneous microstructure. The hardness difference (${\Delta}H_v$) between the repair coating material and base material significantly reduced from 87 to 34 after undergoing heat treatment.

• 기술사
• /
• 제15권4호
• /
• pp.12-24
• /
• 1982

East Parts of Bangladesh have been benifited by low cost energy generated by domestic natural gas but West parts where energy generated by imported fuel. Bangladesh Government authority has very much concerned to transmit the low cost electricity to the West from the East for past several years. To solve such concerns, cross-country 230kv double circuits Power transmission line was proposed, however there was a big obstacle for the realization of this line to cross the Jamuna river which has 12 km long width with a deep muddy river bed. A consultant engineering firm named Merz-Mclellan anyway finalized this plan and a world-wide bid was announced on June 31, 1979. Due to the expected difficulty to construct the towers on sea like area, only three construction groups have participated. including a Korean joint venture organization of Samsung-Korean Developement corporation-Kolon Electric Machinery company. After 3 months bid evaluation, contract was awarded to Korean Consosium and KEM Co was in charge of designing steel towers with anchor bolts and base plates beside to electrical engineering field. Then KEM Co have faced and over-comed many unenpected technical difficulties such as forced eccentricity joint on base plate, distorsion issue of 60mm thick plates welding, threading anchor bolts, tad heat treatment of some anchor bolts, disagreement from Consultant Engineer on multiplying factor of leg stresses for 45$^{\circ}$ wind and on reducing O.L.F for wind loads on cables for such 1220km long spans. After spending two years long period for designing and engineering towers, base plates, and anchor bolts, first shipment of tower was finally realized on Nov. 8, 1981 and on the other hand KDD has proceeded concrete caisson work on schedule at Jamuna river site and expected to complete tower erection and stringing of cables within this year of 1982 which was original completion target.

• Journal of Magnetics
• /
• 제3권2호
• /
• pp.55-63
• /
• 1998

Magnetic and magnetostrictive properties of amorphous Sm-Fe and Sm-Fe-B thin films are systematically investigated over a wide composition range from 14.1 to 71.7 at.% Sm. The films were fabricated by rf magnetron sputtering using a composite target composed of an Fe (or Fe-B) plate and Sm chips. The amount of B added ranges from 0.3 to 0.8 at. %. The microstructure, examined by X-ray diffraction, mainly consists of an amorphous phase in the intermediate Sm content range from 20 to 45 at.%. Together with an amorphous phase, crystalline phases of Fe and Sm also exist at low and high ends of the Sm content, respectively. Well-developed in-plane anisotropy is formed over the whole compositionrange, except for the low Sm content below 15 at.% and the high Sm content above 55 at %. As the Sm content increases, the saturation magnetization decreases linearly and the coercive force tends to increase, with the exception of the low Sm content where very large magnitudes of the saturation magnetization and the coercive force are observed due to the existence of the crystalline $\alpha$-Fe phase. The coercive force is affected rather substantially by the B addition, resulting in lower values of the coercive force in the practically important Sm content range of 30 to 40 at.%. Good magnetic softness indicated by well-developed in-plane anisotropy, a square-shaped hysteresis loop and a low magnitude of the coercive force results in good magnetostrictive characteristics in both Sm-Fe-B thin films. The magnetostrictive characteristics, particularly at low magnetic fields, are further improved by the addition of B; for example, at a magnetic field of 100 Oe, the magnitude of magnetostriction is -350 ppm in a Sm-Fe thin film and it is -470 ppm in a B containing Sm-Fe thin film.