• Journal of Nutrition and Health
• /
• v.37 no.10
• /
• pp.938-945
• /
• 2004

The purposes of this study were to survey the present situation of nutrition education in junior/senior high school, to analyze the difference between the favorite subjects on students and the existing subject done by dietitians on nutrition education, and then to identify the subjects of nutritional education for junior/senior high school students. Self-administered questionnaires were given to dietitians and students and 142 of the 200 dietitians (71.0%) and 479 of the 564 students (84.9%) responded to the questionnaire on the nutritional education. According to the survey results, 76.1 % of school dietitians currently were doing nutrition education for students while the other 23.9% didn't have such education programs even though they recognized the necessity strongly. The target of nutrition education was student rather than parents or teacher generally and the principal measuring method for nutrition education effect was change of plate waste and leftover'. It was found that significant difference in the collector and source of nutritional education information between junior and senior high school dietitians (p< .05) . About ninety-eight percentage of dietitians felt that nutrition education should keep pace with meal service and this meant that almost respondent recognized the necessity of nutrition education for students. Because the most serious one among operational problems of nutrition education program was lack of enough time owing to too many affairs as dietitian, junior and senior high schools should support so that dietitians would share enough time for nutrition education. And also, a gap was existed between actual and favorite subjects on nutrition education. Significant differences existed in the following subjects; 'basic concept of food and nutrition', 'disease and nutrition', 'food culture in the world', 'cooking and culinary art', 'food of the 24 divisions of the year in the lunar calendar', 'food waste and environmental issue', 'food habit and food behavior', 'exercise and nutrition' (p< .001) 'table manner', 'food and individual sanitation', 'recommended dietary allowance' (p < .01) and 'menu planning' (p< .05) .Finally, 24 subjects of nutritional education were selected based on the survey results. These subjects would be expected to be able to contribute the effective and interesting nutrition education program for junior and senior high school students.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.1
• /
• pp.45-53
• /
• 2008

In this paper, the property of influent water and variations of removal efficiencies in each unit processes were studied based on the experiment data from the advanced water treatment plant in a city of Korea. The microbial species in the biological activated carbon(BAC) after backwashing of activated carbon filtration tank(ACFT) were also identified. The property and the removal efficiencies were evaluated by considering 8-9 items. The variations of 4 items were investigated from the influent and effluent of ACFT. SEM recording were conducted on BAC samples before and after backwashing. And the existence of attached microorganisms were identified through HPC(Heterotrophic Plate Counter) investigation. For the property of influent water, the concentrations of most items were maintained in the constant ranges, some items had seasonal properties. For the removal efficiencies, there were some items showing similar monthly-pattern and increasing with time, other items decreasing at the ozone contactor. Through these investigations, it was possible to distinguish the target items, which were removed by the advanced processes. The existence of microorganisms in ACFT could be predicted based on the variation curve of NH$_3$-N, and this fact were proved by SEM and HPC.

• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.713-717
• /
• 2001

The magnetic and magnetostrictive properties of amorphous Tb/sub 45.7/Fe/sub 54.3-x/Co/sub x/ and Tb/sub 50.2/Fe/sub 49.8-x/Co/sub x/ (0≤x≤9.6) thin films have systematically been investigated. The films were fabricated by rf magnetron sputtering using a composite target which consists of a Fe plate and Tb, Co chips. The microstructure mainly consists of an amorphous phase. Excellent intrinsic and low magnetic-field-magnetostrictive properties were achieved in Tb/sub 45.7/Fe/sub 54.3-x/Co/sub x/ and Tb/sub 50.2/Fe/sub 49.8-x/Co/sub x/ (0≤x≤9.6). The magnetostriction of 130 ppm was obtained with low field of 100 Oe. The intrinsic magnetostriction(applied field, 5 kOe) were increased from 330ppm to 400ppm.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.1
• /
• pp.43-53
• /
• 1985

This study proposes a reliability based design criteria for the steel bridge (H-beam, plate-girder and composite-beam), which is most common type of steel bridge, and also proposes the theoretical bases of nominal safety factors as well as load and rasistance factors based on the reliability theory. Major 2nd moment reliability analysis and design theories including both Cornell's MFOSM (Mean First Order 2nd Moment) Methods and Lind-Hasofer's AFOSM(Advanced First Order 2nd Moment) Methods are summarized and compared, and it has been found that Lind-Hasofer's approximate and an approximate Log-normal type reliability formula are well suited for the proposed reliability study. A target reliability index (${\beta}_0=3.5$) is selected as an optimal value considering our practice based on the calibration with the safety pravisions of the current steel bridge design code. Galambo's theory is used for the derivation of the algorithm for the evaluation of uncertainties associated with resistences by LRFD Format and SGST Format, whereas the magnitude of the uncertainties associated with load effects are chosen primarily by considering our level of practice. It may be concluded that the proposed LRFD reliability based design provisions for the steel highway bridge give more rational design than the current standard code for steel highway bridge.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.196-196
• /
• 2017

Oilseed crop Camelina (Camelina sativa L.) is a suitable for biodiesel production that has high adaptability under low-nutrient condition like marginal land and requires low-input cost for cultivation. Enhanced abiotic stress tolerance of Camelina is very important for oil production under the wide range of different climate. CsRCI2s (Rare Cold Inducible 2) are related proteins in various abiotic stresses that predicted to localized at plasma membrane (PM) and endoplasmic reticulum (ER). These proteins are consist of eight-family that can be divided into tail (CsRCI2D/E/F/G) and no-tail (CsRCI2A/B/E/H) type of C-terminal. However, it is still less understood the function of C-terminal tail. In this study, CsRCI2D/H genes were cloned through gateway cloning system that used pCB302-3 as destination vector. And we used agrobacterium-mediated transformation system for generation of overexpression (OX) transformants. Overexpression of target gene was confirmed using RT-PCR and segregation ratio on selection media. We analyzed physiological response in media and soil under abiotic stresses using CsRCI2D and CsRCI2H overexpression plant. To compare abiotic stresses tolerance, wild type and CsRCI2D/H OX line seeds were sown on agar plate treated with various NaCl and mannitol concentration for 7 days. In the test of growth rate under abiotic stress on media, CsRCI2H OX line showed similar to NaCl and mannitol stress. In the other hand, CsRCI2D OX line showed to be improved stress tolerance that especially increased in 200mM NaCl but was similar on mannitol media. In greenhouse, WT and CsRCI2D/H OX lines for physiological analysis and productivity under abiotic stresses were treated 100, 150, 200mM NaCl. Then it was measured various parameters such as leaf width and length, plant height, total seed weight, flower number, seed number. CsRCI2H OX line in greenhouse did not show any changes in physiological parameters but CsRCI2D OX line was improved both physiological response and productivity under NaCl stress. Among physiological parameters of CsRCI2D OX line under NaCl stress, leaf length and width were observed shorter than WT but it were slightly longer than WT in 200mM NaCl stress. Furthermore, total seed weight of CsRCI2D OX line under stress displayed to decrease than WT in normal condition, but it was gradually raised with increasing NaCl stress then more than WT relatively. These results suggested CsRCI2D might be contribute to improve abiotic stress tolerance. However, function of CsRCI2H is need to more detail study. In conclusion, overexpression of CsRCI2s family can generate various environmental stress tolerance plant and may improve crop productivity for bio-energy production.

• Journal of Korean Society of Transportation
• /
• v.18 no.6
• /
• pp.7-17
• /
• 2000

The Purpose of this study is to test the effectiveness of Special Transportation Management Zone system (TZ) when it is applied to Dongdaemoon commercial zone located in downtown Seoul. The study consists of two Parts ; the legal components of TZ and the case study on Dongdaemoon district. The case study includes the analysis of current traffic situation on the study zone, the design of implemention alternative for each component of TZ, the framework of impact analysis system, and the analysis results. The study finds, if 2,000 won mandatory parking fee on drivers parking in the buildings only with over 10 parking spaces and over 3.000$m^2$ in floor area, strong illegal parking enforcement, and Pro-hibition of parking passenger cars whose last digit plate number matches with the last digit of date, are implemented in the zone simultaneously, the traffic speed increases to 20.56km/h which is above the target set in the zone. In conclusion, we find that TZ2 can be an effective tool relieving traffic congestion in Seoul, and that it is necessary for introducing TZ in Seoul that relevant laws should be revised and expecting problems should be overcome.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.3
• /
• pp.165-172
• /
• 2016

An experimental study of the thermal-hydraulic characteristics of passive safety systems (PSSs) was conducted using a system-integrated modular advanced reactor-integral test loop (SMART-ITL). The present passive safety injection system for the SMART-ITL consists of one train with the core makeup tank (CMT), the safety injection tank, and the automatic depressurization system. The objective of this study is to investigate the injection effect of the PSS on the small-break loss-of-coolant accident (SBLOCA) scenario for a 0.4 inch line break in the safety-injection system (SIS). The steady-state condition was maintained for 746 seconds before the break. When the major parameters of the target value and test results were compared, most of the thermal-hydraulic parameters agreed closely with each other. The water level of the reactor pressure vessel (RPV) was maintained higher than that of the fuel assembly plate during the transient, for the present CMT and safety injection tank (SIT) flow rate conditions. It can be seen that the capability of an emergency core cooling system is sufficient during the transient with SMART passive SISs.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.3
• /
• pp.231-239
• /
• 2003

Many box girder bridges have been constructed during the past several decades due to their large bending and torsional rigidities as well as aesthetic considerations. However, box girders have shortcoming in that the cross section distorts under an eccentric loading and warps out of the section plane. Therefore, in order to reduce distortional stresses such as distortional warping and transverse bending normal stresses, diaphragms were generally installed in the box girders. Shapes of the diaphragms in steel-box-girder bridges constructed up to date were solid-plate, frame, and truss types. The objectives of this study using parametric study were to evaluate the appropriate stiffness ratio of intermediate diaphragms and then to propose the effective spacing and numbers of intermediate diaphragms based on the evaluated stiffness ratio. Target bridges for this study were straight continuous span bridges with a single-cell steel box section. The parameters for the parametric study were the shape of box section, the span numbers, the equivalent span length, the stiffness of intermediate diaphragms, and the spacing of intermediate diaphragms. From the results of the parametric study, the effective spacing and numbers as well as the stiffness ratio of the intermediate diaphragms will be presented.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.12
• /
• pp.55-64
• /
• 2016

In this paper bearing capacity and safety margin of shallow foundation on weathered soil ground against shear failure by using current design method of allowable stress design (ASD), load resistance factor design (LRFD) based on reliability analysis and partial safety factor design (PSFD) in Eurocode were estimated and compared to each other. Results of the plate loading test used in construction and design were collected and analysis of probability statistics on soil parameters affecting the bearing capacity of shallow foundation was performed to quantify the uncertainty of them and to investigate the resistance bias factor and covalence of ultimate bearing capacity. For the typical sections of shallow foundation in domestic field as examples, reliability index was obtained by reliability analysis (FORM) and the sensitivity analysis on soil parameters of probability variables was performed to investigate the effect of probability variable on shear failure. From stability analysis for these sections by ASD, LRFD with the target reiability index corresponding to the safety factor used in ASD and PSDF, safety margins were estimated respectively and compared.

• Korean Journal of Cleft Lip And Palate
• /
• v.10 no.1
• /
• pp.1-16
• /
• 2007

이차구개는 발생과정에서 구개선반의 형성과 성장, 거상과 융합의 과정을 통해 형성된다. 이와 같은 이차구개의 형성과정은 미세한 분자유전학적 신호전달기전에 의해 조절되는 것으로 알려져 있어서, 신호전달과정에 관여하는 유전인자의 발현이상이 되면 정상적인 이차구개가 형성되지 못하고 구개파열이라는 선천성 기형이 발생된다. 구개파열의 유발인자들에 대한 많은 연구에도 불구하고 현재까지 정상적인 이차구개의 형성을 조절하는 분자유전학적 기전에 대해서는 명확히 알려져 있지 않다. 따라서 본 연구에서는 이차구개의 형태분화를 조절하는 분자유전학적 기전을 알아보고자, 이차구개 형성의 내적 조절인자 중 핵심유전자로 알려져 있는 Osr2가 결손된 생쥐의 이차구개 형성과정에서 정상생쥐에 비해 발현의 변동이 나타나는 유전자를 확인하였다. 유전자 발현의 변동은 발생 14.5일(E14.5)의 구개선반으로부터 추출한 total RNA를 이용하여 ACP-based GeneFishing PCR을 시행하여 확인하였고, 각각의 변동된 유전자를 동정하여 정상생쥐의 이차구개 형성과정에서의 발현양상을 in situ hybridization을 시행하여 확인하였다. 총 120쌍의 primer를 이용한 검색을 통해서 정상생쥐의 구개선반에 비해 mutant에서 발현이 변동된 유전자는 7개가 검출되었고, 이들은 모두 정상생쥐에 비해 mutant에서 발현이 증가되는 것으로 확인되었다. 검출된 유전자는 vimentin(Vim), ${\beta}$-tropomyosin 2(Tpm2), thioredoxin-like 5(Txnl5), procollagen type II alpha 1(Col2a1), Insulin-like growth factor binding protein 7(IGFbp7), Sui 1 homologs(Sui 1), Defender against cell death1(Dad1)이었다. 검출된 유전자를 동정하여 정상생쥐의 구개 형성과정에서의 발현양상을 알아본 결과, Col2a1 을 제외한 유전자들은 모두 E13.5의 구개선반에서 특이적으로 발현되고 있었으나 구개선반이 융합된 E15.5에서는 Vim, Txnl5 그리고 Dad1 만이 봉합선을 따라 발현이 지속되고 있었다. 이상의 결과로 보아 검출된 유전자들은 구개선반의 형태분화과정에서 발현되어 이차구개의 형성과정에 관여할 것으로 여겨진다. 또한 이들은 이차구개 형성의 내적조절인자인 Osr2의 downstream target 으로 구개선반의 성장과 융합과정에 직접적으로 관여하는 유전물질일 것으로 추정된다.