• 한국전자파학회논문지
• /
• 제29권6호
• /
• pp.433-440
• /
• 2018

레이다 안테나에서 송신한 신호가 어떠한 물체에 도달한 뒤 다시 안테나로 수신되는 과정에서, 환경에 의해 생성되는 클러터는 원하지 않는 요소이다. 클러터는 안테나의 빔 패턴과 어떠한 물체의 거리, 고도 등에 의해 계산되며, RCS로 나타낼 수 있다. 지면 기반 레이다에서 임의의 물체에 대한 지표면 클러터 RCS를 구하고, 레이다 방정식을 이용하여 지표면 클러터 RCS가 지면 기반 레이다 안테나에 수신되는 신호에 미치는 영향을 분석해본다.

• 한국컴퓨터정보학회논문지
• /
• 제20권3호
• /
• pp.57-67
• /
• 2015

본 논문에서는 적외선 영상에서 탐지된 표적의 픽셀정보를 이용하여 실제 환경에서의 표적의 위치를 추정하는 geolocation 기법에 대하여 제안한다. 제안하는 기법은 지대지 전장 환경에서 공중 정찰을 통한 적대 표적의 위치를 파악하는 시스템에 적용이 가능하다. 적대 표적의 geolocation에 영향을 주는 요소는, 시스템의 광학적 왜곡, 지형적 왜곡, 정찰 모듈의 GPS(Global Positioning System) 및 IMU(Inertial Measurement Unit) 왜곡을 들 수 있다. 본 논문에서는 광학적 왜곡과 지형적 왜곡에 적응적인 geolocation 을 위하여 광학 정보의 다항식 최적화와 지구 곡률을 고려한 시선거리 계산 기법을 적용하였으며, 3차원 모의 환경에서 실험한 결과 시스템 요구사항 내에서 geolocation의 정확도를 만족함을 확인하였다.

• 한국응용과학기술학회지
• /
• 제26권1호
• /
• pp.38-44
• /
• 2009

We proposed the new nano-carbon ball (NCB) materials for eliminating the total volatile organic compounds(TVOCs) from the felt which is built in the car. The concentrations of acetaldehyde and formaldehyde of the original felts were varied upon the different production lots. Acetaldehyde in the felt can be eliminated to target level($0.2{\mu}g$) after introducing 0.5 wt% of NCB into the felt. Detector tube method for analyzing formaldehyde gas was more accurate than HPLC method. Formaldehyde can be eliminated to target level (64 ppb) after introducing 0.5 wt% of NCB into the felt. We also found that TVOC can be reduced to target level ($0.32{\mu}g$) after introducing 2.0 wt% of NCB. Upon introducing small amounts of NCB into the felt, it was possible that the level of formaldehyde, acetaldehyde and TVOC formed from the felts can be reduced to the target level. We also suggest the effective analyzing method of TVOCs.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2007년도 추계학술대회 및 정기총회
• /
• pp.237-248
• /
• 2007

Activating e-commerce, studies about trust of business acquaintance are actively made. This study measured the effect of trust transfer setting up 6 situations according to linking direction, design standard and grasping their trust changes for surveying trust transfer on online. The result is that trust transfer becomes different in accordance with the linking direction of hyperlink. In other words, setting up target site as comparative subject, it is more reliable than single site. Setting up source site as comparative subject, trust changes are slight. This study is composed of 6 good site and 6 poor site. And trust transfer by hyperlink on online is consistent, especially trust transfer is affected by not source site but target site. If target site is poorer than source site, trust transfer originate definitely. So we can draw consistent conclusion that it rate higher than single site. On the other hands, if targer site is better than source site, trust transfer occurs not inter-website. Instead, affected by human mentality, it rates good site higher by conformity reversion.

• 한국분말재료학회지
• /
• 제15권1호
• /
• pp.1-5
• /
• 2008

ZnS-$SiO_2$ composite is normally used for sputtering target. In recent years, high sputtering power for higher deposition rate often causes crack formation of the target. Therefore the target material is required that the sintered target material should have high crack resistance, excellent strength and a homogeneous microstructure with high sintered density. In this study, raw ZnS and ZnS-$SiO_2$ powders prepared by a 3-D mixer or high energy ball-milling were successfully densified by spark plasma sintering, the effective densification method of hard-to-sinter materials in a short time. After sintering, the fracture toughness was measured by the indentation fracture (IF) method. Due to the effect of crack deflection by the residual stress occurred by the second phase of fine $SiO_2$, the hardness and fracture toughness reached to 3.031 GPa and $1.014MPa{\cdot}m^{1/2}$, respectively.

• 한국분말재료학회지
• /
• 제21권2호
• /
• pp.137-141
• /
• 2014

In this study, we report the sintering behavior and properties of a $Ge_2Sb_2Te_5$ alloy powders for use as a sputtering target by spark plasma sintering. The effect of various sintering parameters, such as pressure, temperature and time, on the density and hardness of the target has been investigated in detail. Structural characterization was performed by scanning electron microscopy and X-ray diffraction. Hardness and thermal properties were measured by differential scanning calorimetry and micro-vickers hardness tester. The density and hardness of the sintered $Ge_2Sb_2Te_5$ materials were 5.8976~6.3687 $g/cm^3$ and 32~75 Hv, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권2호
• /
• pp.360-372
• /
• 2020

Objective: Specific genomic sites can be recognized and permanently modified by genome editing. The discovery of endonucleases has advanced genome editing in pigs, attenuating xenograft rejection and cross-species disease transmission. However, off-target mutagenesis caused by these nucleases is a major barrier to putative clinical applications. Furthermore, off-target mutagenesis by genome editing has not yet been addressed in pigs. Methods: Here, we generated genetically inheritable α-1,3-galactosyltransferase (GGTA1) knockout Yucatan miniature pigs by combining transcription activator-like effector nuclease (TALEN) and nuclear transfer. For precise estimation of genomic mutations induced by TALEN in GGTA1 knockout pigs, we obtained the whole-genome sequence of the donor cells for use as an internal control genome. Results: In-depth whole-genome sequencing analysis demonstrated that TALEN-mediated GGTA1 knockout pigs had a comparable mutation rate to homologous recombination-treated pigs and wild-type strain controls. RNA sequencing analysis associated with genomic mutations revealed that TALEN-induced off-target mutations had no discernable effect on RNA transcript abundance. Conclusion: Therefore, TALEN appears to be a precise and safe tool for generating genomeedited pigs, and the TALEN-mediated GGTA1 knockout Yucatan miniature pigs produced in this study can serve as a safe and effective organ and tissue resource for clinical applications.

• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.192-198
• /
• 2005

In this paper, we propose a new training system for the improvement of equilibrium sense using unstable platform. The equilibrium sense, which provides orientation with respect to gravity, is important to integrate the vision, somatosensory and vestibular function to maintain the equilibrium sense of the human body. In order to improve the equilibrium sense, we developed the software program such as a block game, pingpong game using Visual C++. These training system for the equilibrium sense consists of unstable platform, computer interface and software program. The unstable platform was a simple structure of elliptical-type which included tilt sensor, wireless RF module and the device of power supply. To evaluate the effect of balance training, we measured and evaluated the parameters as the moving time to the target, duration to maintain cursor in the target of screen and the error between sine curve and acquired data. As a results, the moving time to the target and duration to maintain cursor in the target was improved through the repeating training of equilibrium sense. It was concluded that this system was reliable in the evaluation of equilibrium sense. This system might be applied to clinical use as an effective balance training system.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2005년도 제30회 춘계학술대회
• /
• pp.47-50
• /
• 2005

The aim of radiosurgery cures a patient to deliver the lower dose at the normal organ and the higher dose at the tumor. Therefore accuracy of the dose is required to gain effect of radiosurgery in surgical planning. In this paper, we developed the methods of target approximation for a fast treatment planning. Nominally, the stereotactic radiosurgery(SRS) using Linac and Gamma knife produces spherical dose distribution through circular collimators using multiple arcs and 201 holes on semi-spherical helmet by $^{60}Co$. We developed an automatic radiosurgical plan about spherical packing arrangement. To automatically plan the SRS, new planning methods based on cylinder and cube structure for target shaping was developed. This approach using heuristic and stochastic algorithm is a useful radiosurgical plan without restrictions in the various tumor shapes and the different modalities.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.325-325
• /
• 2013

본 연구에서는 선형 대향 타겟 스퍼터(Linear Facing Target Sputtering: LFTS) 시스템을 이용하여 성막한 Ti-doped In2O3 (TIO) 투명 전극의 전기적, 광학적 특성을 연구하였다. LFTS 시스템을 이용하여 유리기판 위에 TIO 박막을 증착시킬 때, 타겟과 기판 사이의 거리(Target-to-Substrate Distance)를 30 mm, 타겟과 타겟 사이의 거리(Target-to-Target Distance)를 65 mm, Ar/$O_2$ 가스의 비율 100：1로 각각 고정한 후, TIO 타겟에 인가되는 DC 파워와 공정압력을 변수로 TIO 박막을 하였다. LFTS 공정을 이용한 TIO 투명전극의 성막 공정 중 DC파워와 공정압력 변화에 따른 구조적, 표면적 특성 변화는 field-effect scanning electron microscopy (FE-SEM) 과 x-ray diffractometry (XRD) 분석을 통해 관찰되었다. 이렇게 증착된 200 nm 두께의 TIO 투명전극은 급속열처리 시스템으로 700도에서 후 열처리를 진행하였으며 상온에서 217.5 ohm/sq의 면저항을 나타내는 TIO박막이 열처리후 35 ohm/sq로 면저항이 급격히 감소됨을 확인하였다. 뿐만 아니라 열처리후 가시광선 영역 (400~800 nm)에서의 TIO 박막의 평균 투과율이 81.02%에서 83.4%로 향상됨을 UV/visible spectrometry 분석을 통해 확인하였다. 본 연구에서는 다양한 분석을 통해 TIO 박막의 특성과 ITO와 구별되는 다양한 장점을 소개한다.