• Korean Journal of Materials Research
• /
• v.23 no.12
• /
• pp.667-671
• /
• 2013

We present an easy method of preparing two-dimensional (2D) periodic hollow tin oxide ($SnO_2$) hemisphere array gas sensors using polystyrene (PS) spheres as a template. The structures were fabricated by the sputter deposition of thin tin (Sn) metal over an array of PS spheres on a planar substrate followed by calcination at an elevated temperature to oxidize Sn to $SnO_2$ while removing the PS template cores. The $SnO_2$ hemisphere array structures were examined by scanning electron microscopy and X-ray diffraction. The structures were calcined at various temperatures and their sensing properties were examined with varying operation temperatures and concentrations of nitric oxide (NO) gas. Their gas-sensing properties were investigated by measuring the electrical resistances in air and the target gases. The measurements were conducted at different NO concentrations and substrate temperatures. A minimum detection limit of 30 ppb, showing a sensitivity of S = 1.6, was observed for NO gas at an operation temperature of $150^{\circ}C$ for a sample having an Sn metal layer thickness corresponding to 30 sec sputtering time and calcined at $600^{\circ}C$ for 2 hr in air. We proved that high porosity in a hollow $SnO_2$ hemisphere structure allows easy diffusion of the target gas molecules. The results confirm that a 2D hollow $SnO_2$ hemisphere array structure of micronmeter sizes can be a good structural morphology for high sensitivity gas sensors.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.677-684
• /
• 2009

With various sensor network and ubiquitous technologies, we can extend interaction area from a virtual domain to physical space domain. This spatial interaction is differ in that traditional interaction is mainly processed by direct interaction with the computer machine which is a target machine or provides interaction tools and the spatial interaction is performed indirectly between users with smart interaction tools and many distributed components of space. So, this interaction gives methods to users to control whole manageable space components by registering and recognizing objects. Finally, this paper provides an effective spatial interaction method with template-based task mapping algorithm which is sorted by historical interaction data for support of users' intended task. And then, we analyze how much the system performance would be improved with the task mapping algorithm and conclude with an introduction of a GUI method to visualize results of spatial interaction.

• Journal of Integrative Natural Science
• /
• v.9 no.4
• /
• pp.268-274
• /
• 2016

Filariasis causing nematode Brugia malayi is shown to harbor wolbachia bacteria as symbionts. The sequenced genome of the wolbachia endosymbiont from B.malayi (wBm) offers an unprecedented opportunity to identify new wolbachia drug targets. Hence the enzyme carbonic anhydrase from wolbachia endosymbiont of Brugia malayi (wBm) which is responsible for the reversible interconversion of carbon dioxide and water to bicarbonate and protons (or vice versa) is chosen as the drug target for filariasis. This enzyme is thought to play critical functions in bacteria by involving in various steps of their life cycle which are important for survival, The 3D structure of wBm carbonic anhydrase is predicted by selecting a suitable template using the similarity search tool, BLAST. The BLAST results shows a hexapeptide transferase family protein from Anaplasma phagocytophilum (PDB ID: 3IXC) having 77% similarity and 54% identity with wBm carbonic anhydrase. Hence the above enzyme is chosen as the template and the 3D structure of carbonic anhydrase is predicted by the tool Modeller9v7. Since the three dimensional structure of carbonic anhydrase from wolbachia endosymbiont of Brugia malayi has not yet solved, attempts were made to predict this protein. The predicted structure is validated and also molecular docking studies are carried out with the suitable inhibitors that have been solved experimentally.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.73.2-73.2
• /
• 2016

We present the results of KaVA SgrA* observation together with Takahagi(32m), Yamaguchi(32m) and Nobeyama(45m) telescopes at 22 and 43GHz, respectively. In early 2014, G2 cloud was expected to encounter with SgrA* and to make a significant flux variation, but it has not been measured yet. So it's worth to check our amplitude calibration method to confirm if we have a missing flux caused by uncertainty in measuring it. We have tested both a standard method using system noise temperature(Tsys) with antenna gain information, and a template method in order to calibrate antenna gain using nearby maser source. As a result, we found that the latter method is useful for antennas which have inaccurate gain information or poor Tsys measurements, and is especially effective for sources at low elevation like SgrA*. In addition, the comparison shows that the amplitude calibration by standard method can be improved up to 10% with a correction factor using a template method. This result implies we can get more accurate flux from a standard method when any maser source not exists around target.

• Archives of Pharmacal Research
• /
• v.21 no.4
• /
• pp.452-457
• /
• 1998

Three compounds, 5-(acetoxymethyl)-5-(hydroxymethyl)-3-tetradecyl-2,5-dihydro-2-furanone (3), 5-(acetoxymethyl)-5-(hydroxymethyl)-3,3-dihexyltetrahydro-2-furanone (4) and 5-(acetoxymethyl)-5-(hydroxymethyl)-3,3-dioctyltetrahydro-2-furanone (5), were designed and synthesized as surrogates of the ultrapotent DAG analogue, 5-(acetoxymethyl)-5-(hydroxymethyl) 3-[(Z)-tetradecylideneltetrahydro-2-furanone (1), a compound that showed high affinity for PKC-$\alpha$ ($K_1$=35 nM) in a competition binding assay with [$^3H$-20]phorbol-12,13-dibutyrate (PDBU). In an attempt to overcome the problem of generating geometrical E- and Z- isomers, as encountered with 1, the double bond was moved to an endocyclic location as in 3, or an additional alkyl chain was appended to C3 to give the corresponding 3,3-dialkyl saturated lactones (4 and 5). The lactone was constructed from glycidyl-4-methoxyphenyl ether in 5 steps. The target compounds showed reduced binding affinities for PKC-.alpha. with $K_{i}$ values of 192 nM (3), 4,829 nM (4), and 2,812 nM (5), respectively. These results indicate that constrained DAG analogues having a tetrahydro-2-furanone template are effectively discriminated by PKC-(X in terms of the direction of the long alkyl chain connected to the 3-position.n.

• Journal of Life Science
• /
• v.9 no.1
• /
• pp.15-21
• /
• 1999

The random amplified ploymorphic DNAs (RAPD) assay is a simple and useful tool in identification of appropriate genetic markers, that requires no knowledge of target DNA sequence. RAPD products were generated directly from seaweed tissues, without prior nucleic acid extraction, of Porphyra yezoensis, Ulva pertusa and Undaria pinnatifida. The nuclear rDNA internal transcribed spacer (ITS) fragment however was not amplified directly from the seaweed tissues. Using DNA extracted by the LiCl method, both the ITS and RAPD's have been amplified by the polymerase chain reaction. RAPD of P yezoensis, thallus (n) and conchocelis (2n) produced lots of different polymorphic bands (36-50$\%$) depending on the arbitrary primers used. Difference was also observed between direct tissues amplification and DNA extracts amplification (53-57$\%$). Thus it is important to use the same ploidy of tissue for DNA extraction and as a RAPD template.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8C
• /
• pp.803-810
• /
• 2003

This paper addresses an image processing technique for the human papillomavirus (HPV) DNA chip to discriminate whether the probes are hybridized with the target DNA. HPV DNA chip is designed to determine HPV gene-types by using DNA probes for 22 HPV types. In addition to the probes, the HPV DNA chip has markers that always react with the sample DNA. The positions of probe-dots in the final scanned image are fixed relative to the marker- dot locations with a small variation attributable to the accuracy of the dotter and the scanner. The probes are quadruplicated to enhance diagnostic fidelity. frier knowledge including the marker relative distance and the replication information of probes is integrated into the template matching technique with normalized covariance measure. It was demonstrated that the employment of both of the prior knowledges can be accomplished by simply averaging the template matching measures over the positions of the markers and probes. The resulting proposed scheme yields stable marker locating and probe classification.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.4 s.36
• /
• pp.355-364
• /
• 2005

An example of such a new device is a mobile phone. The demand for wireless data communication is growing rapidly. However, agencies have not yet completed the standardization of the markup language. Due to the evolution of the Mobile Device, the agencies in this field have provided different data formats with each Mobile Device Platform. Traditionally, contents are hand-tailored to suit the target devices. A key problem is that the characteristics and capabilities of mobile devices are too diverse to service the most suitable mobile contents. Owing to this problem, the need for a reusable document description language increases. In this paper, we defined Template file that is common data to service mobile devices. We proposed method that could be effective wireless web service though design and the implementation of the Call Manager & the XSL Generator. In the methodology, when requesting wireless internet service, the mobile device finds out Markup language and hardware specification of the mobile device through the Call Manager component supports. The XSL Generator component creates XSL file dynamically that is the most suitable to device. Finally, contents is serviced to each device by XSLT.

• Journal of Power System Engineering
• /
• v.19 no.2
• /
• pp.27-32
• /
• 2015

This paper describes a distance measurement system with high accuracy that utilizes a stereo-based camera and a pan-tilt unit for automatically maintaining the positional relationship between a vessel and a target on the side of a facility at a close range. The measurement system offers an advantage in that it can measure the distance to a target while tracking it. In order to improve the ability to control the position of a vessel between it and a target while maintaining the distance especially at a close range, the accuracy of the measurement system has to be improved. The accuracy of the distance measured by our system is increased with revisions of the conclusively generated data of distance measurement. We verified the accuracy of our system from an experiment, which generated results that had an accuracy of 30 mm for distances in the range between 2-8 m.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.273-273
• /
• 2013

Recently, Point-of-care (POC) testing microdevices enable to do the patient monitoring, drug screening, pathogen detection in the outside of hospital. Immunochromatographic strip (ICS) is one of the diagnostic technologies which are widely applied to POC detection. Relatively low cost, simplicity to use, easy interpretations of the diagnostic results and high stability under any circumstances are representative advantages of POC diagnosis. It would provide colorimetric results more conveniently, if the genetic analysis microsystem incorporates the ICS as a detector part. In this work, we develop a reverse transcriptase-polymerase chain reaction (RT-PCR) microfluidic device integrated with a ROSGENE strip for colorimetric influenza H1N1 virus detection. The integrated RT-PCR- ROSGENE device is consist of four functional units which are a pneumatic micropump for sample loading, 2 ${\mu}L$ volume RT-PCR chamber for target gene amplification, a resistance temperature detector (RTD) electrode for temperature control, and a ROSGENE strip for target gene detection. The device was fabricated by combining four layers: First wafer is for RTD microfabrication, the second wafer is for PCR chamber at the bottom and micropump channel on the top, the third is the monolithic PDMS, and the fourth is the manifold for micropump operation. The RT-PCR was performed with subtype specific forward and reverse primers which were labeled with Texas-red, serving as a fluorescent hapten. A biotin-dUTP was used to insert biotin moieties in the PCR amplicons, during the RT-PCR. The RT-PCR amplicons were loaded in the sample application area, and they were conjugated with Au NP-labeled hapten-antibody. The test band embedded with streptavidins captures the biotin labeled amplicons and we can see violet colorimetric signals if the target gene was amplified with the control line. The off-chip RT-PCR amplicons of the influenza H1N1 virus were analyzed with a ROSGENE strip in comparison with an agarose gel electrophoresis. The intensities of test line was proportional to the template quantity and the detection sensitivity of the strip was better than that of the agarose gel. The test band of the ROSGENE strip could be observed with only 10 copies of a RNA template by the naked eyes. For the on-chip RT-PCR-ROSGENE experiments, a RT-PCR cocktail was injected into the chamber from the inlet reservoir to the waste outlet by the micro-pump actuation. After filling without bubbles inside the chamber, a RT-PCR thermal cycling was executed for 2 hours with all the microvalves closed to isolate the PCR chamber. After thermal cycling, the RT-PCR product was delivered to the attached ROSGENE strip through the outlet reservoir. After dropping 40 ${\mu}L$ of an eluant buffer at the end of the strip, the violet test line was detected as a H1N1 virus indicator, while the negative experiment only revealed a control line and while the positive experiment a control and a test line was appeared.