• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 봄 학술발표회 논문집
• /
• pp.88-96
• /
• 1995

Seismic design provisions in Korea has developed based on seismic provisions in United States (e.g., ATC 3-06). Current seismic design provisions in U .S. is moving toward adopting enhanced concept for design. Federal Emergence Management Agency (FEMA) Provides the NEHRP recommended Provisions for the Development of Seismic Regulations for New Buildings which can be used as a source document for use by any interested members of the building community. Current seismic design provisions in U .S. generally use a uni-level force. These provisions can not be satisfied if the limit state design is concerned. Limit state can be defined as a state causing undesirable performance o( a structure (e .g., serviceability, ultimate, buckling, etc.). Even if there are provision for controlling drift by two levels, it is still difficult to satisfy limit states using uni-level force. Architectural Institute of Japan (AIJ) uses a hi-level forces Int seismic loadings which can satisfy serviceability and ultimate limit state. However, the seismic parameters used in AIJ guideline are basically determined by subjective manner of code committee member and professions. These parameters need to be determined based on target quantities (target reliability, target energy dissipation, target displacement, target stress level, etc.). This study develops the method to determine the sesmic design parameters based on a certain taget level. Reliability is used as a target level and load factors in ANSI/ASCE 7-88 are selected as design parameters to be determined.

• 한국경영과학회지
• /
• 제34권2호
• /
• pp.77-90
• /
• 2009

Total profit level Increases if a company increase the cost for achieving R&D related goals of equipment productivity enhancement, production cost saving, or for achieving equipment scale target, sales volume goal. But how much money should be invested to achieve a certain level of profit? We formulated the model to set the optimal goal levels to minimize the investment cost under the constraint that certain level of total profit should be guaranteed. This model derived from a case of P steel company. We found that this should be considered in relation with the production sales planning (known as optimal product mix problem) to guarantee the profit. We suggested a nonlinear programming model, 3 valiant form of the p+roduct mix problem. We can find the optimal Investment level for the R&D related goals or sales volume goal, equipment scale target for the P steel company using the model.

• 상하수도학회지
• /
• 제31권3호
• /
• pp.237-248
• /
• 2017

The estimation method of economical leakage management target utilized upon planning business for improvement of revenue water ratio in South Korea is presented and applicability of methods developed in this study is assessed through application on site. With a consideration of revenue water ratio in application target area, estimation method of long-term economical leakage management target is applied. Three leakage reduction methods such as replacement of residual aged pipe, leakage investigation and restoration and water pressure management are applied with a consideration of characteristics of site. Due to difficulty of obtaining data, analysis of cost/benefit by leakage reduction methods is performed by applying method of leakages estimation equation among statistical methods. As a result of application, revenue water ratio corresponding to long-term economical leakage management target is 91.6 %.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1996년도 추계학술대회발표논문집; 고려대학교, 서울; 26 Oct. 1996
• /
• pp.166-169
• /
• 1996

Well-evaluated quality of software can provide business proper decisions, increase productivity, and prevent financial loss or unnecessary burden of rework. Evaluation is important to ensure the chosen software conforming to organizational requirements, customer demands, and product integrity level. In this paper, we present a theoretical model with the structure of evaluation requirements to select the prioritized evaluation target input of software quality. Within limited time and budget, the prioritized target inputs of evaluation can be used to determine the appropriate evaluating step for each different category of requirements.

• 대한안전경영과학회지
• /
• 제11권1호
• /
• pp.205-211
• /
• 2009

In reality, distribution planning for a supply chain is established using a certain probabilistic distribution estimated by forecasting. However, in general, the demands used for an actual distribution planning are of deterministic value, a single value for each of periods. Because of this reason the final result of a planning has to be a single value for each period. Unfortunately, it is very difficult to estimate a single value due to the inherent uncertainty in the probabilistic distribution of customer demand. The issue addressed in this paper is the selection of single demand value among of the distributed demand estimations for a period to be used in the distribution planning. This paper proposes an efficient demand selection scheme for minimizing total inventory costs while satisfying target service level under the various experimental conditions.

• 한국물환경학회지
• /
• 제29권5호
• /
• pp.630-640
• /
• 2013

It is one of the most critical steps identifying impaired waterbodies exactly in the selection of target water quality indicators for the management of Total Maximum Daily Loads (TMDLs). Excess ratio and excess level were applied and analyzed by the stream zone basis in order to evaluate water impairment for Nakdong, Geum, Youngsan and Seomjin rivers. Each river basin was divided into stream zones in the light of its watershed and waterbody characteristics. Selected water quality parameters discussed in this study were pH, DO, BOD, COD, SS, T-P, T-Coli and F-Coli. The excess ratios of the water quality parameters were used to discriminate water bodies that did not meet water quality standards. The excess levels were used to classify the degradation of water quality. The excess ratios and the excess levels to the water quality criteria of the medium influence areas were used for each stream zone. The results indicate that the excess ratios and the excess levels are varied on the stream zone in each river basin. Three parameters, pH, DO and SS, met water quality standards in all stream zones. The other five parameters indicated very high excess ratios in most waterbodies, and especially T-P and T-Coli revealed to be very high excess levels in some waterbodies. These parameters could be considered as major target indicators for the management of TMDLs.

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.717-724
• /
• 2018

사회기반시설물의 노후화에 따른 교량 유지관리비용의 급격한 증가에 대비하기 위해서는 미래 발생 가능한 유지관리비용의 예측이 선행되어야 한다. 이를 위해 본 논문에서는 교량 관리주체의 유지관리 현황 분석을 통해 교량의 관리수준을 파악하고, 이를 생애주기에 따른 목표관리수준과 성능향상 한계 값으로 모델링하였다. 이와 함께 교량 안전점수에 따른 보수보강비용 예측모델, 성능열화모델, 평균개축비용단가, 평균 개축시기로 구성된 기존의 비용 및 성능 예측모델과 연계하여, 교량 유지관리비용 추계분석을 위한 방법론 및 절차를 제안하였다. 제안된 방법의 활용성 검증을 위해 특정 관리주체가 관리하는 교량의 규모, 노후화 정도, 현재 관리현황을 고려하여 미래 유지관리비용 추계 분석을 수행하였다. 연차별로 개별 교량 수준의 안전등급과 유지관리 조치에 따른 비용 추정 결과와 이들을 관리주체 수준으로 합산하여 연차별 평균 안전점수, 안전등급 구성비, 점검진단비용, 보수보강비용, 개축비용을 합리적으로 추정할 수 있다. 향후 목표성능관리수준의 변경에 따른 생애주기 예산의 변화를 추정하여 최적의 관리수준을 제안할 수 있을 것으로 판단된다.

• 한국정보통신학회논문지
• /
• 제11권12호
• /
• pp.2280-2286
• /
• 2007

정보시스템은 다양한 구성요소들을 포함하고 있으며, 이들 구성요소들은 몇 개의 유형으로 구분될 수 있다. 보안수준관리활동을 준비 할 때, 관리활동의 대상을 정의하는 것이 가장 중요하며, 이들 대상을 정의한 이후 보안수준 관리활동이 시작될 수 있다. 본 논문에서는 정보시스템을 몇 개의 부분으로 나눔으로써 관리대상을 정의하고, 이들 대상은 운영 환경과 특성에 따라 다양하게 관리될 수 있음을 보여준다.

• 전기학회논문지
• /
• 제58권4호
• /
• pp.671-678
• /
• 2009

This paper presents target operation voltage guidelines of each voltage control area considering both voltage stability and economical efficiency in real power system. EMS(Energy Management System) data, Real-time simulator, shows not only voltage level but lots of information about real power system. Also this paper performs optimal power flow calculation of three objective functions to propose the best target operation voltage. objective function of interchange power flow maximum and active power loss minimization stand for economical efficiency index and reactive power reserve maximum objective unction represents stability index. Then through simulation result using optimazation technique, the most effective objective function is chosen. To sum up, this paper divides voltage control area into twelve considering electric distance characteristics and estimate or voltage level by the passage of time of EMS peak data. And through optimization technique target operation voltage of each voltage control area is estimated and compare heir result. Then it is proposed that the best scenario to keep up voltage stability and maximize economical efficiency in real power system.

• 대한안전경영과학회지
• /
• 제13권1호
• /
• pp.31-39
• /
• 2011

In this study, supervision resides fire mission against problems associated with case studies and surveys done through the side of the field work, technical personnel, fire management, including fire code aspects classified into three kinds of items dealt with the issue. Started at the scene of the problem in terms of performance, the issue of the construction process, mainly dealt with the issue at the time of completion. Fire management side, supervisor of technical personnel, human resources management issues, contract issues, fire code level, the frequent revisions of fire regulations, supervision, processing delays of the resulting report, the problem resides with the expansion of Fire Supervision target was mentioned. Finally, the target for each hierarchical supervision, and resident supervisor of the need for supervision of work performance test was carried out by the correlation.