• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.414-414
• /
• 2010

KSTAR vacuum vessel has been boronized by carborane ($C_2B_{10}H_{12}$) to reduce various kinds of impurities including carbon and oxygen from the wall, since carborane is solid, non-toxic, non-explosive and is easily evaporated, while diborane ($B_2D_6$) is toxic and explosive. To find the best wall condition for the removal of contaminants before application to KSTAR, various amounts (0.3g, 0.5g, 1g) of carborane are tested in a test chamber, where filament discharge was generated in the mixture of helium and carborane with the same KSTAR target pressure (~ 5 mTorr) from base pressure (${\sim}10^-7\;Torr$). Discharge is performed by a pulse sequence mode with 3 second power on and 5 second power off. Deposited films of a-C/B:H are characterized by ellipsometery, AES and XPS, and are compared with those of KSTAR.

• Toxicological Research
• /
• v.25 no.1
• /
• pp.41-45
• /
• 2009

This study was conducted to monitor the level of bifenthrin residues in pear sprayed with 2% bifenthrin wettable powder (WP) at the recommended rate at four different schedules prior to harvest. The target analyte was extracted with acetone, partitioned into dichloromethane, and then purified by florisil chromatographic column. The residue determination was performed on a DB-5 capillary column using GC with electron capture detector (ECD). Linearity of this method was quite good ($r^2$ = 0.9951) in the concentration ranged from 0.2 mg/kg to 10 mg/kg. Recovery test was carried out at two concentration levels, 0.2 mg/kg and 1.0 mg/kg, in three replicates, and their rates were from 82.9% to 107.2%. No quantitative bifenthrin was detected in pear of all kinds of treatments including the treatment sprayed 4 times until 7 days before harvest. This sensitive and selective method can be used to monitor the trace residual amounts of bifenthrin in pear in a quite low concentration level.

• Journal of the Korean Magnetic Resonance Society
• /
• v.16 no.2
• /
• pp.147-161
• /
• 2012

Human melanocortin-4 receptor (hMC4R) among MC-Rs, expressed in the brain, is in charge of the control on energy homeostasis and food intake. The structure and function of human MC4R have been studied to understand their essential function and roles. To investigate the structure and function, it is necessary to prepare sufficient amounts of proteins. However, their expression and purification is demanding and time-consuming due to their innate insoluble and toxic properties. The heterozygous mutations of hMC4R, exchange of Asp 90 to Asn located in second transmembrane, cause severe obesity in human. To obtain purified hMC4R wt-TM2 for structural studies, it was first over-expressed and purified by fast protein liquid chromatography (FPLC) and then solution NMR studies were performed to get high-resolution spectra. In here, we established optimized purification scheme to get more purified target peptide.

• Archives of Pharmacal Research
• /
• v.20 no.6
• /
• pp.579-585
• /
• 1997

To gain further insight into the mechanism of action of antiestrogens, we examined the interaction of antiestrogen with the estrogen receptor system and with estrogen- noncompetable antiestrogen binding sites. In addition to binding directly to the estrogen receptor, antiestrogens can be found associated with binding sites that are distinct from the estrogen receptor. In contrast to the restriction of estrogen receptors to estrogen target cells, such as those of uterus and mammary glands, antiestrogen binding sites are present in equal amounts in estrogen receptor-positive and -negative human breast cancer cell lines, such as MCF-7, T47D, and MDA-MB-231 that differ markedly in their sensitivity to antiestrogens. In order to gain greater insight into the role of these antiestrogen binding sites in the action of antiestrogens, we have examined the biopotency of different antiestrogens for the antiestrogen binding sites and that is CI628 > tamoxifen > trans-hydroxy tamoxifen > CI628M > H1285 > LY117018. This order of affinities does not parallel the affinity of these compounds for the estrogen receptor nor the potency of these compounds as antiestrogens. Indeed, compounds with high affinity for the estrogen receptor and greatest antiestrogenic potency have low affinities for these antiestrogen binding sites. Antiestrogenic potency correlates best with estrogen receptor affinity and not with affinity for antiestrogen binding sites. In summary, our findings suggested that interaction with the estrogen receptor is most likely the mechanism through which antiestrogens evoke their growth inhibitory effects.

• Geomechanics and Engineering
• /
• v.18 no.5
• /
• pp.545-554
• /
• 2019

The customary approach used in the blast vibration analysis is to derive empirical relations between the peak particle velocities of blast-induced waves and the scaled distance, and to develop patterns limiting the amounts of explosives. During the periods when excavations involving blasting were performed at sites far from residential areas and infrastructure works, this method based on empirical correlations could be effective in reducing vibrations. However, blasting procedures applied by the fast-moving mining and construction industries today can be very close to, in particular cities, residential areas, pipelines, geothermal sites, etc., and this reveals the need to minimize blast vibrations not only by limiting the use of explosives, but also employing new scientific and technological methods. The conventional methodology in minimizing blast vibrations involves the steps of i) measuring by seismograph peak particle velocity induced by blasting, ii) defining ground transmission constants between the blasting area and the target station, iii) finding out the empirical relation involving the propagation of seismic waves, and iv) employing this relation to identify highest amount of explosive that may safely be fired at a time for blasting. This paper addresses practical difficulties during the implementation of this conventional method, particularly the defects and errors in data evaluation and analysis; illustrates the disadvantages of the method; emphasizes essential considerations in case the method is implemented; and finally discusses methods that would fit better to the conditions and demands of the present time compared to the conventional method that intrinsically hosts the abovementioned disadvantages.

• Journal of the Korea Concrete Institute
• /
• v.28 no.4
• /
• pp.435-444
• /
• 2016

In Korea, approximately 48% of all households live in apartments, which are a form of multi-unit dwellings, and this figure increases up to 58%, when row houses and multiplex houses are included. As such, majority of the population reside in multi-unit dwellings where they are exposed to the problem of floor impact noise that can cause disputes and conflicts. Accordingly, this study was conducted to manufacture a high-weight, high-stiffness foamed concrete in order to develop a technology to reduce the floor impact noise. For the purpose of deriving the optimum mixing ratio for the foamed concrete that best reduces the floor impact noise, the amounts of the foaming agent, lightweight aggregate and binder were varied accordingly. Also, the target characteristics of the concrete to be developed included density of over $0.7t/m^3$, compressive strength of over $2.0N/mm^2$ and thermal conductivity of under 0.19 W/mK. The results of the experiment showed that the fluidity was very excellent at over 190 mm, regardless of the type and input amount of foaming agent and lightweight aggregate. The density and compressive strength measurements showed that the target density and compressive strength were satisfied in the specimen with 50% foam mixing ratio for foamed concrete and in all of the mixtures for the lightweight aggregate foamed concrete. In addition, the thermal conductivity measurements showed that the target thermal conductivity was satisfied in all of the foamed concrete specimens, except for VS50, in the 25% replacement ratio case for Type A aggregate, and all of the mixtures for Type B aggregate.

• Korean Journal of Veterinary Service
• /
• v.35 no.3
• /
• pp.215-222
• /
• 2012

Species-specific $TaqMan^{(R)}$ probe-based real-time PCR assays were developed for detection of beef, pork, chicken, duck, goose and turkey. The primer and probe sets used in this study were designed to be complementary to fibroblast growth factor (FGF) for cattle and pig, mitochondrial NADH dehydrogenase (ND) subunit 3 and ND2 for chicken and duck, 12S rRNA for goose and turkey, respectively. As internal positive control we used conserved region in the ribosomal 18S RNA gene to ensure the accuracy of the detection of target DNA by real-time PCR. We confirmed that real-time PCR assays with the primer and probe sets were positive for cattle, pig and chicken intended target animal species with no cross-reactivity with other non-target animal species. Only >50 ng DNA of beef show cross-reactivity in the determination of duck. Using species-specific primer and probe sets, it was possible to detect amounts of 0.1 ng DNA of cattle and pig, 1.0 pg DNA of chicken, duck and turkey, and 0.1 pg DNA of goose for raw samples, respectively. The detection limits were 0.1 ng DNA of cattle, 1.0 ng DNA of pig and 1.0 pg DNA of chicken for DNA mixtures (beef, pork and chicken) extracted from heat-treated ($121^{\circ}C$/5 min) meat samples. In conclusion, it can be suggested that the $TaqMan^{(R)}$ probe-based assay developed in this study might be a rapid and specific method for the identification of meat species in raw or cooked meat products.

• Journal of Food Hygiene and Safety
• /
• v.29 no.2
• /
• pp.117-122
• /
• 2014

Rice can be the contaminating with soil-borne bacteria. Furthermore, the contaminated bacteria can be grown during immersion process for produce wet-milled rice flour. Therefore, disinfectants can be added during the immersion process. Antibacterial activities of the natural disinfectant, fermented rice spent water (FRSW), and the chemical disinfectants, chlorine dioxide (CD) and sodium benzoate (SB), were respectively determined when added in pure cultures of target bacteria such as Salmonella typhimurium, Escherichia coli, and Bacillus cereus or when added to immersion water in the immersion process. In addition, rinsing effects for removing bacteria were determined when rice was rinsed with water before and after the immersion process. Antibacterial activities were rapidly increased as increasing amounts of the disinfectants are added to the pure cultures of the target bacteria. Antibacterial activity of CD was the most effective among the three tested disinfectants when added to the pure cultures of the target bacteria, respectively. Those of the same disinfectants were increased when they were increasingly added to the immersion water. However those of the disinfectants were less effective when added to the immersion water. On the other hand, rinsing effects for removing bacteria were the most effective when rice was rinsed only with water without the immersion process. Collectively, rinsing rice with water only was more effective than using disinfectants in the immersion water during rice flour production.

• The Korean Journal of Pesticide Science
• /
• v.10 no.2
• /
• pp.76-83
• /
• 2006

In order to investigate the impacts of non-selective herbicide, glufosinate-ammonium (ammonium 4-[hydroxy(methyl)phosphinoyl] -DL-homoalaninate, GLA) to the non-target organisms, earthworm was exposed to GLA in the field soil for a month, and microbial populations in the soil were investigated after application of GLA. Simultaneously, the residues of GLA and its metabolite, 3-MPP were analyzed in the same soil. Meanwhile, to elucidate the influence of GLA to the growth of non-target crops incase of inter-furrow application, the amounts of carotenoid, chlorophyll, amino acid, proteins and sugars in the leaves of potato and chinese cabbage grown in the same field were investigated. In result, the dead earthworm was not observed during the test period, and the increasing rates of bodyweight were $9.410{\sim}11.603%$ in GLA-treated plots and 5.645% in GLA-untreated plots. The populations of fungi, bacteria and actinomycetes in the GLA-treated soils were $6.2{\times}10^4$, $1.5{\times}10^6$ and $5.7{\times}10^4$, respectively. They maintained relatively similar levels to the control which were $3.7{\times}10^4$, $3.7{\times}10^5$ and $3.7{\times}10^4$, respectively. In residue analysis, the limit of detection of GLA was 0.02 mg $kg^{-1}$, that of 3-MPP was the same level, and the half-life of GLA was 15 days in sandy clay loam soil. This result indicates that GLA was degraded very quickly in field soil. On the other hand, the amounts of physiological, biochemical components such as carotenoid, amino acid, chlorophyll, protein and sugar were ranged from 90.0 to 104.3% in potato and from 99.0 to 112.7% in chinese cabbage. Comparing with hand-weeded plots, it is indicated that GLA had not affected to the growth of non-target crops when applied at inter-furrow in crops-growing field.

• Spatial Information Research
• /
• v.23 no.6
• /
• pp.109-116
• /
• 2015

In this study, define the concept of spatial big data and special feature of spatial big data, examine information visualization methodology for increase the insight into the data. Also presented problems and solutions in the visualization process. Spatial big data is defined as a result of quantitative expansion from spatial information and qualitative expansion from big data. Characteristics of spatial big data id defined as 6V (Volume, Variety, Velocity, Value, Veracity, Visualization), As the utilization and service aspects of spatial big data at issue, visualization of spatial big data has received attention for provide insight into the spatial big data to improve the data value. Methods of information visualization is organized in a variety of ways through Matthias, Ben, information design textbook, etc, but visualization of the spatial big data will go through the process of organizing data in the target because of the vast amounts of raw data, need to extract information from data for want delivered to user. The extracted information is used efficient visual representation of the characteristic, The large amounts of data representing visually can not provide accurate information to user, need to data reduction methods such as filtering, sampling, data binning, clustering.