• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2004년도 춘계학술발표대회 논문집 제23권 1호
• /
• pp.379-384
• /
• 2004

체외 충격파 쇄석술 (ESWL)은 체외에서 발생된 충격파를 체내의 결석이 위치한 부위에 집속하여 결석을 분쇄하는 비 침습적인 치료술이다. 최근 충격파를 이용하여 근관절 질환을 치료하는 체외 충격 파 치료술 (ESWT)이 또한 임상적으로 주목을 받고 있다. 아직 ESWT를 위한 최적의 충격파 노출 조건은 알려져 있지 않지만, 일반적으로 ESWL에 비해 상대적으로 충격파장의 초점 영역이 넓고 낮은 강도의 충격파를 사용한다. 본 연구에서는 ESWT에 적합할 것으로 예상되는 테이퍼 원통형 충격파 발생 방식을 제안하고자 한다. 본 연구에서는 테이퍼 원통형 충격 파 발생 의 초점 부위의 파형을 수치 해석하여 평가하고, 기존 원통형의 경우와 비교하였다. 테이퍼 원통형 충격파 발생기의 시제품을 제작하고, 발생된 강도를 평가하기 위해, 모의 결석을 제작하여 분쇄 효율을 측정하였으며, 결과를 원통형 충격파 발생기와 비교하였다.

• 한국안전학회지
• /
• 제23권2호
• /
• pp.14-20
• /
• 2008

The objective of this study is to examine fatigue strength of the welded details. In order to attain the goal of this study, the bending fatigue tests was performed for four kinds of welded details used in steel bridges, such as in-plane gusset, out-of-plane gusset, cruciform, and cover plate. The effect of the length of welded attachment on fatigue strength was greater in out-of-plane gusset than in in-plane gusset. The fatigue strength of welded details with short attachment was superior to that with long attachment. Fatigue strength of welded details with transversely loaded welds was lower than that with longitudinally loaded welds, and those results were not satisfied with AASHTO specifications. For the fatigue strength of cover plate, cover plate with rectangular section was superior to that with tapered section. It was found that the fatigue crack initiates at the points of stress concentration which are the boundary between the base metal and the bead of weld in the part of the longitudinal edge of attachment, and propagates first along the boundary and along the perpendicular to the direction of the principle stress in the base metal of welded tip.

• 복합신소재구조학회 논문집
• /
• 제6권3호
• /
• pp.77-85
• /
• 2015

In this paper, we present the result of investigations pertaining to the elastic buckling of simply supported columns with various cross-sectional dimensions but the same length and volume. In the investigations the accuracy of the analysis methods is studied and it was found that the result obtained by the successive approximations technique is the most accurate. In addition, the elastic buckling loads of columns with variable cross-section dimensions are obtained by the theoretical and numerical methods. From the results, it was found that the buckling loads obtained by the numerical methods are close to the buckling loads obtained by the successive approximations technique for the practical standpoints. Moreover, the buckling load of column with convexity in its middle is the highest while the buckling load of the tapered column is the lowest as expected.

• 한국정밀공학회지
• /
• 제31권1호
• /
• pp.59-66
• /
• 2014

The central seam, the vertical 'line' between doors, in the front view of a refrigerator must have its gap and flush within certain ranges to meet functional and aesthetic requirements. The conventional criteria for gap and flush control in the industry are to keep the gap and flush within certain ranges at each of various points along the seam. For aesthetics, however, the uniformity of the gap is also as important because a 'tapered' seam is negatively perceived by human eyes. This paper shows a case study of tolerance design for a refrigerator door system. It presents a step-by-step procedure, which consists of datum flow chain analysis, identification of assembly features, computer modeling of feature tolerances, assembly operations and measurements, tolerance simulation, and tolerance adjustments based on the simulation results. It is found that extra care may need to be used to satisfy the aesthetical criterion for gap uniformity.

• 대한토목학회논문집
• /
• 제12권1호
• /
• pp.43-50
• /
• 1992

본(本) 연구의 목적(目的)은 평면응력/변형과 축대칭 및 쉘문제를 포함하는 다양한 응용문제에서 계층적(階層的) 성질을 갖는 적분형 르장드르 형상함수에 의한 P-version 모델의 통용성(通用性)을 확인하는 것이다. 현대 유한요소 해석에서 정확도를 확보하지 못하는 가장 큰 이유는 비(非)압축성 재료와 망목(網目)설계시 요소의 형상비(形狀比), 사다리꼴 요소에서 변(邊)의 감소비(減少比)와 평행사변형 요소의 왜곡도(歪曲度) 등을 갖는 불규칙 형상에서 나타나는 가상메카니즘과 Locking 현상이다. 조건수(條件數)와 에너지 노름이 계산오차, 수렴성 및 알고리즘의 효율성을 검증하는데 사용되었으며 해석결과는 NASTRAN과 SAP90 및 Cheung이 제안한 Hybrid 요소와 비교되었다. NASTRAN을 제외한 SAP90 및 P-version 프로그램은 16 Bit 소형컴퓨터에 의해 실행되었다.

• Composites Research
• /
• 제14권6호
• /
• pp.32-37
• /
• 2001

광섬유 센서의 복굴절 현상을 방지하기 위해 리코팅이나 유리 튜브를 이용하여 보호하는 방법이 있다. 하지만, 이와 같은 처리를 하였을 경우 센서의 변형률 전달성에 대한 검증이 아직 이루어지지 알았다. 본 연구에서는 세가지 형태(재킷이 벗겨진, 리코팅을 한, 유리 튜브로 보호한)의 광섬유 브래그 격자 센서를 제작하여 그라파이트/에폭시 복합재료 적층시편의 인장 실험을 통해 변형률 전달성을 검증하였다. 광섬유 센서는 삽입 적용하였고 표면에 부탁한 변형률 게이지와 값을 비교하였다. 그리고 변형률 구배가 존재하는 경사진 알루미늄 시편의 인장 실험을 통해 각 센서의 신호 특성을 비교하였다.

• Childhood Kidney Diseases
• /
• 제21권2호
• /
• pp.160-164
• /
• 2017

C3 glomerulopathy (C3G) is a recently defined pathological entity characterized by C3 accumulation with absent or scant immunoglobulin deposition, leading to variable glomerular inflammation. The clinical presentation of patients with C3G is highly variable, as they may present with symptoms ranging from microscopic or mild proteinuria to full-blown nephrotic syndrome, with or without renal impairment. However, there is no consensus recommendation for specific treatment in children with C3G. Recently, new therapies have been suggested to target complement pathways, owing to an improvement in the understanding of the pathogenesis of C3G. C3G complement blockade with eculizumab, a monoclonal antibody targeted against complement C5, inhibits activation of the alternative complement pathway. We could not use eculizumab owing to its high price; thus, we administered oral prednisolone and mycophenolate mofetil (MMF). MMF was replaced with cyclosporine because proteinuria persisted, with a consistently low serum C3 level; we tapered off the prednisolone because of a Cushingoid appearance and amenorrhea. Thereafter, proteinuria improved, and the serum C3 level returned to normal. Thus, we report the effectiveness of cyclosporine in a patient with C3G and an inadequate response to prednisolone and MMF, who was detected via school urinary screening.

• Animal Systematics, Evolution and Diversity
• /
• 제28권1호
• /
• pp.29-35
• /
• 2012

Two Spirostomum species collected from freshwater in Korea were identified as S. caudatum (Muller, 1786) and S. teres (Claparede and Lachmann, 1858). They are recorded for the first time in Korea. The description was based on the observation of living specimens and protargol impregnated specimens. Diagnostics of these species are as follows. Spirostomum caudatum: body size $400-450{\times}20-30\;{\mu}m$ in vivo, shaped long and slender with a tapered posterior part, highly contractile; macronucleus ellipsoid; adoral zone of membranelles occupied 30% of body length; somatic kineties 14-22 in number. Spirostomum teres: body size $240-460{\times}25-40\;{\mu}m$ in vivo, shaped long and slender with a flattened posterior end, highly contractile; cortical granules arranged in 2-3 rows; adoral zone of membranelles occupied 50% of body length; somatic kineties 20-30 in number; macronucleus ellipsoid; micronuclei 2-3 in number. Spirostomum caudatum and S. teres are the most similar congeners, but they are different in the posterior part of body (tail-like posterior part vs. flattened posterior end), length of adoral zone of membranelles in body length (1/3 vs. 1/2), and the number of somatic kineties (14-22 vs. 20-30). These populations match with European populations in morphological characters.

• Animal Systematics, Evolution and Diversity
• /
• 제36권2호
• /
• pp.123-127
• /
• 2020

This paper reports four species of Erebidae from the southern part of Korea: two Boletobiinae, Honeyania ragusana (Freyer, 1845), Enispa masuii Sugi, 1982, one Hermininae, Adrapsa ablualis Walker, 1859, and one Arctiinae, Stictane rectilinea (Snellen, 1879). Honeyania ragusana can be distinguished by the following: a blackish dot on the apex of the forewing with strongly curved medial lines, a long slender uncus and a strongly distally bifurcated valva with a large distally expanded costa and a thumb-shaped process of sacculus on the male genitalia as well as a sclerotized antrum, strongly tapered ductus bursae, and large corpus bursae on the female genitalia. Enispa masuii, a lichen feeder, can be distinguished by the whitish medial lines of the grayish fore- and hindwings, and a pair of rounded ball-shaped lamella antevaginalis, long, sclerotized ductus bursae, and pear-shaped corpus bursae without signum of the female genitalia. Adrapsa ablualis can be distinguished by the whitish medial lines of the fore- and hindwings and large medial process of the costa and dentate distal margin of the valva of the male genitalia. Stictane rectilinea can be distinguished by the broad dark grayish medial band of the forewing and the long knife-shaped valva with a strongly hooked process on the distal part of the sacculus of the male genitalia.

• Tribology and Lubricants
• /
• 제32권1호
• /
• pp.18-23
• /
• 2016

The effective case depth for case-hardened rolling bearing has been discussed. For this purpose, rolling contact fatigue tests for ball bearings built with inner race of various hardness values were conducted until L₁₀ calculating rating life using a bearing life test machine under radial loading. Then, the distribution of residual stress below the inner raceway, which depended on the hardness value, was measured by X-ray diffraction. As a result, the linear relationship was established between the hardness value of the inner race and the theoretical shear stress evaluated at the depth where the residual stress disappeared below the inner raceway. Based on the relationship, it could be found that the factor of safety in bearing manufacturer’s rules for the effective case depth of case hardened rolling bearings was set higher. However, it could be also found that the hardness values at the depth where the maximum shearing stress acted below the raceway surface in a tapered roller bearing hardened by the carburizing process, were not sufficient for preventing plastic deformation under the basic dynamic load rating. Consequently, further efforts were still required to reduce or to disperse the contact load on the material design of a rolling bearing in order to prolong its life.