• 한국수자원학회논문집
• /
• 제42권10호
• /
• pp.809-824
• /
• 2009

한정된 기간의 짧은 유출량 기록을 갖는 댐 유역에서의 수자원 시스템 거동예측은 수문학적 지속성여부에 대한 판단이 선행 되어야 하며 가용한 시계열자료에 대한 추계학적 분석을 통하여 실시하여야 한다. 본 연구에서는 계절형 ARIMA모형을 통하여 안동댐 유역의 강우량, 증발량 및 유출량 시계열자료로 월별 수문시스템 거동을 예측하였으며, 예측된 결과를 토대로 TANK모형과 ARIMA+TANK결합모형에 의한 장기유출모의를 실시하였다. 분석결과 관측자료의 특성을 비교적 잘 반영 하였으며, 댐 유입량 예측을 위한 추계학적 결합모형의 적용가능성을 검토하였다. 이는 상대적으로 유출량자료의 보유년한이 짧은 대상유역의 시계열 수문인자 예측을 통한 유출모의의 적용으로 수자원의 중 장기 전략수립에 도움이 되리라 사료된다.

• International Journal of Ocean System Engineering
• /
• 제1권1호
• /
• pp.32-36
• /
• 2011

EG/AD/S type model ice was originally selected as the primary model ice material for the MOERI ice tank in Korea. The existence of a sugar component in the EG/AD/S mixture may cause a serious maintenance problem. In order to understand the influence of sugar in the original model ice, a series of tests with EG/AD/S and EG/AD model ices were performed, and their material properties compared. Because the target strength of model ice in the full-scale MOERI ice tank is expensive and difficult to control, tests were performed under cold room conditions using a miniature ice tank. This paper describes the material properties of EG/AD/S and EG/AD model ices, such as flexural strength, compressive strength and elastic modulus. In order to obtain the desired strength and stiffness levels for the model ice, a warm-up process was introduced.

• 한국수자원학회논문집
• /
• 제32권3호
• /
• pp.265-279
• /
• 1999

본 연구에서는, Markov 연쇄 모형에 의해 산정된 모의 일 강우량을 일 유출모형인 Tand 모형에 입력시켜 모의 일유출량을 산정함으로써 저수유량계열을 확장하는 방법을 개발하였다. 또한, 모의된 일 유량계열로부터 지속기간별 연 최저치 계열을 작성하였으며, 지속기간별 연 최저치계열에 대한 빈도분석을 시행하였다. 분석에 사용된 분포형은 Lognormal-2, Lognormal-3, Gamma-2, Gamma-3, LogGamma-3, Gumbel-2, Weibull-2 분포이었으며, 모수추정은 모멘트법과 최우도법을 사용하였다. Kolmogorov - Sminorv 검정방법으로 지속기간별 연 최저치 계열에 적합한 확률분포형을 결정하고, 용담댐 지점을 대상으로 하여 지속기간별 갈수 빈도곡선을 산정하였다. 본 연구에서 제안된 방법을 적용하면 과거 저수 유량계열의 통계적 특성을 잘 나타내는 일 유량의 모의가 가능 하여, 갈수유량계열 자료가 빈곤한 유역에서 확률 갈수량을 추정하는데 유용하리라고 판단된다.

• Journal of Ship and Ocean Technology
• /
• 제7권1호
• /
• pp.29-35
• /
• 2003

Intensive experimental investigation has been conducted on the characteristics of model tank with intruded flow. The remaining flow inside tank contribute to the dynamic behavior and further closely related to the stability of vessel as well. To understand the importance of the trapped flow and its dynamic effects a series of systematic tests were conducted using a bench tester that could generate periodic roll motion and also complex motions of combined roll-heave-sway. To accommodate experimental conditions and to create three degree freedom of motions, a bench tester was fabricated and verified. Having similarities in terms of flow trapped inside tank, theoretical approaches for A.R.T. were applied to the study. The major parameters including roll angle, period and flow height were varied in the experiments to obtain the characteristics of model tank.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권1호
• /
• pp.114-125
• /
• 2017

This paper addresses a study of inner-tank sloshing effect on motion responses of a Floating Liquefied Natural Gas (FLNG) system, through experimental analysis and numerical modeling. To investigate hydrodynamic characteristics of FLNG under the conditions of with and without LNG-tank sloshing, a series of numerical simulations were carried out using potential flow solver SESAM. To validate the numerical simulations, model tests on the FLNG system was conducted in both liquid and solid ballast conditions with 75% tank filling level in height. Good correlations were observed between the measured and predicted results, proving the feasibility of the numerical modeling technique. On the verified numerical model, Response Amplitude Operators (RAOs) of the FLNG with 25% and 50% tank filling levels were calculated in six degrees of freedom. The influence of tank sloshing with varying tank filling levels on the RAOs has been presented and analyzed. The results showed that LNG-tank sloshing has a noticeable impact on the roll motion response of the FLNG and a moderate tank filling level is less helpful in reducing the roll motion response.

• 대한조선학회논문집
• /
• 제40권4호
• /
• pp.37-45
• /
• 2003

Model tests using 2.0m model of the series 60 form( $C_{b}$= 0.6) were carried out in the Circulating Water Channel (CWC) in the Chosun University (CU, Korea) for the purpose of a correlative study with Towing Tank (TT). Resistance, propeller open water, self propulsion and wake survey tests were carried out and the results were extrapolated to the ship scale. These results were compared with the extrapolated ship values based on the model test of 7.0m model in the TT at the Korea Research Institute of Ships and Ocean Engineering (KRISO, Korea). The CWC test results were correlated with the results of the towing tank tests.s.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.70-75
• /
• 2003

Model tests using 2.0m model of the series 60 form ($C_{b}$ = 0.6) were carried out in the Circulating Water Channel(CWC) in the Chosun University(CU, Korea) for the purpose of a correlative study with Towing Tank(TT). Resistance, propeller open water, self propulsion, and wake survey tests were carried out and the results were extrapolated to the ship scale. These results were compared with the extrapolated ship values based on the model test of 7.0m model in the TT at the Korea Research Institute of Ships and Ocean Engineering (KRISO, Korea). The CWC test results were correlated with the results of the towing tank tests.

• 한국농공학회지
• /
• 제36권4호
• /
• pp.95-102
• /
• 1994

The series of the papers consist of three parts to describe the development, calibration, and applications of the flood forecasting models for the Youngsan Estuarine Dam located at the mouth of the Youngsan river. And this paper discusses the hydrologic model for inflow simulation at Naju station, which constitutes 64 percent of the drainage basin of 3521 .6km$^2$ in area. A simplified TANK model was formulated to simulate hourly runoff from rainfall And the model parameters were optirnized using historical storm data, and validated with the records. The results of this paper were summarized as follows. 1. The simplified TANK model was formulated to conceptualize the hourly rainfall-run-off relationships at a watershed with four tanks in series having five runoff outlets. The runoff from each outlet was assumed to be proportional to the storage exceeding a threshold value. And each tank was linked with a drainage hole from the upper one. 2. Fifteen storm events from four year records from 1984 to 1987 were selected for this study. They varied from 81 to 289rn'm The watershed averaged, hourly rainfall data were determined from those at fifteen raingaging stations using a Thiessen method. Some missing and unrealistic records at a few stations were estimated or replaced with the values determined using a reciprocal distance square method from abjacent ones. 3. An univariate scheme was adopted to calibrate the model parameters using historical records. Some of the calibrated parameters were statistically related to antecedent precipitation. And the model simulated the streamflow close to the observed, with the mean coefficient of determination of 0.94 for all storm events. 4. The simulated streamflow were in good agreement with the historical records for ungaged condition simulation runs. The mean coefficient of determination for the runs was 0.93, nearly the same as calibration runs. This may indicates that the model performs very well in flood forecasting situations for the watershed.

• 대한조선학회논문집
• /
• 제50권6호
• /
• pp.390-398
• /
• 2013

In this paper, an experimental study on sloshing problems in an independent B-type tank of STX Offshore and Shipbuilding Co. is described. Recently STX Offshore and Shipbuilding Co. introduced a new design of an independent B-type tank in order to reduce sloshing impact loads on LNG CCS. This tank has many internal members, so that sloshing flow and the resultant hydrodynamic loads are very different from those in typical membrane tanks. In this study, a series of sloshing experiment have been carried out for 1/50 scale model, and the main characteristics of sloshing load on the independent tank are observed. The properly scaled internal members such as swash bulkhead, center bulkhead and stringers have been installed in the test tank model, but sloshing pressures are measured on the tank walls only. The forced excitation signals have been generated by using the predicted ship motion in irregular sea states. The characteristics of sloshing loads on this tank have been observed in different filling levels with various heading angles, and sea states. In this paper, some key findings from the model tests are discussed.

• 대한조선학회논문집
• /
• 제40권1호
• /
• pp.1-7
• /
• 2003

The effect of the passive anti-rolling tanks(ART) decreases when the roll period of the vessel does not match the designed oscillating period of the fluid in the tank. In order to improve the effect of the passive ART, the damping plates are installed in the lower duct of the ART to adjust the oscillating period of the fluid. The effects of the damping plates on the oscillating period of the fluid and the changes of the stabilizing moments are examined through the series of bench tests. Acryl model tank larger than 1m breadth is made to minimize the viscous effect of the tank and the stabilizing moments of the tank are measured for various roll angles. Using the obtained tank damping coefficient, RAO(Response Amplitude Operator) value in the resonance range is computed and the stabilizing effect of a ART has been estimated.