• 한국항공운항학회지
• /
• 제25권4호
• /
• pp.130-140
• /
• 2017

Lightning protective design of an aircraft fuel system is closely related to the safety of the flight. Recently, composite material in building an aircraft becomes more important because it can reduce the weight of the aircraft. The composite materials decrease the protection against the effect of lightning. Lightning protective design of metal material aircraft has been researched for a long time and the design technique has been announced widely. However, research on the lightning protective design using composite material aircraft is very limited. In this study, lightning protective design for fuel tank structural component, access cover, fuel filler cap and drain valve in carbon fiber composite material aircraft have been presented. To show the compliance with FAA airworthiness standard regarding the presented protection designs, three steps, including lightning strike analysis, lightning environment analysis and certification test, were conducted in accordance with FAA AC 20-53.

• 한국정밀공학회지
• /
• 제18권6호
• /
• pp.121-126
• /
• 2001

Currently, potentiometric method has been employed to measure fuel amount for automobile. However, potentiometer could be malfunctioned or damaged due to the additives or dirt in fuel because a variable electric resistor is immersed in fuel. Therefore, a device employing strain sensor is designed and tested to verify the possibility as an alternative of the conventional fuel sender. Existing fuel tank has irregular cross section. Therefore, buoyancy is not increased linearly as fuel amount is increased. We design a floater that can compensate the irregular cross section of fuel tank and make buoyancy to increase linearly with increasing fuel amount. New fuel sender, comprising of strain gages on circular membrane, the above commented floater and the cover to prevent the disturbance due to sudden acceleration and deceleration, is designed and tested to replace current fuel sender. On the other hand, we are developing strain sensor that has strain gage deposited directly on the circular membrane with cantilever beam.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.909-911
• /
• 2003

The almost pole transformers are constructed with tank, cover, clamp etc., that contains the insulation oil, core, coil, terminals, bus and the other accessories. If some fault current will be flown by some trouble or accident, interior pressure of the transformer shall be very quickly rise, and mechanical components or insulation oil from the transformer enclosure shall be propelled or dropped from the tank. For the prevention of the above accident, recently the pole transformers should be done 'the Design Tests for Fault Current Capability' according to ANSI C57.12.20(1997) There are two tests method in this standard, Test Number I with a high current arcing fault, without internal fusible elements, shall be conducted on rack enclosure with its minimum designed air space. Test Number II with an internal fusible element, shall be conducted on each enclosure diameter utilizing the internal fusible elements. KEPCO recently request to be done the 'Design Tests for Fault Current Capability' for pole transformers according to KEPCO's standard ES141-$533{\sim}545$, PS141-$482{\sim}518$ and RS141-$611{\sim}628$ that is same with Test Number I of ANSI C57.12.20.

• 문화기술의 융합
• /
• 제5권4호
• /
• pp.87-92
• /
• 2019

이 연구는 공설소화전에 대한 지상식 및 지하식 소화전의 소방용수 사용 준비시간을 분석하였다. 1단계인 장비 준비시간은 지상식은 20.50초, 지하식은 24.67로 나타났다. 이와 같이 준비시간이 다소 차이가 난 것은 지하식 소화전은 맨홀 뚜껑을 개방하는 빠루와 지하식 소화전 본체 관구에 연결하기 위하여 스탠드 파이프가 추가로 필요했기 때문이다. 2단계인 물탱크차의 보수구에 숫커플링의 수관결합은 지상식은 48.50초, 지하식은 49.00초로 비슷하게 나타났다. 이것은 물탱크차 보수구에 소방호스를 연결하는 동작이 같기 때문이다. 3단계인 본체 관구에 수관 결합은 지상식은 43초, 지하식은 174.33초로 나타났는데 이와 같이 수관을 소화전 관구에 연결하는 시간이 큰 차이가 난 것은 지하식 소화전은 맨홀 뚜껑을 개방한 후 소화전 본체 관구에 스텐드 파이프를 연결한 후에, 스텐드 파이프 관구에 수관을 결합하는 추가 과정이 필요하여 소요시간을 크게 올린 것으로 판단된다. 4단계인 제수 밸브와 스핀들 개방은 지상식은 66.50초, 지하식은 78.83초 소요되었다. 이 같은 차이가 난 것은 지상식 소화전의 스핀들은 본체 관구위에 위치하여 쉽게 개방이 가능하지만, 지하식은 맨홀 아래 관구 옆에 위치하여 개방 장비인 복스퍼너를 연결하는 추가시간이 필요하여 나타난 결과로 판단된다.

• 대한기계학회논문집A
• /
• 제33권11호
• /
• pp.1274-1278
• /
• 2009

Fracture characteristics for plate and dome shapes of glass filled ceramics using shock tube were carried out. Glass filled ceramics have been considered as a promising candidate material for the dome port cover of air breathing engine. This part of the air breathing engine has an important role as separated membrane between combustion and external air, and needs the frangible characteristics that the particles of fractured glass filled ceramics should not affect the internal components of combustion. The objectives of this study are to evaluate the fracture pressures for various thicknesses and diameters of shock impact area. Also fracture phenomena of separated membrane using a shock tube compare with analytical method. The experimental apparatus consists of a driver, a driven section and a dump tank. The used material is glass filled ceramic made from Corning company. Specimens have the thickness of 3, 4.5 and 6mm. It is expected that the results obtained from this study can be used in the basic data for the dome port cover design of an air breathing engine.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.338-343
• /
• 2008

Fracture characteristics of plates and dome shapes for machinable glass ceramics using compressed shock wave. Machinable glass ceramics have been considered as a promising candidate material for the dome port cover of air breathing engine. This part of the air breathing engine has an important role separating solid and liquid fuel, and needs the frangible characteristics whereby the fracture of a part should not affect the internal components of combustion. The objective of this study are to evaluate the fracture pressure and phenomena of separated membrane using a shock tunnel. The experimental apparatus consists of driver, a driven section and a dump tank. The used material is machinable glass ceramic from Corning company. Specimens are used 3, 4.5 and 6mm thickness with plates and dome shapes. It is expected that the results obtained from this study can be used in the basic data for the dome port cover design of an air breathing engine.

• 대한조선학회논문집
• /
• 제48권5호
• /
• pp.390-395
• /
• 2011

The main purpose of ice model basin is to assess and evaluate the performance of the Arctic ships and offshore structures because the full-scale tests in ice covered sea are usually very expensive and difficult. There are various ice conditions, such as level ice, brash ice, pack ice and ice ridge, in the real sea. To estimate their capacities in ice tank accurately, an appropriate model ice sheet and prepared ice conditions copied from actual sea ice conditions are needed. Pack ice is a floating ice that has been driven together into a single mass and a mixture of ice fragments of varying size and age that are squeezed together and cover the sea surface with little or no open water. So Ice-class vessels and Icebreaker are usually operated in pack ice conditions for the long time of her voyage. The most ice model tests include the pack ice test with the change of pack ice concentration. In this paper, the effect of pack ice size and channel breadth in pack ice model test is conducted and analyzed. Also we presented some techniques for the calculation of pack ice concentration in the model test. Finally, we developed a new model test methodology of pack ice condition in square type ice tank.

• International Journal of Control, Automation, and Systems
• /
• 제4권6호
• /
• pp.669-681
• /
• 2006

In this work, a new method of design adaptive controllers for SISO systems based on multiple models and switching is presented. The controller selects the model from a given set, according to a switching rule based on output prediction errors. The goal is to design, at each sample instant, a predictive control law that ensures the robust stability of the closed-loop system and achieves the best performance for the current operating point. At each sample the proposed control scheme identifies a set of linear models that best characterizes the dynamics of the current operating region. Then, it carries out an automatic reconfiguration of the controller to achieve the best possible performance whilst providing a guarantee of robust closed-loop stability. The results are illustrated by simulations a nonlinear continuous and stirred tank reactor.

• 한국기계연구소 소보
• /
• 통권17호
• /
• pp.133-144
• /
• 1987

Since the towing tank was operated from early 1979, the test and analysis methods have been established and applied for the performance prediction of ships. Especially the analysis programs for the resistance test ('EHP') and self-propulsion test ('DHP') based on the 1978 ITTC performance prediction method was modified as a name of 'PPTT' in order to include the form factor calculation, two-dimensional analysis method, the prediction on multi-screw ship and the organization of data filing system. Recently the program 'PPTT' was improved to cover the procedure of data fairing, the analysis of propeller-open-water test results carried out at low and high Reynolds numbers, etc. This paper describes the newly improved analysis program 'PTI'.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 논문집 센서 박막재료연구회 및 광주 전남지부
• /
• pp.115-118
• /
• 2008

A field-oriented UHF system for on-line PD monitoring of transformers. is designed, which has been installed inside the oil tank of a transformer by two ways: on-line installing mode through the oil-valve and pre-installing mode through the man hole/hand hole cover. This system has successfully captured long intermittent discharge signals that hadn't been detected through conventional techniques, and solved the problem successfully. The results demonstrate that UHF technique has great advantages for on-line PD monitoring of transformers. By adopting the peak detection technique, it becomes easy and effective for the transplantation of the phase-resolved pattern recognition technique from conventional method to UHF method, and then to realize continuous on-line monitoring, source characterization and trending analysis.