• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.319-322
• /
• 2006

The flow characteristics around a floating cylinder in a swirling flow field in a vertical pipe with a length of 600mm and an inner diameter of 100mm is investigated by the use of the Stereoscopic-PIV system. The measurement system consists of two cameras, a Nd-Yag laser and a host computer. Optical sensors(LEDs) were used to detect the location of the floating cylinder and to activate the Stereoscopic-PIV system. A conditional sampling Stereoscopic-PIV system was developed in which the flow fields around the floating cylinder are measured at the events of the activations. It has been verified that the motion of the floating cylinder becomes stable when the azimuthal velocity component of the swirl flow is maintained at stable states.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.121-124
• /
• 1999

Subspace-based state space system identification (4SID) methods have been demonstrated to per-form well in a number of applications, but the properties of these have not been fully analyzed or understood yet. For applying the methods, no assumptions on structure of realization are needed and any coordinate transformation is allowed for the estimates. This is one reason why many kinds of properties expected for identification procedures have not been clarified yet. We illustrate, by using Schur complement, an interpretation of the R matrix yielded by the QR factorization in the 4SID procedure. The results in this paper can be useful for analysis of properties of parameters obtained by 4SID methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.525-525
• /
• 2000

In this paper, we present recursive algorithms for state space model identification using subspace extraction via Schur complement. It is shown that an estimate of the extended observability matrix can be obtained by subspace extraction via Schur complement. A relationship between the least squares residual and the Schur complement matrix obtained from input-output data is shown, and the recursive algorithms for the subspace-based state-space model identification (4SID) methods are developed. We also proposed the above algorithm for an instrumental variable (IV) based 4SID method. Finally, a numerical example of the application of the algorithms is illustrated.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.5
• /
• pp.424-429
• /
• 1996

Thin films of Ti-Ni alloy were formed by sputtering under various Ar gas pressures and r. f. powers to investigate the optimum sputtering conditions and to demonstrate their shape memory effect. The composition and structure of the films were examined by electron micro-probe analysis and scanning electron microscope. These films were annealed in order to crystallize them. The mechanical property of the annealed films was evaluated by a conventional bending test. The transformation tmeperatures were determined by differential scanning calorimetry. The shape memory behaviour was examined quantiatatively by changing in sample temperature under various constant loads. It was found that the Ar gas pressure had a critical effect on the mechanical property of the thin film,s although the r.f. power also affected it. The films formed at a high Ar gas pressure were too brittle to be bent successfully. However, the films formed at a low Ar gas pressur could be bent and their shape memory behavior was found to be comparable with that of bulk Ti-Ni alloys.

• Journal of Oral Medicine and Pain
• /
• v.10 no.1
• /
• pp.113-124
• /
• 1985

In order to observe the effect of mandibular orthopedic repositioning appliance (MORA) on body strength, the author measured back muscle strength with Digital Back Muscle DYNAMOMETER (TAKEI KIKI KOGYO Co., Tokyo, Japan) before MORA, 15 days after and 30 days after MORA in 12 men and then analysed them statistically. The subjects were weight-lifting athletes of Seoul Athletic High School without dysfunction of masticatory system. MORA was fabricated at 1.0-1.5rnm isotonically closed position (Myocentric Occlusion Position) from mandibular rest position (Myocentric Rest Position) using Myo-monitor (MyoTronics Research Inc., Seattle, Washington, USA) and-SVT C-II (Tokyo Shizaisha Inc., Tokyo, Japan). The results were as follows : 1. The mean of back muscle strength before MORA was 150 kg, that of 15 days after MORA was 165 kg (4.43% increase than before), and that of 30 days was 175 kg (10.76% increase than before). 2. There was a significant difference among back muscle strength before MORA, 15 days after and 30 days after MORA (P<0.01: repeated measures one-way ANOVA). 3. According to the result of determining mandibular position for MORA fabrication, mandibular rest position after relaxation with Myo-monitor was 3.2mm lower, 1.0mm posterior, and 0.5 mm left from centric occlusion. And the mean of the amount of lateral deviation was 0.7 mm.

• Journal of Korean Neurosurgical Society
• /
• v.48 no.1
• /
• pp.88-90
• /
• 2010

Retroperitoneal hematoma (RH) due to radiologic intervention for an intracranial lesion is relatively rare, difficult to diagnose, and can be lifethreatening. We report a case of RH that developed in a patient on anticoagulant therapy following endovascular coiling of a ruptured anterior communicating artery (AcoA) aneurysm. An 82-year-old man presented with a 12-day history of headache. Computed tomography (CT) on admission demonstrated slight subarachnoid hemorrhage, and left carotid angiography revealed an AcoA aneurysm. The next day, the aneurysm was occluded with coils via the femoral approach under general anesthesia. The patient received a bolus of 5,000 units of heparin immediately following the procedure, and an infusion rate of 10,000 units/day was initiated. The patient gradually became hypotensive 25 hours after coiling. Abdominal CT showed a huge, high-density soft-tissue mass filling the right side of the retroperitoneum space. The patient eventually died of multiple organ failure five days after coiling. RH after interventional radiology for neurological disease is relatively rare and can be difficult to diagnose if consciousness is disturbed. This case demonstrates the importance of performing routine physical examinations, sequentially measuring the hematocrit and closely monitoring systemic blood pressures following interventional radiologic procedures in patients with abnormal mental status.

• 한국전기화학회:학술대회논문집
• /
• 2003.11a
• /
• pp.141-151
• /
• 2003

The electrochemical activity of the olivine type $LiMPO_4$ (M=transition metals) cathodes strongly depends on various factors, e.g., the transition metal element M, perturbative doping of the supervalent cations into Li site, composite formation with conductive additives, state of charge/discharge, and particle size and its geometries, etc. This is, therefore, an important issue of interdisciplinary between electrochemistry and solid state science towards practical applications. In order to shed light on this interesting but complicated issue with the transport properties and crystallographic aspects, systematic discussion will be made with the review of our recent publications; (1) first principle derivation of the electronic structures, (2) crystallographic mapping of the selected solid solutions, (3) quantitative elucidation of the electron-lattice interaction, (4) spectroscopic detection of the local environment with Mossbauer and EXAFS, (5) synthetic optimization of the electrode composite, and (6) electrochemical evaluation of the reaction kinetics, particularly on M = Fe, Mn.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.420-425
• /
• 2006

Measurements results of flow-structure-interactions (FSI) of an air-lifted body are introduced. An adaptive stereoscopic-PIV system has been constructed for the measurements of the air-lifted body. The measurement system consists of two cameras and optical sensors. The flow characteristics around a lifted cylinder body(length=60mmm, diameter =10mm, polystyrene) in the swirling flow field in a vertical pipe (length=600mm, inner diameter=) are investigated by the use of the constructed adaptive stereoscopic-PIV system. The images of the two cameras were used for the analysis of the flow fields around the floated cylinder body. The images of the cylinder body captured by the two cameras were used for the analyses of its motions. Four optical sensors (LED) were used for the detection of the postures of the freely-lifted cylinder body. The FSI analyses have been carried out to find the physical conditions at which the floating body is stabilized with its upright postures.

• Journal of the Korean Ceramic Society
• /
• v.45 no.12
• /
• pp.760-765
• /
• 2008

In this study, the effects of small amounts (${\leq}3\;mol%$) of Li doping on the sintering characteristics and electrochemical performance of $(ZrO_2)_{0.89}(ScO_{1.5})_{0.1}(CeO_2)_{0.01}$ (ScSZ) were investigated. By adding 3 mol% lithium, the densification temperature of ScSZ was reduced from the conventional temperature of $1400^{\circ}C$ to $1200^{\circ}C$. It was found that Li doping also led to changes in the Zr:Sc ratio at the grain boundaries. Correspondingly, the dispersion of lithium zirconia at the grain boundaries accelerated the growth of ScSZ grains and increased the grain boundary resistance at temperatures below $450^{\circ}C$. At elevated temperatures of $450{\sim}750^{\circ}C$, the electrical conductivity of the ScSZ after doping remained almost unchanged under air and reducing atmospheres. These results suggest that the addition of lithium is promising for use in low temperature co-firing of ScSZ-based components for intermediate temperature solid oxide fuel cells.

• Proceedings of the Botanical Society of Korea Conference
• /
• 1996.06a
• /
• pp.50-63
• /
• 1996

Nitrogen (N) is an important regulator of the expression of genes involved in carbon and N assimilation pathways in plants by selectively altering the levels of proteins and/or mRNAs. These in C4 plants include genes for such as phosphoenolpyruvate carboxylase, carbonic anhydrase, and pyruvate-Pi dikinase. The C4 genes are regulated in mesophyll cells by N availability both transcriptionally and posttranscriptionally through cytokinins and glutamine as signals. The level of both the signals is up-regulated by N availability: cytokinins in roots and glutamine in leaves. The level of glutamine is controlled by the differential expression by N of glutamine synthetase and ferrdoxin-dependent glutamate synthase genes which locate in the mesophyll cells of C4 plants. The results is discussed as molecular mechanism for the greater N use efficiency of the plants as well as N partitioning is the photosynthetic cells.