• 한국염색가공학회지
• /
• 제14권4호
• /
• pp.197-207
• /
• 2002

The physical properties and dyeability of the nylon 6 fibers prepared by high speed spinning at take-up speed of 4,100~5,600m/min were investigated. The strain decreased as the take-up speed was raised from 4,100m/min to 4,400m/min, but further increase of take-up speed could not decrease the strain. The stresses of the fibers spinned at various take-up speed did not make any noticeable differences. Birefringences, densities and crystallinities of the fibers increased with the take-up speed and then reached to a nearly maximum value at 5,300m/min. In DSC diagrams, the $\gamma$ form of crystal became dominant at higher take-up speed. The dye uptakes of C. I. Acid Blue 113 on the fibers decreased a little with the increase of take-up speed.

• 노동경제논집
• /
• 제39권1호
• /
• pp.1-31
• /
• 2016

고용노동부 "고용보험DB" 의 상실자 종합통계와 실업급여 지급통계를 이용하여 구직급여 수급자격자의 수급과 재취업에 따른 수급자격 상실을 경합적 위험(competing risks)모형으로 분석하였다. 아울러 구직급여 수급률과 경기지수 간의 교차상관관계 분석을 하였다. 분석결과 구직급여 수급률이 실업률과 정(+)의 상관관계를 보이고, 6개월가량 실업률과 경기동행지수를 선행한다. 아울러 수급률이 연령, 학력, 급여지급기간, 소득대체율과 정(+)의 상관관계를 보이고 있다.

• 사회복지연구
• /
• 제39호
• /
• pp.287-314
• /
• 2008

국민기초생활보장제도의 시행 초기부터 제기되어온 사각지대와 부정수급집단의 특성을 파악하고자 한 본 논문은 차상위실태조사자료를 활용하여 분석하였다. 기존 문헌연구를 통해 사각지대(적격비수급 집단)와 부정수급집단(부적격수급 집단)이 발생하는 원인에 대해 수급자 측면의 욕구 및 낙인감 가설과 행정측면의 외형적 편의지표 의존가설이란 두 가지 가설을 제시하였고, 각각에 대해 다시 두 개씩의 하위 가설을 제시하였다. 차상위실태조사자료에서 적격비수급 집단, 부적격수급 집단, 적격수급 집단 등 3개 집단을 가려내고 이 3개 집단 중 적격수급 집단을 기준으로 적격비수급 집단과 부적격수급 집단을 각각 비교하여 그 특성 차이를 분석하였다. 적격수급 집단을 기준으로 적격비수급 집단을 비교한 결과 낙인감이 클수록 적격비수급 집단에 속할 가능성이 높아진다는 가설과 부양의무자가 존재가 행정담당자들의 편의적 판단과 결부되어 사각지대 발생 가능성을 높인다는 가설이 모두 지지 되었다. 이에 반해 적격수급 집단을 기준으로 부적격수급 집단의 특성을 비교한 결과 미충족 욕구가 클수록 부적격수급집단으로 편성될 가능성이 높다는 가설은 지지되지 못했지만, 근로능력을 가진 자가 불완전한 자산조사로 인해 부적격수급 집단으로 남을 가능성이 높다는 행정측면의 외형적 편의지표 의존가설은 지지되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1141-1145
• /
• 2005

This paper proposes a robust tension control algorithm for the let-off and take-up system driven by servo motor which is robust to disturbance and tension variation by using SVR(Support Vector Regression). Quality of textile goods in fiber manufacturing process highly depends on control of let-off, take-up and tension which are essential for constant tension control of yarn and textile fabrics and correct length of them. The physical properties of textile fabrics are very sensitive to several factors(temperature, humidity, radius change of warp beam etc.) which result in tension change. Rapid development of fiber manufacture machine for higher productivity requires control system for let-off, take-up and tension for robustness to sharp tension-variation and quick response. The validity and the usefulness of the proposed algorithm are thoroughly verified through numerical simulation.

• Fibers and Polymers
• /
• 제6권1호
• /
• pp.19-27
• /
• 2005

High-speed melt spinning of syndiotactic polystyrene was carried out using high and low molecular weight poly­mers, HM s-PS and LM s-PS, at the throughput rates of 3 and 6 g/min. The effect of take-up velocity on the structure and properties of as-spun fibers was investigated. Wide angle X-ray diffraction (WAXD) patterns of the as-spun fibers revealed that the orientation-induced crystallization started to occur at the take-up velocities of 2-3 km/min. The crystal modification was a-form. Birefringence of as-spun fibers showed negative value, and the absolute value of birefringence increased with an increase in the take-up velocity. The cold crystallization temperature analyzed through the differential scanning calorimetry (OSC) decreased with an increase in the take-up velocity in the low speed region, whereas as the melting temperature increased after the on-set of orientation-induced crystallization. It was found that the fiber structure development proceeded from lower take-up velocities when the spinning conditions of higher molecular weight and lower throughput rate were adopted. The highest tensile modulus of 6.5 GPa was obtained for the fibers prepared at the spinning conditions of LM s-PS, 6 g/min and 5 km/min, whereas the highest tensile strength of 160 MPa was obtained for the HM s-PS fibers at the take-up velocity of 2 km/min. Elongation at break of as-spun fibers showed an abrupt increase, which was regarded as the brittle-duc­tile transition, in the low speed region, and subsequently decreased with an increase in the take-up velocity. There was a uni­versal relation between the thermal and mechanical properties of as-spun fibers and the birefringence of as-spun fibers when the fibers were still amorphous. The orientation-induced crystallization was found to start when the birefringence reached -0.02. After the starting of the orientation-induced crystallization, thermal and mechanical properties of as-spun fibers with similar level of birefringence varied significantly depending on the processing conditions.

• 대한기계학회논문집A
• /
• 제20권2호
• /
• pp.585-593
• /
• 1996

According to the considerable increase of the length of belt conveyors, the dynamic analysis of systme becomes necessary to consider the variation of tensions and transient motion of components during starting and stopping of conveyor. The mathematical model of system is derived using the lumped parameter method. The input driving force is represented with two functions of time and pulley speed to count the characteristics of motor and fluid coupling. An example system was studied with 14 km in the distance of carrying. At head, it has two drivers and one gravity take-up and at tail ond driver and one power winch take-up. In the example, the transient tensions and responses, calculated using two cases of driving force, are mutually compared in starting mode. Also, the position of maximum tension and the braking force of take-up are obtained in stopping mode.

• Composites Research
• /
• 제26권4호
• /
• pp.254-258
• /
• 2013

본 연구에서는 폴리프로필렌과 다양한 탄소나노소재를 사용하여 제조한 복합재의 압출방향 및 권취속도에 따른 기계적 물성과 결정화도에 대한 연구를 수행하였다. 폴리프로필렌에 탄소나노소재를 균일하게 분산시키기 위해 미분쇄기에 폴리프로필렌 분말(<700 ${\mu}m$)과 탄소나노소재를 혼합한 후 나노복합재 필름 제조를 위해 압출기를 사용하였다. 나노복합재 필름의 결정화도를 분석하기 위해 differential scanning calorimetry를 이용하였다. 기계적 물성을 인장시험을 통해서 측정한 후 순수 폴리프로필렌 물성과 비교하였고, 압출 시 필름 권취속도에 대한 나노복합재 결정화도의 차이를 확인하였다. 탄소나노소재를 첨가함으로써 고분자 필름의 기계적 물성이 향상됨을 확인하였고, 그에 따른 결정화도 역시 증가하는 것을 확인하였다. 반면, 권취속도가 증가 할수록 압출물의 냉각속도도 역시 증가함으로써 결정화도가 오히려 감소함을 확인하였다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2006년도 춘계 종합학술대회 논문집
• /
• pp.388-391
• /
• 2006

최근 몇 년간 게임인공지능에 대한 관심도가 높아지고 있으며, 이에 대한 연구도 활발히 이루어지고 있다. 본 논문에서는 컴퓨터 게임에서 사용하고 있는 인공지능 기술과 MMORPG(Massively Multiplayor Online Role Playing Game)에서 NPC(non-player character)가 가지는 일반적인 특징을 살펴본다. 게임의 흥미를 유발하기 위한 지능형 NPC의 역할과 특징을 고찰하고, MMORPG에 요구되는 지능형 NPC에 관한 인공지능 기술에 대해서 연구한다.

• 한국염색가공학회지
• /
• 제25권1호
• /
• pp.47-55
• /
• 2013

Physical properties of the composite yarn using low-melting(LM) polyester/Tencel were investigated with air-jet texturing conditions such as temperature, take-up overfeed, yarn speed and air pressure. Surface morphology, microstructure, tensile property, glossiness were evaluated. Surface morphology of a composite yarn had more damaged and loosened structure according to increase of take-up overfeed, yarn speed and air pressure. Crystallinity was affected by parameters such as temperature, yarn speed, take-up overfeed and air pressure and especially, yarn speed was most effective for increase of crystallinity. Also, it was found that temperature and air pressure had significantly affected tensile properties of a composite yarn. The glossiness of yarn increased with increase of temperature, yarn speed and air pressure.

• 한국의류산업학회지
• /
• 제1권2호
• /
• pp.166-172
• /
• 1999

An experimental investigation has done for studying the changes of physical properties of the air-jet textured polyester yarn. Through the experiments of polyester 85/72 drawn yarn and 50/36 partially oriented yarn doubling' the following results are obtained. The tenacity of textured yarn decreased as the number of tension rings increased when the nozzle diameter was 1.2 mm. In the case when the tension ring was not used during the texturing process, the tenacity of textured yarn decreased as the nozzle diameter increased. But this tendency changed according to the number of tension rings used, the diameter of the nozzle, and yarn take-up speed. Breaking elongation decreased as the number of tension rings increased from one to four and the take-up speed increased at diameter 1.2 mm of the nozzle. The higher the diameter of the the nozzle the higher the breaking elongation until 1.4 mm. The number of interlacing went down as the diameter of the nozzle increased and the take-up speed of the yarn increased. The higher the number of tension rings, the lower the number of interlacing.