• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2000.02a
• /
• pp.35-38
• /
• 2000

A preliminary design of gas-gp thermal switch is presented to reduce the cooldown time of superconducting system conduction-cooled by a two-stage refrigerator without liquid cryogens. The switch connects thermally the first and the second stages (ON) to take advantage of the larger refrigeration capacity at the first stage during the beginning period. After the cryogenic temperature is reached, the switch should isolate thermally the two stages (OFF) in order to reduce the heat leak to the cold end. In this paper, a new concept for the performance index is introduced to evaluate the reduction of the cooldown time and the increase of the cooling load at the same time. In addition, the design of a gas-gap switch is discussed as a closed container of several staggered concentric tubes filled with gas, which is frozen at low temperatures for the shut-off of heat without any mechanical actuation. Some of the detailed features in the design is quantitative investigated by the gas convection model in the continuum or the rarefied gas region.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.383-384
• /
• 2022

Gas Combustion Unit (GCU) onboard liquefied natural gas carriers handles boil-off to stabilize tank pressure. There are many factors for LNG cargo operators to take into consideration to determine whether to use GCU or not. Gas consumption of main engine and re-liquefied gas through the Partial Re-Liquefaction System (PRS) are good examples of these factors. Human gas operators have decided the operation so far. In this paper, some deep learning neural network models were developed to provide human gas operators with a decision support system. The models consider various factors specially into GCU operation. A deep learning model with Sigmoid activation functions in input layer and hidden layers made the best performance among eight different deep learning models.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.1
• /
• pp.49-56
• /
• 2003

A steady-state performance simulation program using $EASY5^{(R)}$ on the turboprop engine was developed through in this study. The PT6A-62 turboprop engine which is the power plant of the first Korean basic trainer KT-1, was selected for this study. In order to evaluate the proposed perfrmance model the analysis results of $EASY5^{(R)}$ model were compared with the simulated results by the GASTURB program, which is well blown commercially for the simulation performance analysis at various cases. The first case was the uninstalled condition with various altitudes from ground to 30000ft and flight Mach No. 0. The second case was the install condition with various altitude from ground to M at the maximum take off and the ECS (Environmental Control System) OFF conditions. The third case was install condition with the altitude range from 5000 ft to 1000ft and Mach No. 0.1 to 0.3 at maximum ECS operating condition. It was confirm that the results by the $EASY5^{(R)}$ model were well agreed with those by GASTURB within maximum 5.0%

• Korean Journal of Applied Biomechanics
• /
• v.26 no.1
• /
• pp.71-82
• /
• 2016

Objective: The purpose of this study was to investigate kinematic comparisons of Tsukahara vault in gymnastics between a top-level athlete and sublevel collegiate athletes in order to obtain information on key biomechanical points for successful Tsukahara vaults. Methods: An Olympic gold medalist (height, 160 cm; weight, 52 kg; age, 25 years) and five sublevel collegiate gymnasts (height, $168.2{\pm}3.4cm$; weight, $59.6{\pm}3.1kg$; age, $23.2{\pm}1.6years$) participated in this study. They repeatedly performed Tsukahara vaults including one somersault. Fourteen motion-capturing cameras were used to collect the trajectories of 26 body markers during Tsukahara vaults. Event time, displacement and velocity of the center of mass, joint angles, the distance between the two hands on the horse, and averaged horizontal and vertical impact forces were calculated and compared. Results: The top-level athlete showed a larger range of motion (ROM) of the hip and knee joints compared to sublevel collegiate athletes during board contact. During horse contact, the top-level athlete had a narrow distance between the two hands with extended elbows and shoulders in order to produce a strong blocking force from the horse with a shorter contact time. At the moment of horse take-off, reactive hip extension of the top-level athlete enhanced propulsive take-off velocity and hip posture during post-flight phase. Conclusion: Even though a high velocity of the center of mass is important, the posture and interactive action during horse contact is crucial to post-flight performance and the advanced performance of Tsukahara vaults.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.788-797
• /
• 2023

In this paper, we introduced a test environment to test a vision-aided navigation system, as an alternative navigation system when global positioning system (GPS) is unavailable, for vertical take-off and landing (VTOL) unmanned aerial system. It is efficient to use a virtual environment to test and evaluate the vision-aided navigation system under development, but currently no suitable equipment has been developed in Korea. Thus, the proposed test environment is developed to evaluate the performance of the navigation system by generating input signal modeling and simulating operation environment of the system, and by monitoring output signal. This paper comprehensively describes research procedure from derivation of requirements specifications to hardware/software design according to the requirements, and production of the test environment. This test environment was used for evaluating the vision-aided navigation algorithm which we are developing, and conducting simulation based pre-flight tests.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.15-26
• /
• 2003

This study was conducted to investigate the performance times, CM position and CM speed, pole chord length and pole chord angle, whole body angular momentum(X axis), and grip width in pole vault event according to the event and phase; touch down, pole plant, take-off, maximum pole bending pole straight, pole release, peak height, and foot contact, pole contact, free flight. The pole vaulting of four male elite vaulters including six trial were filmed using two video digital cameras at 60 Hz at 56th national athletic match, and data were collected through the DLT method of three dimensional cinematography. In general the better jumper is, the longer the performance time is. And the greater CM speed is, and the better his transformation ability of CM horizontal speed into vertical speed is. As he uses a longer pole, his grip is higher, and it is a enough for him to rock back his body, so that he pulls and pushes the pole well keeping his hips close to. An greater maximum angular momentum and early positioning of the hips parallel to the bar makes his body far side of the bar and his bar clearance easier. Specially our national jumper needs to have more powerful braking force during foot contact phase, and take his body on the pole after maximum pole bending, and pull and push the pole strongly keeping his hips close to. Also he needs to have stronger muscular strength in order to control the longer pole and use the pole of proper tension more efficiently.

• IE interfaces
• /
• v.16 no.spc
• /
• pp.99-104
• /
• 2003

While demands for express service are rapidly increasing according to recent progress of electronic commerce, express service companies are struggling to take a larger delivery service market share through ongoing improvement in their service processes. Extension of cut-off time for express service centers can provide the express company with increase of total sales, but it may also cause to increase the possibility not to satisfy customer needs due to work delay in the consolidation terminal. Therefore, compromised decision for cut-off time of each service center should be made by taking operation characteristics of the consolidation terminal into account. This study suggests an approach for determining the cut-off time for express service centers according to operational characteristics of the consolidation terminal with the objective of maximizing expected incremental sales. The problem defined in this study can be represented as two successive models; one is an integer programing model in which the best cut-off time for each sales center are determined, and the other is a single machine scheduling model in which a working schedule in the consolidation terminal is obtained. A genetic algorithm is developed to solve the two models simultaneously. Finally, an example problem is carried out to verify applicability and performance of the algorithm with the data set collected from an express company.

• Management & Information Systems Review
• /
• v.4
• /
• pp.225-255
• /
• 2000

The basic purpose of this research is to analyse a relationship between the integration level of AMT(ILAMT) and manufacturing performance (cost, quality, flexibility, delivery) and to identify the moderating effects of organizational structure in the relationship. First research question(hypothesis 1) was to examine the relationship between ILAMT and manufacturing performance. We tested this question using simple regression analysis. All of the correlation were positive and significant at the level of 1%(two-tail test). Therefore, hypothesis 1 was supported by the results. It means that firms that have high ILAMT are to exhibit high level of all manufacturing performance(cost, flexibility, quality, delivery). Namely, It is that the integration of AMT can solve the trade-off among manufacturing performance. Second research question (hypothesis 2) was to identify the moderating effects of organizational structure on the relationship between ILAMT and manufacturing performance. we tested this question using moderated regression analysis. According to the results, hypothesis 2 was partially supported. In other words, formalization and decentralization were accepted, but complexity was rejected. It means that firms with high ILAMT and an organic organizational structure are more likely to exhibit high level of manufacturing performance. To the practitioners, this research provided the answer to what they ought to do make AMT work in their organizations. To increase the effectiveness of AMT, first of all, they should take notice of the importance of integrated use of AMT, and the implementation of AMT should take into consideration the characteristics of organizational structure manufacturing strategy so that the effect of AMT may be multiplied by using AMT.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.3
• /
• pp.207-215
• /
• 2014

As a reinforcement material for RC members, the modified epoxy mortar has been reported one of the superior materials since the material can improve the load capacity and the seismic performance of the RC members. However, there were few experimental studies and analytical research for improving seismic performance with the material. This study is to propose an effective reinforcement plan for RC Ordinary Moment Resisting Frame (OMRF) with the evaluation of seismic performance and economic analysis. For the objective, first, the load-deflection curve of a simple beam specimen was compared with the analytical results. Second, a 5-story RC OMRF structure was designed only for gravity load and the alternatives for seismic reinforcement were suggested. Third, pushover analysis was executed for evaluation of design coefficients and seismic performance of the structures. Finally, an effective reinforcement plan was suggested based on the results of quantity take-off and economic analysis. The findings of this study can be utilized as the basic data when the modified epoxy mortar is applied to practice for improving the seismic performance of RC members.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.426-431
• /
• 2011

The quality of performance evaluation on engineering consultants that provide design-related technical services is difficult to be measured, and only a handful of papers discussed the quality during the design stage. Although design cost is relatively far less than construction cost for a project, the decisions made in the design phase have a significant impact on the final products of the project, especially for large public construction projects. Therefore, this research focuses on reviewing and then establishing a performance evaluation framework for the consulting firms that execute detailed design and provide technical services for the Taipei Rapid Transit Systems (TRTS). By interviewing experts, this study first established a set of indicators to evaluate these firms' performance. Then, those indicators were incorporated into the four aspects of balanced scorecard (BSC) to establish the architecture of the evaluation mechanism. The weight of each indicator was calculated by analytic hierarchy process (AHP) from a survey conducted among experts. The results showed that the top-three indicators were quantity take-off, functions conformity, and budgeting. The framework of performance evaluation established by this study can be applied to measure service performance during the design stage. It not only facilitates the monitoring of consulting firms, but also helps to reduce unnecessary change orders and disputes during the construction stage.