• Journal of the military operations research society of Korea
• /
• v.27 no.1
• /
• pp.73-88
• /
• 2001

Designing high quality products and processes at a low cost is central technological and economic challenge to the engineer. The combination of engineering concepts and statistical implementations offered by Taguchi\`s off-line design technique has proven t be invaluable. By examining some deficiencies in designs from the Taguchi\`s highly fractional, orthogonal main effect plan based on orthogonal arrays, alternative method is proposed. The maximum resolution or the minimum aberration criterion is commonly used for selecting 2$^{n-m}$ fractional designs. We present new high resolution (low aberration) linear graphs to simplify the complexity of selecting designs with desirable statistical properties. The new linear graphs approach shows a substantial improvement over Taguchi\`s linear graphs and other related graphical methods for planning experiment. The new set of linear graphs will allow the experimenter to maintain the simple approach suggested by Taguchi while obtaining the best statistical properties of the resulting design such as minimum aberration as a by-product without dependency on complicated computational algorithm or additional statistical training.g.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.1
• /
• pp.39-46
• /
• 2010

The growth of function in vehicle needs complex display and control system, the In-Vehicle Information System(IVIS). Although current IVISs are widely implemented in commercial vehicles, a new form of IVIS has been recently studied in order to reduce drivers' workloads. The purpose of this study is to suggest an appropriate menu structure of a new type IVIS, to be implemented on the instrument cluster panel, using Taguchi's parameter design. In the research, firstly, functions were selected that are appropriate to control through the instrument cluster among existing functions of current IVISs by quantitative evaluation of ergonomic principles. Then, menu structure alternatives were extracted by investigating priorities to those functions selected. Finally, menu structure alternatives were evaluated through an experiment and suggest the most appropriate one by applying Taguchi's parameter design. Taguchi method was used not only for planning an experiment but also evaluating alternatives. SN ratios were a key value to evaluate the alternatives and to find the most proper one. Through the research, the most appropriate menu structure for the instrument cluster IVIS was finally suggested among the alternatives and it is expected that the results of this research could provide a guideline to the instrument cluster IVIS.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.277-280
• /
• 2008

Multi layer bellows are being manufactured for commercial vehicle because of the characteristic of high durability compared with single iaγor bellows used to passenger vehicle. Finite Element Method (FEM) study and optimization about single layer bellows are actively progressed, but FEM study about multi layer bellows which have gap between layer is rarely processed. Therefore, this article presents finite element modeling of multi layer bellows for the improvement of simulation reliability. For the shape optimization of multi layer bellows, design of experiment and Taguchi method are used.

• Transactions of Materials Processing
• /
• v.9 no.3
• /
• pp.257-264
• /
• 2000

In this study, optimization for press forming condition of low arm was performed with explicit dynamic FEM code, Pam-Stamp. FEM simulation was coupled with the Taguchi's experiment technique having three design variables - friction coefficient, plastic anisotropy parameter, and blank shape - which are chosen to be optimized. The simulation results were compared with those of experiment. We found out the change of blank shape among these three design variables is very effective in optimizing press forming condition of low arm. In addition, the modified blank shape shows high yield of slitting coil.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.7
• /
• pp.58-64
• /
• 2009

In this paper, an inspection mechanism based on laser scattering has been developed for the surface evaluation of infrared cut-off filters, and optimum conditions of laser scattering are determined using the design of experiment. First of all, attributes and influence factors of laser scattering are investigated and then a laser scattering inspection mechanism is newly designed based on analyses of laser scattering parameters. Also, Taguchi method, one of experimental designs, is used for the optimum condition selection of laser scattering parameters and the optimum condition is determined in order to maximize the detection capability of surface defects. Experiments show that the proposed method is useful in a consistent and effective defect detection and can be applied to surface evaluation processes in manufacturing.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.385-389
• /
• 2003

Three-dimensional experimental analysis was conducted in the pulverizer simplified isothermal model. The experiment model was constructed on a 1/3.5 scale of 500MW pulverizer. The purpose of this study is to investigate the effect of design parameters on the pulverized coal separator efficiency. Where used pulverized coal separator design parameters are guide vane angle, static classifier angle, dynamic classifier rpm. Taguchi method was used to find the effective design parameters related to pulverized coal separator efficiency. The results of the experiment showed that guide vane angle and dynamic classifier rpm were the design key parameters. In addition to the total number of experiment cases were reduced by Taguchi method.

• Safety and Health at Work
• /
• v.6 no.2
• /
• pp.77-84
• /
• 2015

Background: A unique framework for performance optimization of generation companies (GENCOs) based on health, safety, environment, and ergonomics (HSEE) indicators is presented. Methods: To rank this sector of industry, the combination of data envelopment analysis (DEA), principal component analysis (PCA), and Taguchi are used for all branches of GENCOs. These methods are applied in an integrated manner to measure the performance of GENCO. The preferred model between DEA, PCA, and Taguchi is selected based on sensitivity analysis and maximum correlation between rankings. To achieve the stated objectives, noise is introduced into input data. Results: The results show that Taguchi outperforms other methods. Moreover, a comprehensive experiment is carried out to identify the most influential factor for ranking GENCOs. Conclusion: The approach developed in this study could be used for continuous assessment and improvement of GENCO's performance in supplying energy with respect to HSEE factors. The results of such studies would help managers to have better understanding of weak and strong points in terms of HSEE factors.

• Advances in materials Research
• /
• v.6 no.1
• /
• pp.79-91
• /
• 2017

In the present work, a design of experiment (DOE) technique using Taguchi method, has been applied to optimize the properties of ODS tungsten heavy alloys(WHAs). In this work Taguchi method involves nine experiments groups for four processing parameters (compaction pressure, sintering temperature, binding material type, and oxide type) with three levels was implemented. The signal-to-noise (S/N) ratio and analysis of variance (ANOVA) were employed to obtain the optimal process parameter levels and to analyze the effect of these parameters on density, electrical conductivity, hardness and compressive strength values. The results showed that all the chosen factors have significant effects on all properties of ODS tungsten heavy alloys samples. The density, electrical conductivity and hardness increases with the increase in sintering temperature. The analysis of the verification experiments for the physical properties (density and Electrical conductivity) has shown that Taguchi parameter design can successfully verify the optimal parameters, where the difference between the predicted and the verified values of relative density and electrical conductivity is about 1.01% and 1.15% respectively.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.407-410
• /
• 2007

In the RRH (Radio Remote Head) of a WCDMA Node B System, an HPA (High Power Amplifier) is used in order to amplify the transmission RF signal. Upon designing an HPA, the design requirements demand that the intermodulation characteristics are optimized during design and that the stability of the characteristics is maintained in the field. In this DOE (Design of Experiments) research, a few vital factors that affect intermodulation characteristics were first selected; then, an optimal solution was produced for high reliability in a noisy environment in the field by employing the Taguchi Method, a statistical method used for a robust design. Furthermore, by employing HALT(High Accelerated Life Test) during the verification test, this experiment has verified that an HPA that was designed using the Taguchi Method proved to be a far more robust design than an HPA that was designed without using the method.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.4
• /
• pp.245-250
• /
• 2014

The purpose of this study is to introduce a empirical study of using Taguchi Method for the Entrepreneurial Orientation and Financial Performance. In this study, three factors of Entrepreneurial Orientation, innovation, pro-activity and risk taking, are used of the control factors and an element, period of establishment, is chosen as a noise factor. In order to carry out this research, we obtained 200 survey sheets and performed the reliability and validity analysis of the questionnaires and then the experiment was conducted by Taguchi's experimental design. To improve Financial Performance under the noise factor of period of establishment, optimal condition are as follows; the two factors of Entrepreneurial Orientation, innovation, pro-activity should be maintained to a high level. Also, other factor, risk taking should be performed as the level that the company has maintained. Through this paper, we find out that Taguchi method is applicable for analysis of questionnaire.