• 응용통계연구
• /
• 제26권2호
• /
• pp.223-236
• /
• 2013

미국 프로야구(Major League Baseball) 명예의 전당의 입성과 탈락을 예측할 수 있는 여러 가지 통계적인 분류분석법을 실시하고 그 결과의 정확성을 비교하였다. 이를 위해 명예의 전당 가입 조건을 만족하는 타자들 중 1980년 이후 기록된 데이터의 17개의 독립변수를 사용하여 분류분석에서 널리 사용되는 기준으로 판별분석, 로지스틱 회귀분석과 상대적으로 최근에 제안된 Mahalanobis-Taguchi System(MTS)을 실시하여 비교하였다. 이 세 가지 방법 중 MTS가 상대적으로 더 나은 효율을 보였으며 이는 다변량 관측 값이 방향성이 없어 속성에 따른 도형적 그룹을 형성하지 못하는 경우에 효율적인 MTS의 특성에 의한 것으로 판단된다.

• Corrosion Science and Technology
• /
• 제20권2호
• /
• pp.77-84
• /
• 2021

This study aims to optimize the DL-EPR test solution for duplex stainless steel S31083 using the Taguchi design. The test solution parameters applied to the Taguchi design are H₂SO₄, NaCl, KSCN concentration, and temperature. In the experimental design, an orthogonal array of 4 levels 4 factor L₁₆(4⁴) was used. Output values for the orthogonal array were used for resolution (degree of sensitization) and selective etch (I_a) values. The optimal test solution conditions were selected by comparing the normalized S/N ratio for the two reaction properties. As a result, the H₂SO₄ and NaCl were identified as the main factors influencing the sensitivity measurement, but the delta statistics showed that the KSCN concentration and temperature had relatively low influence. The optimal condition was identified as 1.5 M H₂SO₄+0.03 M KSCN+1.5M NaCl at 30 ℃. The degree of sensitization presented a tendency to depend on the heat treatment temperature and time in the optimal test solution. This investigation confirmed the possibility of optimizing the experiment solution for the DL-EPR test of stainless steel using the Taguchi technique.

• 한국인터넷방송통신학회논문지
• /
• 제19권4호
• /
• pp.41-46
• /
• 2019

타구치 직교배열표를 활용하여 마이크로스트립 패치 안테나 설계를 효율적으로 수행 가능한지를 분석하였다. 비교 및 분석을 위하여 U-슬롯 마이크로스트립 패치 안테나에서 U-슬롯의 모양과 변형된 급전부의 요소를 파라미터로 정했다. 해당 파라미터들의 스윕을 통해 도출된 모든 시뮬레이션의 결과와 타구치의 직교배열표를 이용하여 도출된 축소 시뮬레이션 결과를 비교분석하였다. 파라미터 스윕을 이용하여 진행된 19,683회의 시뮬레이션을 타구치의 직교배열표를 이용한 27번의 시뮬레이션으로 대폭 축소하였으며, 파라미터 스윕과 직교배열표를 이용한 시뮬레이션의 평균 10dB 대역폭은 3.7%의 오차를 가진다. 따라서, 시뮬레이션 횟수를 줄이고도 효율적으로 안테나 파라미터 특성을 파악할 수 있음을 확인했다.

• 한국수소및신에너지학회논문집
• /
• 제32권6호
• /
• pp.636-641
• /
• 2021

Using numerical analysis, various factors influencing the performance development of high-pressure pumps for Dimethyl Ether (DME) engines were identified and the impact of each factor was evaluated using Taguchi method. DME fuels are more compressive than diesel fuels and have the lower heat generation, so it is necessary to increase the size of the plunger and speed (RPM) of the pump as well. In addition, it is necessary to change the shape and design of control valve to control the discharge flow and pressure. In this study, various variables affecting the performance and flow rate increase of high-pressure pumps for DME engines are planned using Taguchi method, and the best design method is proposed using correlation of the most important variables. As a result, we were able to provide the design value needed for a six-liter engine and provide optimal conditions. The best combination factors to optimize the flow rate at RPM 2,000 and diameter plunger with 20 mm. The regression equation can also be used to optimize the flow rate; -8, 13+0, 2552 RPM +54, 17 diam. Plunger.

• 한국환경과학회지
• /
• 제30권12호
• /
• pp.983-991
• /
• 2021

The role of the distribution basin role is to apportion incoming raw water to the primary sedimentation basin as part of the water treatment process. The purpose of this study was to calculate the amount of water in the distribution basin using computational fluid dynamics (CFD) analysis and to find a way to improve any non-uniformity. We used the Taguchi method and the minitab tool as optimization methods. The results of the CFD calculation showed that the distribution flow had a deviation of 5% at the minimum inflow, 10% at the average inflow, and 22% at the maximum inflow. At maximum flow, the appropriate heights of the 7 weirs(C, D, A, B, E, F, G) were 40 mm, 20 mm, 20 mm, 0, 0, 0, and 20 mm, respectively, according to the Taguchi optimization tool. Here, the maximum deviation of the distribution amount was 9% and the standard deviation was 23.7. The appropriate heights of the 7 weirs, according to the Minitab tool, were 40 mm, 20 mm, 20 mm, 0, 0, 0, and 20 mm, respectively, for weirs C, D, A, B, E, F, and G. Therefore, the maximum deviation of the distribution amount was 8% and the standard deviation was 17.1, which was slightly improved compared to the Taguchi method.

• Steel and Composite Structures
• /
• 제48권6호
• /
• pp.625-639
• /
• 2023

In this paper, a Taguchi-based finite element method (FEM) has been proposed and implemented to assess optimal design parameters for minimum static deflection in laminated composite plate. An orthodox mathematical model (based on higher-order shear deformation plate theory and Green-Lagrange geometrical nonlinearity) has been used to compute the nonlinear central deflection values of laminated composite plates according to Taguchi design of experiment via a self-developed MATLAB computer code. The lay-up scheme, aspect ratio, thickness ratio and the support conditions of the laminated composite plate structure were designated as the governable design parameters. Analysis of variance (ANOVA) is used to investigate the effect of diverse control factors on the nonlinear static responses. Moreover, regression model is developed for predicting the desired responses. The ANOVA revealed that the lay-up scheme alongside the support condition plays vital role in minimizing the central deflection values of laminated composite plate under uniformly distributed load. The conformity test results of Taguchi analysis are also in good agreement with the numerical experimentation results.

• 한국정밀공학회지
• /
• 제24권3호
• /
• pp.76-83
• /
• 2007

The Taguchi method is applied to obtain the optimal design of an automotive pedal arm in consideration of the stiffness test specification. Design parameters are defined to describe shape of the pedal arm. Volume, maximum Von-Mises stress and maximum displacement of the pedal arm are established as the smaller-the-better characteristics. Optimal parameters are determined on the basis of the analyzed level averages of the characteristics.

• 품질경영학회지
• /
• 제25권3호
• /
• pp.119-130
• /
• 1997

In this paper, we analyze quality loss function(QLF) of Taguchi. Taguchi method of QLF gives more advanced measure process capability than classic capacity(i.e. Cp). We first discuss of QLF and Cp and give one good example of QLF. Because of simplicity of QLF, it is not good fit to a, pp.y in the real field. We suggest interval quantity-loss cost function and total loss cost(TLC) which modify QLF. Also we give one example which can be obtained in the real field.

• 오토저널
• /
• 제11권6호
• /
• pp.3-16
• /
• 1989

본 고에서는 품질향상 측면보다는 실험계획법 자체에 중점을 두고 이를 소개하고자 한다. 실험게획의 일차적 목적은 어느 의미에서는 모형화 즉 반응치에 미치는 각 인자의 주효과의 교호작용 관게를 규명하는 것이라고 볼 수 있으며 방법론에서 전조합실시법과 부분실시법으로 구분할 수 있는데 부분실시법의 목적은 어떻게 하면 경제적으로 시험횟수를 최소화하되 전조합실시법의 효과를 낼 수 있는가 하는 것이다. Taguchi의 실험계획은 직교배열을 이용한 부분실시법에 근거를 두고 있다.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2010년도 춘계학술대회
• /
• pp.373-377
• /
• 2010

In this note, we deal with a design problem for determining the levels of noise factors in the Taguchi method, give some comments on the proposal in Ree(2009), and compare two proposals by an example.