• Journal of Applied Reliability
• /
• v.4 no.1
• /
• pp.39-64
• /
• 2004

Taguchi's multi-characteristic experiments seek proper choice of levels of contollable factors which satisfy that all reponses of characteristics in a desirable range simultaneously. This aim can be achieved by response surface techniques that allow more flexible in modeling than traditional Taguchi's parameter design. In this article, a multi-response surface modeling and analysis techniques is proposed to deal with the multi-characteristic optimization problem in experimentation with Taguchi's controllable and noise factors.

• Journal of Korean Society for Quality Management
• /
• v.27 no.1
• /
• pp.165-194
• /
• 1999

Taguchi's parameter design seeks proper choice of levels of controllable factors (Parameters in Taguchi's terminology) that makes the qualify characteristic of a product optimal while making its variability small. This aim can be achieved by response surface techniques that allow flexibility in modeling and analysis. In this article, a collection of response surface modeling and analysis techniques is proposed to deal with the multiresponse optimization problem in experimentation with Taguchi's signal and noise factors.

• Journal of Integrative Natural Science
• /
• v.12 no.3
• /
• pp.69-73
• /
• 2019

Taguchi has used the signal-to-noise ratio (SN) to achieve the appropriate set of operating conditions where variability around target is low in the Taguchi parameter design. Taguchi has dealt with having constraints on both the mean and variability of a characteristic (the dual response problem) by combining information on both mean and variability into an SN. Many Statisticians criticize the Taguchi techniques of analysis, particularly those based on the SN. In this paper we propose a substantially simpler optimization procedure for parameter design to solve the dual response problems without resorting to SN.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.180.2-180.2
• /
• 2005

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.479-480
• /
• 2010

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.565-571
• /
• 2001

As a method of structural optimization, a practical algorithm based on the Taguchi method is developed. The Taguchi method is applied iteratively updating the level values of design variables. The design region is translated or reduced during optimization and by appropriate choice of reduction factor and initial level intervals, a near-optimum solution can be found very efficiently. To treat inequality constraints, a variable penalty method is utilized. A software system named 'DS/Taguchi' is developed by integrating the proposed algorithm and commercial finite element analysis codes on the parametric CAD platform. Two examples are taken to examine the performance of the proposed algorithm and the developed software system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.188-191
• /
• 2005

Taguchi method is used to determine the optimal configuration of PZT (Lead Zirconate-Titanate) patch on the host structure for improving the performance of piezoelectric shunt system. The charges generated on the surface of PZT patch are selected to be the objective function in the Taguchi method. Full three dimensional finite element models are used to simulate vibration of smart panel and to obtain the admittance of the piezoelectric shunt system. Using Taguchi method in Minitab, the optimal model is obtained. The experiment with piezoelectric shunt circuit is performed to verify the validity of the optimal model comparing with initial model.

• Journal of Korean Society for Quality Management
• /
• v.20 no.1
• /
• pp.80-90
• /
• 1992

In industries, the capability indices $C_p$ and $C_{pk}$ can be used to provide measures of process potential capability and performance, respectively. The new approach advocated by Taguchi in quality control overcomes some problems in other approaches preventive management activities. Taguchi introduces the emphasis on loss function to improve quality of products on the side of customer. The proceeding concept of capability indices is not rational for the measurement of quality if the process mean is not equal to target value. The Taguchi approach is said to be more reasonable than the others in quality evaluation because of his loss function. However, the capability indices $C_{pm}{^+}$ and $C_{pn}$ using Taguchi's loss function only consider, acceptance cost for deviation from target value within specification limits. In other words, they do not include rejection cost for nonconformings that are failed to fall on the specification limits.

• Journal of the Korean Ceramic Society
• /
• v.42 no.1
• /
• pp.11-15
• /
• 2005

The configuration of the main components and the physical structure of the Taguchi sensor, the first ceramic gas sensor mass produced, has remained virtually unaltered since its appearance 40 years ago. This device owns an excellent combination of the quality factors but is non-selective. The research efforts carried out to enhance the selectivity in this resistive gas sensor are briefly reviewed. A novel design, Capillary-attached Gas Sensor (CGS), is introduced, which employs the same ceramic components used for the fabrication of a classical Taguchi sensor but in altered geometries. CGS presents remarkable advantages from the view point of selectivity over the original design. While the steady state response of a CGS has the same significance as that of the Taguchi sensor, its transient response presents valuable diagnostic information. Fabrication and test of a prototype CGS is reported.

• Journal of Power System Engineering
• /
• v.16 no.2
• /
• pp.54-59
• /
• 2012

In the present study, process optimization for thermal-sprayed Ni-based alloy coating has been performed using Taguchi method and analysis of variance(ANOVA). Ni-based alloy coatings were fabricated by flame spray process on steel substrate, and the hardness test and wear test were performed. Experiments were designed as per Taguchi's L9 orthogonal array and tests were conducted with different Oxygen gas flow, Acetylene gas flow, Powder feed rate and Spray distance. Multi response signal to noise ratio (MRSN) was calculated for the response variables and the optimum combination level of factors was obtained simultaneously using Taguchi's parametric design.