• Journal of Korean Society for Quality Management
• /
• v.29 no.4
• /
• pp.82-91
• /
• 2001

Taguchi robust design is widely used to quality improve methods. Especially, interest of dynamic characteristics parameter design is getting grow. In this paper, we have a comparative analyzed three Signal-to-Noise Ratios which are used in American Supplier Institute(ASI), MINITAB and Taguchi series published by Japanese Standard Institute with numerical examples.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.3
• /
• pp.98-104
• /
• 2009

The objective of this paper is to investigate the effect of factors on the dynamic stiffness variation of boring bar. The experiment was carried out by Taguchi Method and Orthogonal array table. The results indicate that overhang was found out to be dominant factor with 95% confident intervals and feed rate and depth of cut were insignificant. In addition, analysis of loss function shows that loss value increased sharply from 3D to 4D(D is a shank diameter). Consequently, there is critical point which changes property of dynamic stiffness.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.5
• /
• pp.351-360
• /
• 2013

Taguchi's robust design is a method for quality improvement by making a system insensitive to uncontrollable variations incurred by noise factors and it has received much attention in a wide range of engineering fields. Robust design can be broadly classified into static and dynamic ones. This paper is concerned with dynamic robust design. Taguchi suggested to use a signal-to-noise ratio as a robustness measure, but there has been much debate and criticism on its blind use. In order to cope with this drawback, many alternatives have been proposed. They are divided into performance measure modeling (PMM) and response function modeling (RFM) approaches. In this paper, both PMM and RFM approaches for dynamic robust design are reviewed. An example for illustration is provided as well.

• Journal of Korean Society for Quality Management
• /
• v.26 no.2
• /
• pp.17-26
• /
• 1998

Taguchi's parameter design is a method for quality improvement by making the performance fo a system robust to noise. Parameter design with dynamic characteristics has been recently the subject of much interest. This paper is concerned with a review and a generalization of the Signal-to-Noise (SN) ratio, a quality measure for parameter design with dynamic characteristics, proposed by Taguchi. We present a method for determination and analysis of the generalized SN ratio and illustrate its implementation by example.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.617-635
• /
• 2020

The purpose of this study is to discuss how to improve the maneuverability of lifting and diving for underwater vehicle's vertical motion. Therefore, to solve these problems, applied the 3-D numerical simulation, Taguchi's Design of Experiment (DOE), and intelligent parameter design methods, etc. We planned four steps as follows: firstly, we applied the 2-D flow simulation with NACA series, and then through the Taguchi's dynamic method to analyze the sensitivity (β). Secondly, take the data of pitching torque and total resistance from the Taguchi orthogonal array (L9), the ignal-to-noise ratio (SNR), and analysis each factorial contribution by ANOVA. Thirdly, used Radial Basis Function Network (RBFN) method to train the non-linear meta-modeling and found out the best factorial combination by Particle Swarm Optimization (PSO) and Weighted Percentage Reduction of Quality Loss (WPRQL). Finally, the application of the above methods gives the global optimum for multi-quality characteristics and the robust design configuration, including L/D is 9.4:1, the foreplane on the hull (Bow-2), and position of the sail is 0.25 Ls from the bow. The result shows that the total quality is improved by 86.03% in comparison with the original design.

• Journal of Korean Society for Quality Management
• /
• v.27 no.2
• /
• pp.101-111
• /
• 1999

The purpose of Taguchi's robust design lies in quality improvement by making the performance of a system robust against noise. Robust design with continuous performance characteristics has been the subject of much interest. However relatively little work has been done for discrete characteristics such as 0-1, good-medium-bad, etc. This paper is concerned with robust design of a discrete dynamic system. We first investigate the Taguchi method for robust design with discrete dynamic characteristics and discuss his standard error probability (SEP). Then we propose a generalized SEP, which makes it possible to encompass a wider class of robust design problems. An illustration is also given by example.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.2 s.191
• /
• pp.127-133
• /
• 2007

The spindle system with a built-in motor can be used to simplify the structure of machine tools, to improve the machining flexibility of machine tools, and to perform the high speed machining. To improve the competition power of price to quality, spindle design is very important. Because it possesses over 10 percent of machine tool's price. The latest machine tools have rotational frequency and excellent about might and precision cutting. So it requires static and dynamic strength in the load aspect. In conclusion, the deformation of the spindle end have to extremely small displacement in static and dynamic load. In this study, On the assumption that the bearings that are supporting 24,000rpm high-speed spindle are selected in the most optimum condition, the natural frequency and deformation of the spindle end is obtained by FEM mode analysis. The Taguchi Method was used to draw optimized condition of bearing position and it's stiffness.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.1
• /
• pp.10-17
• /
• 2009

Spindle design is very important for the improvement of the competitive power in production cost of high quality machine tools. The important factor in spindle design is not only to improve the natural frequency of spindle but also to reduce displacement of spindle end. In this paper, parameters those influence on static and dynamic stiffness of high-speed spindle have selected form preceding studies. And those selected parameters are applied to Taguchi Method. To perform FEM analysis, bearing conditions are selected with optimized condition. To know how to improve static and dynamic stiffness of machine tool spindle, natural frequency and displacement of spindle end are obtained by FEM analysis. The Taguchi Method was used to draw optimized condition of bearing position and it's stiffness. From these results, amplitude of vibration is enough good less than $3{\mu}m$ pk-pk of the spindle of 40,000rpm manufactured in this work by the optimal design.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.2
• /
• pp.278-291
• /
• 1994

A computer-aided robust design (CARD) technique is developed to search for the design variables, optimal as well as robust in the sense of Taguchi method. The CARD technique can effectively handle inequality problems by employing the variable penalty method, and dynamic problems with many design variables and/or with mixed discrete and continuous variables. It is also capable of providing contributions of each design variables to the object funtion and information for future designs. As the illustrative examples, two dynamic systems, engine mounting system and in-line feeder, are treated.

• Transactions of Materials Processing
• /
• v.19 no.2
• /
• pp.79-87
• /
• 2010

The Pipe bending process using high frequency local induction heating is an advanced technique to bend pipes with a small bending radius and a large diameter. Even though the pipe bending process is a quite widespread engineering practice, it depends heavily upon trial and error method by field engineers with several years of experience. So it is necessary to develop an integrated methodology for optimum design of the pipe bending process. During hot pipe bending using induction heating, outward wall thickness of a pipe is thinned due to tensile stress and the reduction of wall thickness is not allowed to exceed 12.5%. Taguchi method and dynamic reverse moment is proposed to maintain a reduction ratio of thickness within 12.5%, when D/t ratio is high. An application of the proposed approach was compared with those of the finite element analysis and has good in agreements.