• 제목/요약/키워드: Tactile Sensing

검색결과 57건 처리시간 0.026초

Development of Fingertip Tactile Sensor for Detecting Normal Force and Slip

  • Choi, Byung-June;Kang, Sung-Chul;Choi, Hyouk-Ryeol
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2005년도 ICCAS
    • /
    • pp.1808-1813
    • /
    • 2005
  • In this paper, we present the finger tip tactile sensor which can detect contact normal force as well as slip. The developed sensor is made of two different materials, such as polyvinylidene fluoride(PVDF) that is known as piezoelectric polymer and pressure variable resistor ink. In order to detect slip to surface of object, a PVDF strip is arranged along the normal direction in the robot finger tip and the thumb tip. The surface electrode of the PVDF strip is fabricated using silk-screening technique with silver paste. Also a thin flexible force sensor is fabricated in the form of a matrix using pressure variable resistor ink in order to sense the static force. The developed tactile sensor is physically flexible and it can be deformed three-dimensionally to any shape so that it can be placed on anywhere on the curved surface. In addition, we developed a tactile sensing system by miniaturizing the charge amplifier, in order to amplify the small signal from the sensor, and the fast signal processing unit. The sensor system is evaluated experimentally and its effectiveness is validated.

  • PDF

분포형 유연 촉각센서 시스템의 개발 (Development of a Distributed Flexible Tactile Sensor System)

  • 유기호;윤명조;정구영;권대규;이성철
    • 한국정밀공학회지
    • /
    • 제19권1호
    • /
    • pp.212-218
    • /
    • 2002
  • This research is the development of a distributed tactile sensor using PVDF film far the detection of the contact state. The prototype of the tactile sensor with 8$\times$8 taxels was fabricated using PVDF film and flexible circuitry. In the fabrication procedure, the electrode and the common electrode patterns are attached to the both side of the 28${\mu}m$ thickness PVDF film. The sensor is covered with polyester film for insulation. The signals of a contact pressure to the tactile sensor are sensed and processed in the DSP system in which the signals are digitalized and filtered. And the signals are integrated for taking the force profile. The processed signals of the output of the sensor are visualized to take the shape and force distribution of the contact object in personal computer. The usefulness of the sensor system is verified through the sensing examples.

촉각센서를 갖는 인간형 로봇손의 개발: SKKU Hand II (Development of Anthropomorphic Robot Hand with Tactile Sensor: SKKU Hand II)

  • 최병준;이상헌;강성철;최혁렬
    • 제어로봇시스템학회논문지
    • /
    • 제12권6호
    • /
    • pp.594-599
    • /
    • 2006
  • In this paper an anthropomorphic robot hand called SKKU Hand IIl is presented, which has a miniaturized fingertip tactile sensor. The thumb is designed as one part of the palm and multiplies the mobility of the palm. The fingertip tactile sensor, based on polyvinylidene fluoride (PVDF) and pressure variable resistor ink, is physically flexible enough to be deformed into any three-dimensional geometry. In order to detect incipient slip, a PVDF strip is arranged along the direction normal to the surface of the finger of the robot hand. Also, a thin flexible sensor to sense the static force as well as the contact location is fabricated into an arrayed type using pressure variable resistor ink. The driving circuits and the tactile sensing systems for the SKKU Hand II are embedded in the hand. Each driving circuit communicates with others using CAN protocol. SKKU Hand II is manufactured and its feasibility is validated through preliminary experiments.

Development of a Tactile Sensor Array with Flexible Structure Using Piezoelectric Film

  • Yu, Kee-Ho;Kwon, Tae-Gyu;Yun, Myung-Jong;Lee, Seong-Cheol
    • Journal of Mechanical Science and Technology
    • /
    • 제16권10호
    • /
    • pp.1222-1228
    • /
    • 2002
  • This research is the development of a flexible tactile sensor array for service robots using PVDF (polyvinylidene fluoride) film for the detection of a contact state in real time. The prototype of the tactile sensor which has 8${\times}$8 array using PVDF film was fabricated. In the fabrication procedure, the electrode patterns and the common electrode of the thin conductive tape were attached to both sides of the 281$\mu\textrm{m}$ thickness PVDF film using conductive adhesive. The sensor was covered with polyester film for insulation and attached to the rubber base for a stable structure. The proposed fabrication method is simple and easy to make the sensor. The sensor has the advantages in the implementing for practical applications because its structure is flexible and the shape of the each tactile element can be designed arbitrarily. The signals of a contact force to the tactile sensor were sensed and processed in the DSP system in which the signals are digitized and filtered. Finally, the signals were integrated for taking the force profile. The processed signals of the output of the sensor were visualized in a personal computer, and the shape and force distribution of the contact object were obtained. The reasonable performance for the detection of the contact state was verified through the sensing examples.

초음파 방사힘을 이용한 손바닥의 촉각 인식과 응용 (Haptic recognition of the palm using ultrasound radiation force and its application)

  • 김선애;김태양;이열음;이수연;정목근;권성재
    • 한국음향학회지
    • /
    • 제38권4호
    • /
    • pp.467-475
    • /
    • 2019
  • 고출력의 초음파는 매질을 진행하면 음향 흐름과 음향 방사힘을 만들어낸다. 공기를 매질로 하는 3차원 공간상에 음향 방사힘을 발생시키면 입체적인 촉감을 형성할 수 있으므로 공간적인 정보를 직접 피부에 촉각으로 전달할 수 있다. 본 논문은 40 kHz의 작은 초음파 송신자 154개를 묶어 오목한 형태로 배열시켜서 초음파를 송신하여 집속초점에서 음향 방사힘을 발생시켰다. 초음파 음장의 초점의 근처에서 음향 방사힘에 의한 촉각을 확인하였다. 촉각 감도를 올리기 위하여 송신 초음파를 60 Hz의 구형파로 진폭 변조를 하였다. 초음파 촉각의 응용으로 음향 방사힘이 형성되는 허공에 촉각이 감지되는 영역을 형성시켜서, 손의 위치를 지정하는 지시자로 사용하였다. 촉각이 감지되는 초점위치에 있는 손의 모양을 영상 입력으로 받아서 손가락의 개수를 기계에 피드백하는 시스템을 구현함으로써 초음파를 이용한 촉각의 유용성을 확인하였다.

분리층의 상대 변위를 이용한 고분자 미끄럼 촉각 센서 개발 (Development of Polymer Slip Tactile Sensor Using Relative Displacement of Separation Layer)

  • 김성준;최재영;문형필;최혁렬;구자춘
    • 로봇학회논문지
    • /
    • 제11권2호
    • /
    • pp.100-107
    • /
    • 2016
  • To realize a robot hand interacting like a human hand, there are many tactile sensors sensing normal force, shear force, torque, shape, roughness and temperature. This sensing signal is essential to manipulate object accurately with robot hand. In particular, slip sensors make manipulation more accurate and breakless to object. Up to now several slip sensors were developed and applied to robot hand. Many of them used complicate algorithm and signal processing with vibration data. In this paper, we developed novel principle slip sensor using separation layer. These two layers are moved from each other when slip occur. Developed sensor can sense slip signal by measuring this relative displacement between two layers. Also our principle makes slip signal decoupled from normal force and shear force without other sensors. The sensor was fabricated using the NBR(acrylo-nitrile butadiene rubber) and the Ecoflex as substrate and a paper as dielectric. To verify our sensor, slip experiment and normal force decoupling test were conducted.

Artificial muscles: Non-Stoichiometry Nature, Sensing and Actuating Properties and Tactile Sensibility

  • Otero T.F.;Lopez-Cascales J.J.;Vazquez-Arenas G.
    • KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
    • /
    • 제5B권2호
    • /
    • pp.118-122
    • /
    • 2005
  • Electro-chemo-mechanical devices or artificial muscles based on conducting polymers (CP) are presented as bilayers, CP/adhesive polymer, or as triple layers, CP/adhesive polymer/CP. Those soft and wet materials, working in aqueous solutions of a salt, mimic the composition of most organs from animals. Under electrochemical control, so working as new electrical machines, they produce continuous, reverse and elegant bending movements, mimicking those produce by animal muscles. By means of the current a perfect controls of the movement rate is attained giving soft and continuous movements. Muscles able to sense the chemical and mechanical conditions of work or muscle having tactile sense, as will be presented here, are being developed. All of them are founded on the non-stoichiometric nature of the soft and wet materials.

센스메신져 : 움직임 패턴 기반 햅틱 재생 장치 (SenseMessenger : The Haptic Sense Generator based on Motion Recording)

  • 임수현;조현상;장선연;한민수
    • 한국HCI학회:학술대회논문집
    • /
    • 한국HCI학회 2009년도 학술대회
    • /
    • pp.954-960
    • /
    • 2009
  • SenseMessenger(이하 센스메신져)는 3축 가속센서를 이용해 모션을 저장하는 컵과 2개의 모터 조합으로 만들어진 햅틱 재생 장치를 통해 저장된 모션 패턴을 사용자에게 전달하는 컵으로 이루어진 새로운 인터렉션 기법을 제안하기 위한 도구이다. 사용자의 움직임을 디지털 데이터 형식으로 패턴화하여 편심을 이용한 재생 장치를 통해 재생하였을 때, 입력(모션)과 출력(햅틱 자극) 간의 감성적인 상관관계를 입증하고, 이를 이용한 디지털 미디어 컨텐츠를 제안하였다.

  • PDF

쥐 수염 센서를 모델로 하는 수염 촉각 센서 연구 (Microphone-Based Whisker Tactile Sensors Modeling Rodent Whiskers)

  • 백승훈;김대은
    • 로봇학회논문지
    • /
    • 제4권1호
    • /
    • pp.34-42
    • /
    • 2009
  • Rodents, specially rats, can recognize distance and shape of an object and also pattern of the textures by using their whiskers. Mechanoreceptors surrounding the root of whisker in their follicle measure deflection of the whisker. Rats can move their whisker back and forth freely. This ability, called active whisking or active sensing, is one of characteristics of rat behaviours. Many researches based on the mechanism have been progressed. In this paper, we test a simple and accurate method based on deflection of the whisker: we designed biomimetic whiskers modeling after a structure of follicle using the microphone. The microphone sensor measures a mechanical vibration. Attaching an artificial whisker beam to the microphone membrane, we can detect a vibration of whisker and this can show the deflection amount of whisker indirectly.

  • PDF

미지 물체의 구속상태에 관한 실시간 추정방법 (Estimation Method for Kinematic Constraint of Unknown Object by Active Sensing)

  • 황창순
    • 대한기계학회논문집A
    • /
    • 제29권2호
    • /
    • pp.188-200
    • /
    • 2005
  • Control of a multi-fingered robotic hand is usually based on the theoretical analysis for kinematics and dynamics of fingers and of object. However, the implementation of such analyses to robotic hands is difficult because of errors and uncertainties in the real situations. This article presents the control method for estimating the kinematic constraint of an unknown object by active sensing. The experimental system has a two-fingered robotic hand suspended vertically for manipulation in the vertical plane. The fingers with three degrees-of-freedom are driven by wires directly connected to voice-coil motors without reduction gears. The fingers are equipped with three-axis force sensors and with dynamic tactile sensors that detect slippage between the fingertip surfaces and the object. In order to make an accurate estimation for the kinematic constraint of the unknown object, i.e. the constraint direction and the constraint center, four kinds of the active sensing and feedback control algorithm were developed: two position-based algorithms and two force-based algorithms. Furthermore, the compound and effective algorithm was also developed by combining two algorithms. Force sensors are mainly used to adapt errors and uncertainties encountered during the constraint estimation. Several experimental results involving the motion of lifting a finger off an unknown object are presented.