• Science of Emotion and Sensibility
• /
• v.8 no.3
• /
• pp.291-301
• /
• 2005

This study aims to understand causal relationship among preference factors - preferred design, design image, and design elements-to create interaction between artists and spectators, concerning eating and drinking table decoration which is produced with subjective representation chiefly by virtue of the authors' conceptualization and planning. As an experimental research , face-to-face personal interviews have been made in off-line setting through questionnaires. Acquired information from it has been analyzed, which results are as follows. As harmonious, warm, womanish design image, combination of pink-tone similar colors were preferred. As image adjectives highly related with design preference were 'harmonious and inharmonious' A design factor of 'harmonious' was combination of similar colors, while that of 'inharmonious' was association of mixed colors. It has been found that 'colors' have been an important factor among preference design factors. As above, a new concept for design can be established by using data-based information, along with suggesting a direction for preferred design in the field of eating and drinking table decoration. Furthermore, it will be possible to make a study of new preferred design through evaluation of quantitative spectators in this area. It is expected that such researches could give an opportunity to get satisfactory results from newly experimented designs using quantitative data even in a creative design area, as well as table decoration.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.209-211
• /
• 2007

The computational time of Stocahstic Diagonalization (SD) calculation for 2-dimensional interacting fermion systems is reduced by using several methods including symmetry operations. First, each lattice is subdivided into spin-up and spin-down lattices separately, thus allowing a bi-partite lattice. A valid basis state is then obtained from stacking up an up-spin configuration on top of a down-spin configuration. As a consequence, the memory space to be used in saving the trial basis state reduces significantly. Secondly, the matrix elements of a Hamiltonianin are reconrded in a look-up table when making basis state set. Thus the repeated calculation of the matrix elements of the Hamiltonian are avoided during SD process. Thirdly, by applying symmetry operations to the basis state set the original basis state is transformed to a new basis state whose elements are the eigenvectors of the symmetry operations. The ground state wavefunction is constructed from the elements of symmetric - bonding state - basis state set. As a result, the total number of basis states involved in SD calculation is reduced upto 50 percentage by using symmetry operations.

• Korean Institute of Interior Design Journal
• /
• v.22 no.5
• /
• pp.42-50
• /
• 2013

The upscale Korean restaurants that appeared as a way for the globalization of Korean food by introducing Western modern elements into Korean traditional elements are presenting a new direction. For this study, the researcher visited a total of ten modernized upscale Korean restaurants including five ones in each of Seoul (Dadam, Bistro Seoul, Bicena, Today, and Poom Seoul) and New York (Gaonnuri, Danji, Ban, Jung Restaurant, Korea Spoon), where the globalization of Korean food is concentrated, and the results of comparing, investigating, and analyzing the characteristics of interior and spatial design through observation, photo taking, sketches and preparing a questionnaire were as follows. First, a modernized upscale Korean restaurant was first built in New York in 2011, and then also appeared in Seoul in 2012. The Korean restaurants in New York were mostly operated by individual person, while the Korean restaurants in Seoul were operated by large corporation. Second, the spatial configuration elements were classified into the reception, garden and rooms in Seoul and into the reception, bar hall and rooms in New York depending on the function of the interior space, showing differences in the spatial configuration elements of the garden and bar. There was a difference in spatial layout; the restaurants in Seoul were room-centered, while the ones in New York were hall-centered. Third, in terms of spatial design elements, the size of the space and furniture in the reception space of the Korean restaurants in New York were smaller as compare to those in Seoul, while the restaurants in New York represented Korean atmosphere by decorating many Korean traditional elements. The Korean restaurants in New York gave consistency to the design of the hall space as compared to the restaurants in Seoul by decorating interior decorative accessories associated with the restaurant name. The Korean restaurants in Seoul decorated room space by using more traditional elements as compared to the restaurants in New York. Fourth, in terms of food design elements, the restaurants in Seoul are characterized by the introduction of Western services and table setting, while the restaurants in New York sought originality that applied foreign ways as compared to the restaurants in Seoul. The results of this study can be used as useful basic data when setting the interior spatial design guidelines for the modernized upscale Korean restaurants that advance into the world beyond Seoul and New York, and it is expected that in-depth follow-up studies would be conducted in various cities beyond Seoul and New York where there are modernized upscale Korean restaurants based on the results of this study.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.4
• /
• pp.546-550
• /
• 2014

In this research, we report all the elements are placed in the space above the patient table as a transmit coil to give optimized B1+ field for the body object. Through the simulations, we compared upper-and-lower parts combined 8 channel Tx array to upper only 8 channel Tx array and showed the utilities of B1+ shimming in multi-channel Tx body imaging at 3T. Half-cylinder shaped upper array shows weak B1+ field area around back of patient without B1+ shimming. After B1+ shimming, highly induced SAR places occurred in the arm region due to the close distance to the both end elements which were driven by very high RF current to enhance B1+ in back area. The proposed upper and lower combined array provides an enhanced homogeneous B1+ field in large ROI imaging as a result of shimming over the body size phantom. Through this research we proved the usefulness of the proposed insertional upper and lower parts combined transmit array for 3T body imaging.

• Journal of Digital Convergence
• /
• v.11 no.5
• /
• pp.105-117
• /
• 2013

Viewpoint about the quality of software is various. But, from the end-user point of view, user interface of software may be all to express the quality of software. But the detailed evaluation criteria were not established about usability evaluation method based on user interface so far, though user interface of software is the main object of usability quality characteristics. In this paper, we established a system about the method extracting and evaluating some quality characteristics elements measurable form user interface of software by analyzing the relationship between the elements constructing quality characteristics and user interface related to quality evaluation of software. We expect that this result of study will be a fundamental study adapting and evaluating to various types of user interface.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.107-110
• /
• 2003

The sheet metal shearing process is normally used in the precision elements such as semi-conductor components. In precision elements, burrs usually reduce the quality of machined parts and cause interference, jamming and misalignment during assembly procedures and because of their sharpness, they can be safety hazard to personnel. Furthermore, not only burrs are hard to predict and avoid, but also deburring, the process of removing burrs, is time-consuming and costly. In order to get the burr-free parts, therefore, we developed the precise burr measuring system using the laser. Using the X-Y precious table, we used vertical measuring method. Through the laser measurement system, we gain the minute analog signal, so this signal was amplified by the electric circuit. Finally, we gained the realtime burr data using A/D converter, PC. By introducing the novel laser measuring method which employing vertical measurement mechanism, we could get fast and precious burr data. Through the experiments, the accuracy of the developed system is proved. The burr height measured during the punching process can be used for automatic deburring and in-situ aligning.

• International Journal of Automotive Technology
• /
• v.8 no.3
• /
• pp.309-317
• /
• 2007

In this study, we conducted a vibration fatigue analysis of the lower control arm in a vehicle suspension system. The vehicle was driven during the tests so that the dynamic effects could be taken into account. The dynamic load of the frequency domain was superimposed on the frequency response analysis. We performed a virtual proving ground test using multi-body dynamics, along with a finite element analysis and fatigue life predictions. Shape optimization was also considered using the design of the experimental approach, and a response surface analysis was performed to improve the durability performance of the lower control arm. We identified the elements that had the most influence on the optimal shape of the finite element model and analyzed the sensitivity of those elements. Then the optimal points that minimized the amount of damage to the areas of interest were determined through a response surface analysis. The results suggested that the fatigue life of the model increased as its mass was not increased excessively, and demonstrated that these design procedures yielded an appropriate optimized lower control arm model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.4
• /
• pp.73-82
• /
• 1989

Various analytical procedures for the structural behavior of concrete pavement system are studied in order to identify a suitable method which will be incorperated in the pavement management system using nondestructive test and mechanistic evaluation. A typical four layered system is adopted and analyzed using 3 dimensional finite elements, plane strain elements, plates with Winkler foundation, and plates with Burmister foundation. Numerical analysis results of various structural analysis procedures are compared and analized based on displacements and stresses. It is concluded, after analysis of merits and demetits of the procedures, that Burmister foundation analysis procedure is the most sui-table procedure for implementation for the analysis of stresses and displacements because of its accuracy and simplicity.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1824-1827
• /
• 2003

The sheet metal shearing process is normally used in the precision elements such as semi-conductor components. In precision elements, burrs usually reduce the quality of machined parts and cause interference, jamming and misalignment during assembly procedures and because of their sharpness, they can be safety hazard to personnel. Furthermore, not only burrs are hard to predict and avoid, but also deburring, the process of removing burrs, is time-consuming and costly. In order to get the burr-free parts, therefore, we developed the precise burr measuring system using the laser. The laser burr measuring system consists of the laser probe, the photo detector, the achromatic doublet lens, and the rotary ＆ the X-Y table. In previous reports, we used simple vertical measuring method. But, as we used relatively bigger laser spot diameter and had the limited reflection angle, it was difficult to obtain the precise measuring results. So called, the spot size effect makes the profile of burr measured distorted and the burr height measured smaller. By introducing the novel laser measuring method which employing the achromatic lens system and the tilting mechanism, we could make the spot size smaller and get the appropriate beam direction angle. Through the experiments, the accuracy of the developed system is proved. The burr height measured during the punching process can be used for automatic deburring and in-situ aligning.

• Journal of the Korean Society for information Management
• /
• v.18 no.2
• /
• pp.57-76
• /
• 2001

As the rapid develoment of internet and information technology, the traditional library has been altered to the digital content service based on the world wide web. This paper proposes a design and implementation of an Artcle Union Catalog System(AUCS) based on metadata. The metadata set for the AUCS consists of twelve Dublin Core elements and one holdings element. The qualifiers of the proposed metadata elements are also represented. The AUCS system has an online cooperated cataloging system using the web interface or the 239.50 protocol, an union cataloging management system, and an integrated information retrieved system service. The integrated search and retrieval service of the AUCS displays not only the summary and detailed bibliographic information, but also the abstract, the table of contents, the digital content, and the copylfax service.