• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.3
• /
• pp.180-184
• /
• 2002

In this paper, the electrical properties of PVD Ta and $TaN_x$ gate electrodes on $SiO_2$ and their thermal stabilities are investigated. The results show that the work functions of $TaN_x$ gate electrode are modified by the amount of N, which is controlled by the flow rate of $N_2$during reactive sputtering process. The thermal stability of Ta and $TaN_x$ with RTO-grown $SiO_2$ gate dielectrics is examined by changes in equivalent oxide thickness (EOT), flat-band voltage ($V_{FB}$), and leakage current after post-metallization anneal at high temperature in $N_2$ambient. For a Ta gate electrode, the observed decrease in EOT and leakage current is due to the formation of a Ta-incorporated high-K layer during the high temperature annealing. Less change in EOT and leakage current is observed for $TaN_x$ gate electrode. It is also shown that the frequency dispersion and hysteresis of high frequency CV curves are improved significantly by a post-metallization anneal.

• The Journal of the Korea Contents Association
• /
• v.14 no.4
• /
• pp.237-242
• /
• 2014

In this study, surface characteristics and corrosion behaviors have been investigated in addition to Zr elements on the low elastic modulus Ti-30Ta alloy. Low elastic modulus Ti-30Ta-xZr(x : 3, 7 and 15 wt %) alloys were prepared by arc melting and then heat treated at $1000^{\circ}C$ for 24 hrs in an argon atmosphere. Microstructures of the alloys were examined by field emission scanning electron microscope(FE-SEM) and X-ray diffractometer(XRD). Electrochemical experiments were performed using a conventional three-electrode configuration with a sample working electrode, a high density carbon counter electrode and a saturated calomel reference electrode. According to the result of polarization behavior in the Ti-30Ta-xZr alloys, the current density of homogenized Ti-30Ta-15Zr in the passive region was lower than the other alloys.

• Korean Journal of Materials Research
• /
• v.1 no.4
• /
• pp.229-235
• /
• 1991

A new electrode material for $Ta_2O_5$ capacitor was developed to obtain both high dielectric constant and improved electrical properties for use in DRAM. High leakage current and low breakdown field of as-deposited $Ta_2O_5$ film on Si is due to the reduction of $Ta_2O_5$ by silicon at $Ta_2O_5$/electrode interface. $Dry-O_2$ anneal improves the electrical properties of $Ta_2O_5$ capacitor with Si electrode, but it thickens the interfacial oxide and lowers the dielectric constant, subsequently. $Ta_2O_5$ capacitor with TiN exectrode shows better electrical properties and higher dielectric constant than post heat treated $Ta_2O_5$ film on Si. No interfacial oxide layer at $Ta_2O_5$/TiN interface suggests that there\`s no Interaction between $Ta_2O_5$ and electrode. TiN is a adequate electrode material for $Ta_2O_5$ capacitor.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.187-187
• /
• 2010

In this study, we investigated the effect of electrodes on resistance switching of TaOx film. Pt, Ni, TiN, Ti and Al metal electrodes having the different oxidation degree were deposited on TaOx/Pt stack. Unipolar resistance switching behavior in Pt or Ni/TaOx/Pt MIM stacks was investigated, but bipolar resistance switching behavior in TiN, Ti or Al /TaOx/Pt MIM stacks was shown. We investigated that the voltage dependence of capacitance was decreased with higher oxidation degree of metal electrodes. Through the C-V results, we expected that linearity ($\alpha$) and quadratic ($\beta$) coefficient was reduced with an increase of interface layer between top electrode and Tantalum oxide. Transmission Electron Microscope (TEM) images depicted the thickness of interface layer formed with different oxidation degree of top electrode. Unipolar resistance switching behavior shown in lower oxidation degree of top electrode was expected to be generated by the formation of the conducting path in TaOx film. But redox reaction in interface between top electrode and Tantalum oxide may play an important role on bipolar resistance switching behavior exhibited in higher oxidation degree of top electrode. We expected that the resistance switching characteristics were determined by oxidation degree of metal electrodes.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.10a
• /
• pp.65-65
• /
• 1997

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.11a
• /
• pp.185-190
• /
• 2003

고유전물질인 $HfO_2$ 극박막에 사용될 TaN metal 전극에 대한 특성에 대한 연구를 하였다. 고유전물질인 $HfO_2$는 4" p-type wafer를 SCI cleaning후 ALD(atomic layer deposition)을 통해 $50\AA$를 증착하였다. Ff source는 TEMAH를 이용하였으며 Oxygen source는 $H_2O$를 이용하였다. 이렇게 증착한 $HfO_2$ 극박막에 Ta target을 이용하여 질소 가스를 Ar가스에 첨가하여 reactive sputtering을 통해서 TaN 전극을 증착하였다. TaN 박막의 증착두께는 a--step과 TEM을 통해서 확인하였으며 면저항은 four point probe를 이용하여 측정하였다. 이렇게 증착된 $HfO_2/TaN$구조에 대한 전기적 특성을 측정하였다.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.356-361
• /
• 2018

We investigated a hydrogen gas sensor which is available in a high temperature atmosphere. The hydrogen sensors were fabricated into a metal-oxide-semiconductor (MOS) structure made of $Pd/Ta_2O_5/SiC$, and the thin tantalum oxide ($Ta_2O_5$) layer was fabricated by rapid thermal oxidation (RTO). In the experiment, we made three types of sensors with different palladium (Pd) patterns to evaluate the effect of Pd electrode on response characteristics. As the result, the response characteristics in capacitance were improved further when the filled area of the Pd electrode became larger.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.105-106
• /
• 2008

Nanotube morphology change of Ti-Ta-Zr alloy as Zr content increase has been researched using various experimental methods. Ti-Ta-Zr(3, 7 and 15 wt%) alloys were prepared by arc melting and nano-structure controlled for 24 hr at $1000^{\circ}C$ in argon atmosphere. Formation of oxide nanotubes are conducted by anodizing a Ti-Ta-Zr alloy in $H_3PO_4$ electrolytes with small amounts of fluoride ions at room temperature. Electrochemical experiments were carried out with conventional three-electrode configuration with a platinum counter electrode and a saturated calomel reference electrode. The samples were embedded with epoxy resin, leaving a square surface area of $10mm^2$ exposed to the anodizing electrolyte, 1.0M $H_3PO_4$ containing 0.8wt% NaF.

• Journal of the Korean Vacuum Society
• /
• v.2 no.2
• /
• pp.246-254
• /
• 1993

In order to increase the capacitance of storage electrode in the DRAM capacitor, two approaches were performed. First, hemispherical and rugged poly silicon films were made by LPCVD to increase the effective surface area of storage electrode. The even surface morphology of conventional poly silicon electrode was changed into the uneven surface of hemispherical of rugged poly silicon films. Second, PECVD $Ta_2O_5$ dielectric films were deposited and thermally treated to study the dielectrical characteristics of $Ta_2O_5$ film on each electrode. MIS capacitors with $Ta_2O_5$ films were electrically characterized by I-V, C-V and TDDB measurements. As a result, the capacitance of the electrode with uneven surface were increased by a factor of 1.2~1.5 and leakage current was increased compared with those of even surface. TDDB result indicates that the electrode with uneven surface has dielectrically more degraded than that of even surface. These results can be helpful as a basic research to develop new generation DRAM capacitors with $Ta_2O_5$ films.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.9
• /
• pp.807-811
• /
• 2003

We investigated the electrical characterisitics of T $a_2$ $O_{5}$ (tantalum pentoxide) film and Ti-O/T $a_2$ $O_{5}$ film deposited on $Al_2$ $O_3$based substrate. Ta (tantalum) electrode and $Al_2$ $O_3$ substrate was used for the purpose of simplifying the manufacturing process in IPD's (integrated passive devices). Dielectric materials (T $a_2$ $O_{5}$ and Ti-O/T $a_2$ $O_{5}$ films) deposited on Ta/Ti/A $l_2$ $O_3$ were annealed at 700 $^{\circ}C$ for 60 sec. in vacuum. The XRD results showed that as-deposited T $a_2$ $O_{5}$ film possessed amorphous structure, which was transformed to crystallines by rapid thermal heat treatment. We compared the lnJ- $E^{{\frac}{1}{2}}$, C-V, C-F of both as-deposited and annealed dielectric thin films deposited on Ta bottom electrode. From this results, we concluded that the leakage current could be reduced by introducing Ti-O buffer layer and conduction mechanisms of T $a_2$ $O_{5}$ and Ti-O/T $a_2$ $O_{5}$ could be interpreted appropriately by Schottky emission effect.