• Bulletin of the Korean Chemical Society
• /
• v.10 no.2
• /
• pp.148-151
• /
• 1989

The hydrophobic interaction between tetraphenylborate (TPB$^-$) or tetrakis (4-fluorophenyl)borate (TFB$^-$) and crystal violet has been investigated in aqueous solutions by absorption spectrophotometry. Both of the anions promote the aggregation of the ion pairs formed between crystal violet and TPB$^-$ or TFB$^-$. When crystal violet and borate anion are nearly equimolar, insoluble floating aggregates can be observed. Based on the relative absorbance of H and J bands and on the effect of TX-100, TFB$^-$ is found to be more hydrophobic than TPB$^-$.

• Journal of the Korean Society of Industry Convergence
• /
• v.8 no.2
• /
• pp.97-104
• /
• 2005

Usually, propagation attenuation of millimeter wave occurs by rainfall, snowfall, temperature, effect of pressure of air. In 60GHz wave band wireless communication network, temperature change becomes big factor of propagation loss department. Also, temperature change causes disturbance of 60GHz frequency at transceiver. In this study, we used 60GHz transceiver and found propagation loss of wireless path and operating frequency disturbance characteristics. In transceiver that there is no temperature compensated device, operating frequency of TX changed by 60.865GHz at temperature of $-5^{\circ}C$, and appeared by 60.730GHz when is $50^{\circ}C$. Therefore, operating frequency change width by temperature change are about 100MHz, greatly. But, in transceiver that there is temperature compensated device, operating frequency of TX changed by 60.830GHz at temperature of $-5^{\circ}C$, and appeared by 60.710GHz when is $50^{\circ}C$. Therefore, operating frequency change width by temperature change are about 20MHz. According to these result, we constructed between buildings examination wireless site for point to point wireless communication using 60GHz band transceivers who have do temperature compensated device, and investigated data transmission characteristics about ambient temperature change. Therefore, if use transceiver that have temperature compensated device, may overcome the wireless transmission error in 60GHz band wireless communication LAN networks despite of ambient temperature change.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2344-2346
• /
• 2002

A vacuum control system has been developed for using Ethernet Multi Serial Device Severs (EMSDS) for the Pohang Accelerator Laboratory (PAL) storage ring. There are 124 vacuum ion pumps at the storage ring. It was a very important problem to solve the problem how to control such a big number of vacuum pumps distributed around the ring. After discussions, we decided to develop a serial to ethernet interrace device sever that will be mounted in the control system rack. It has a 32-bits microprocessor embedded Linux, 12 ports RS485 (or RS232) slave interface. one channel 10/100BaseTx ethernet host port, one channel UART host port, and 16 Mbytes large memory buffer. These vacuum pumps are connected to Ion-Pump serial controllers, which chop the AC current so as to control the current in the pumps. The EMSDS connect either 100BaseTx or 10BaseT ethernet networks to asynchronous serial ports for communication with serial device. It can simultaneously control up to 12 ion-pump serial controllers. 12 EMSDS are connected to a personal computer (PC) through the network. The PC can automatically control the EMSDS by sending a set of commands through the TCP/IP network. Upon receiving a command from a PC running under Windows2000 through the network, the EMSDS communicate through the stave serial interrace ports to ion-pump controller. We added some software components on the top of EPICS (Experimental Physics and Industrial Control System) toolkit.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.17 no.1
• /
• pp.18-28
• /
• 1991

Spectral behaviors of cationic dye, crystal violet(CV), in aqueous solution and with varying concentrations of Triton X-100(TX-100), sodium dodecylsulfate (SDS) and cetyl trimethyl amonium bromide(CTAB) were studied. The characteristic changes of the absorption spectra observed in the dye-SDS interacting systems with the SDS concentration are analyzed. The behaviors of both a- and J-bands of the each componet dye suggest that the following four sequential steps are occurring : the formation of dye-SDS complex, the stacking of the dye molecules arising from the association of the dye-SDS complex, breaking of the dye stacking due to the formation of micelles, redistribution of the dye molecules in the surface of micelles at high SDS concentration.

• Journal of environmental and Sanitary engineering
• /
• v.5 no.2
• /
• pp.53-62
• /
• 1990

There has been considerable organisms the most indicative of the sanitary quality of food products. Of the suggested indices of sanitary quality of foods are coliform organism and SPC. In addition to the usual index organisms on fish products it is also necessary to determining the sanitary quality The authors have tested with 282 fish products (spring : 39, summer : 109, autumn : 112, winter . 22) 1. The range of microbial organism in fish products are as follows Spring : SPC is $13{\times}10^3\; to\; 50{\times}10^8/g$, coliform group is $16{\times}10^2\; to\; 48{\times}10^8/g$ and 2. coli is 50 to $22{\times}10^4/100g$. Summer : SPC is 70 to$64{\times}10^9/g$. coliform group is 25 to $26{\times}10^8/g$ and E. coli is 20 to $22{\times}10^4/100g$. Autumn : SPC is $10{\times}10^3\; to\; 46{\times}10^8/g$, coliform group is 200 to $20{\times}10^5/g$ and E. coli is 20 to $22{\times}10^4/100g$. Winter : SPC is $30{\times}10^3\; to\;30{\times}10^8/g$. coliform group is $21{\times}10^2\;to\;16{\times}10^3/g$ and E. coli is 20 to 790/100g. Salmonella and Staphylococcus species were not in 282 fish products.

• Clean Technology
• /
• v.11 no.1
• /
• pp.1-12
• /
• 2005

In these studies, semibatch emulsion copolymerization of n-butyl acrylate (n-BA) as adhesive component and methyl metacrylate (MMA) as coagulant component was carried out in order to investigate the role of surfactant in aqueous phase for polymer cement. It was found that the particle size and concentration of final polymer are affected by surfactant type used. The effect of nonionic surfactants was shown in the decrease of polymer emulsion concentration and small emulsion particle in order of LE-50, NP-50 > CE-50, Tween 20 > TX-405 > Brij 35. In LE and NP (n=7-50) as nonionic surfactant, it could be obtained the stable polymer emulsion of 40% in aqueous phase with average particle size of 250-320 nm using over n=30. On the other hand, the effect of surfactant type in initial reactor charge was shown that when SDS as ionic surfactant was used, the polymer emulsion concentration was constant irrespective of the amount used, whereas CTAB as cationic surfactant and HN-100 as reactive surfactant were shown a tendency to the decrease of that. The effect surfactant type on final polymer particle size was shown in decrease by the order of SDS > CTAB > HN-100.

• Membrane Journal
• /
• v.27 no.2
• /
• pp.154-166
• /
• 2017

Polymeric films for gas barrier applications such as food packaging and electronic devices have attracted great interest due to their cheap, light and easy processability among gas barrier materials. Especially in electronic devices, extremely low gas permeance is necessary for maintaining the device performance. However, current polymeric barrier films still suffer from relatively high gas permeance than other materials. Therefore, there have been strong needs to enhance the gas barrier performance of polymeric barrier films while keep their own advantages. Recently, graphene is highlighted as a 2D-layered material for gas barrier applications. However, owing to the poor workability and difficulty to produce in engineering scale, graphene oxide (GO) is on the rise. GO consists of oxygen-containing functional groups on surface with intrinsic 2D-layered structure and high aspect ratio, and it can be well-dispersed in aqueous polar solvents like water, resulting in scalable mass production. Here, we prepared GO incorporated polyimide (PI) nanocomposites. PI is widely used barrier polymer with high mechanical strength and thermal and chemical stability. We demonstrated that PI/GO nanocomposites could perform as a gas barrier. Furthermore, surfactants (Triton X-100 (TX) and Sodium deoxycholate (SDC)) are introduced to enhance the gas barrier performance by improving the degree of dispersion of GO in PI matrix. As a result, TX enhanced the gas barrier performance of PI/GO nanocomposites which is similar to predicted value. This finding will provide new insight to polymer nanocomposites for gas barrier applications.

• The Korea Journal of Herbology
• /
• v.30 no.5
• /
• pp.15-21
• /
• 2015

Objectives : Methicillin-resistantStaphylococcus aureus(MRSA) is a human pathogen. New antibacterial agents are needed to treat MRSA-related infections. This study investigated the antibacterial activity of EtOH 70% extracts ofTonghyeonipal-dan(THD) which prescription is composed of oriental medicine against MRSA.Methods : The antibacterial activity of THD was evaluated against MRSA strains by using the Disc diffusion method, broth microdilution method, Checkerboard dilution test, and Time-kill test; its mechanism of action was investigated by bacteriolysis, detergent or ATPase inhibitors were used.Results : The minimum inhibitory concentration (MIC) of THD is 1,000~2,000 μg/mL against MRSA. In the checkerboard dilution test, fractional inhibitory concentration index (FICI) of THD in combination with antibiotics indicated synergy or partial synergism againstS. aureus. Furthermore, a time-kill assay showed that the growth of the tasted bacteria was considerably inhibited after 24 h of treatment with the combination of THD with selected antibiotics. For measurement of cell membrane permeability, THD 500 μg/mL along with concentration of Triton X-100 (TX) and Tris-(hydroxymethyl) aminomethane (TRIS) were used. In the other hand, N,N-dicyclohexylcarbodimide (DCCD) and Sodium azide (NaN3) were used as an inhibitor of ATPase. TX, TRIS, DCCD and NaN3 cooperation againstS. aureusshowed synergistic action.Conclusions : Accordingly, antimicrobial activity of THD was affected by cell membrane and inhibitor of ATPase were assessed. These results suggest that THD has antibacterial activity, and that THD extract offers great potential as a natural antibiotic against MRSA.

• Journal of Korean Medicine Rehabilitation
• /
• v.30 no.1
• /
• pp.31-45
• /
• 2020

Objectives In this study, we investigated the antimicrobial activity of a 70% ethanol extract of Maneung-hwan (MEH), which is prescribed by practitioners of oriental medicine for use against methicillin-resistant Staphylococcus aureus (MRSA). Methods The antibacterial activity of MEH against MRSA strains was evaluated using the disc diffusion method, broth microdilution method (minimal inhibitory concentration, MIC), checkerboard dilution test, and time-kill test. The mechanism of action of MEH was investigated by bacteriolysis using detergents or ATPase inhibitors Additionally, mRNA and protein expression were investigated by quantitative reverse transcription-polymerase chain reaction and western blot assay, respectively. Results The MIC of MEH was 25~1,600 ㎍/mL against all the tested bacterial strains. We showed that MEH extract exerts strong antibacterial activity. In the checkerboard dilution test, the fractional inhibitory concentration index of MEH in combination with antibiotics indicated synergism or partial synergism against S. aureus. The time-kill study indicated that the growth of the tested bacteria was considerably inhibited after a 24-h treatment with MEH and selected antibiotics. To measure the cell membrane permeability, MEH (3.9 ㎍/mL) was combined with Triton X-100 (TX) at various concentrations N,N-dicyclohexylcarbodimide (DCCD) was also tested as an ATPase inhibitor. TX and DCCD cooperation against S. aureus exhibited synergistic action. Accordingly, the antimicrobial activity of MEH in the context of cell membrane rupture and ATPase inhibition was assessed. Additionally, the expression of genes and proteins associated with resistance was reduced after exposing MRSA to MEH. Conclusions These results suggest that MEH possesses antibacterial activity and acts as a potential natural antibiotic against MRSA.

• Journal of radiological science and technology
• /
• v.46 no.6
• /
• pp.519-526
• /
• 2023

This study was intended to evaluate the shielding rate of radiation shields manufactured using 3D printers that have recently been used in various fields by comparing them with existing shields made of lead, and to find out their applicability through experiments. A 3D printer shield made of tungsten filament 1 mm, 2 mm, 4 mm shield, RNS-TX (nanotungsten) 1.1 mm, lead 0.2 mmPb, and 1mmPb were exposed to ^99mTc, ¹⁸F, and ²⁰¹TI for 15, 30, 45 minutes, and 60 minutes after measuring cumulative dose three times. Based on this, the shielding rate of each shield was calculated based on the dose in the absence of the shield. In addition, ^99mTc, ¹⁸F, and ²⁰¹TI were located 100 cm away from the phantom in which the OSLD nano Dot device was inserted, and if there was no shield for 60 minutes, the dose of thyroid was measured using 1.0 mm of lead shield, 1.1 mm of RNS-TX shield, and 2 mm of tungsten shield made by 3D printer. The use of shields during radiation shielding emitted from open radiation sources all resulted in a reduction in dose. The radiation dose emitted from the radionuclides under the experiment was all reduced when the shield was used. This study has been confirmed that tungsten is a material that can replace lead due to its excellent performance and efficiency as shield, and that it even shows the possibility of manufacturing a customized shield using 3D printer.