• Proceedings of the KIEE Conference
• /
• 2005.05b
• /
• pp.67-70
• /
• 2005

HVAC transmission lines must be designed to satisfy environmental regulations. Therefore it is necessary to pre-evaluate environmental problems for transmission line designer using prediction program. In this study, environment design software, TLCALC 2001 for transmission lines was developed as a comprehensive window program. It has 6 modules that are audible noise, radio noise, television noise, magnetic field, electric field and conductor surface gradient. TLCALC 2001 solved a few problems in use of the existing foreign tools and took several advantages. Experienced designers can get the results of calculation within about 15 minutes. Because the use of TLCALC 2001 is easy and practical, this program will be usefully applied to the environmental friendly design and construction of HVAC transmission lines. In the future, it is expected that public complaints and social environmental cost will be reduced by the use of TLCALC 2001.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.469-471
• /
• 2002

HVAC transmission lines must be designed to satisfy environmental regulations. Therefore it is necessary to pre-evaluate environmental problems for transmission line designer using prediction program. In this study, environment design software, TLCALC 2001 for transmission lines was developed as a comprehensive window program. It has 6 modules that are audible noise, radio noise, television noise, magnetic field, electric field and conductor surface gradient TLCALC 2001 solved a few problems in use of the existing foreign tools and took several advantages. Experienced designers can get the results of calculation within about 15 minutes. Because the use of TLCALC 2001 is easy and practical, this program will be usefully applied to the environmental friendly design and construction of HVAC transmission lines. In the future, it is expected that public complaints and social environmental cost will be reduced by the use of TLCALC 2001.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5C
• /
• pp.393-402
• /
• 2012

In this study, we propose a signal processing algorithm to measure the arousal level of a human subject using a PPG(Photoplethysmography) sensor. From the measured PPG signals, the arousal level is determined by PPI(Pulse to Pulse Interval) and discrete-time signal processing. We ran psychophysical experiments displaying visual stimuli on TV display while measuring PPG signal from a finger, where the nature landscape scenes were used for restorative effect, and the urban environments were used to stimulate the stress. However, the measured PPG signals may include noise due to subject movement and measurement error, which results in incorrect detections. In this paper, to mitigate the noise impact on stimulus detection, we propose a detecting algorithm using digital signal processing methods and statistics of measured signals. A filter is adopted to remove a high frequency noise and adaptively designed taking into account the statistics of the measured PPG signals. Moreover we employ a hysteresis method to reduce the distortion of PPI in decision of emotional. Via experiment, we show that the proposed scheme reduces signal noise and improves stimulus detection.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.47-50
• /
• 2010

최근 3D HDTV (3-Dimensional High Definition Television)에 대한 연구가 활발히 진행되고 있다. 국내에서도 3D HDTV 방송 서비스를 위하여 기존의 ATSC (Advanced Television Systems Committee) 8-VSB (8-Vestigial Side Band) 시스템을 수정하려는 연구가 진행되고 있다. 그 중에서도 프레임 생성 과정에서 프레임 헤드 부분에 PN (Pseudo-Noise)심볼을 사용하는 새로운 시스템의 개념을 제안하고, 이 시스템을 수정된 ATSC 시스템이라 부를 것이다. 수정된 ATSC 시스템은 기존 ATSC 8-VSB 시스템에서 사용되던 VSB 변조방식을 사용한다. 본 논문에서는 수정된 ATSC 시스템에 적용 가능한 반송파 주파수 복구 방식을 제안한다. 제안된 반송파 주파수 복구 방식은 Fitz 알고리즘을 사용하는 거친 주파수 복구부와 간단한 PN심볼 상관 알고리즘을 사용하는 미세 주파수 복구부로 구성된다. 그리고 진폭만을 변조하여 사용하는 VSB 변조 방식의 경우 심볼 정보가 동위상 채널에만 존재하고, 직교위상 채널은 단순히 동위상 채널의 힐버트 변환된 값에 지나지 않는다. 그러므로 VSB 변조된 심볼은 QAM 변조된 심볼 처럼 일정한 배열을 가지지 않고, 반송파 주파수 옵셋에 더욱 민감하게 된다. 이를 극복하기 위하여 수신된 PN심볼에 대한 위상 보정 과정을 수행하고, 이 과정은 수정된 ATSC 시스템의 반송파 주파수 복구 시 성능을 향상 시킨다.

• Journal of Korea Multimedia Society
• /
• v.13 no.9
• /
• pp.1322-1328
• /
• 2010

Recently, keyword spotting system is greatly in the limelight as UI(User Interface) technology of ubiquitous home network system. Keyword spotting system is vulnerable to non-stationary noises such as TV, radio, dialogue. Especially, speech recognition rate goes down drastically under the embedded DSP(Digital Signal Processor) environments because it is relatively low in the computational capability to process input speech in real-time. In this paper, we propose a new keyword spotting system using the call-command method, which is consisted of small number of recognition networks. We select the call-command such as 'narae', 'home manager' and compose the small network as a token which is consisted of silence with the noise and call commands to carry the real-time recognition continuously for input speeches.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.4
• /
• pp.499-504
• /
• 2017

A UHF CMOS variable gain low-noise amplifier (LNA) is designed for mobile digital TV tuners. The proposed LNA adopts a feedback topology to cover a wide frequency range from 474 to 868 MHz, and it supports the notch filter function for the interoperability with the GSM terminal. In order to handle harmonic distortion by strong interferers, the gain of the proposed LNA is step-controlled while keeping almost the same input impedance. The proposed LNA is implemented in a $0.11{\mu}m$ CMOS process and consumes 6 mA at a 1.5 V supply voltage. In the measurement, it shows the power gain of greater than 16 dB, NF of less than 1.7 dB, and IIP3 of greater than -1.7 dBm for the UHF band.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.1 no.1
• /
• pp.71-76
• /
• 1997

In this paper, we describe simulation results of subjective assessments with bit rate variation of multi-channel audio codec system for the services of HDTV satellite broadcasting services. Based on this experiment results, we also describe the specification and subjective performance results for 4-channel audio codec. For multi-channel, bit rates are 384,320,256,128kbps and the results show that 320kbps bit rate is needed to compare with the original and the reproduced signal. Based on this, for 384kbps for 4-channel audio codec, three items that achieve a diffgrade worse than -0.5 are due to the noise of analog output module. This system is satisfied for the audio codec of the HDTV system.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.1120-1122
• /
• 1999

In the design of vehicle glass antenna system, it is essential to use preamplifier between the glass antenna and the TV set, since glass antenna has low gain. In this paper, the preamplifier has been designed in the frequency range from 50MHz to 900MHz with the gam of 10dB. A negative feedback technique has been employed for the wideband characteristics of the amplifler. A DC block capacitor is also used to obtain flat gain response in the wide frequency range. The experimental result shows 1dB ripple in 9dB gain and 0.5dB ripple in 3dB noise figure. The test results were compared with those of the performed by the EEsof-touchstone.

• Smart Media Journal
• /
• v.3 no.2
• /
• pp.14-19
• /
• 2014

This paper presents a novel approach to recognize human gestures using k-NN and DTW based on Con tactless Electronic Potential Sensor(CEPS) in the smart devices such as smart TV and smart-phone in the proposed method, we used a Kalman filter to remove noise on gesture signal from CEPS and a PCA algorithm is utilized for reducing the dimensionality of gesture signal without data losses. And then in order to categorize gesture signals, k-NN classifier with DTW distance measure is considered. In the experimental result, we evaluate recognition performance with CEPS gesutres signal form the above two types of smart devices, and we can successfully identify five different gestures with more than 90% of recognition accuracy.

• Journal of Broadcast Engineering
• /
• v.3 no.1
• /
• pp.69-84
• /
• 1998

In digital broadcasting, services such as digital satellite TV, cable TV and digital terrestrial TV, several video programs are compressed by MPEG-2, and then simultaneously transmitted over a conventional CBR (Constant Bit Rate) broadcasting channel. In this paper, we propose a joint quality control scheme to be able to accurately control the relative picture quality among the video programs, which is achieved by simdt;,nL'Ously controlling the video encoders to generate the VBR (Variable Bit Rate) compressed video streams. Our quality control scheme can prevent the video buffer overflow and underflow by total target bit allocation process, and also exactly control the relative picture quality in terms of PSNR (Peak Signal to Noise Ratio) between some programs requiring higher picture quality and others by rate-distortion modification. Furthermore we present a rate-distortion estimation method for MPEG-2 video, which is base of our joint quality control, and verify its performance by experiments. The most attractive features of this estimation method are as follows: 1) computational complexity is low because main operation for the estimation is to calculate the histogram of OCT coefficients into quantizer; 2) estimation results are very accurate enough to be applied to the practical MPEG-2 video coding applications. Simulation results show that the proposed joint quality control scheme accurately controls the relative picture quality among the video progran1s transmitted over a single channel as well as provides more consistent and higher picture quality than independent coding scheme that encodes each program independently.