• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.2
• /
• pp.125-130
• /
• 2013

According to the law revision of TPMS mounting obligations in Korea, researches about energy harvester which is the alternative of the battery are actively performed by many groups. Because WSN (Wireless Sensor Network) has the proposition of "Install and forget" and the power supplier also has the same performance as the vehicle's lifetime. In this paper, electromagnetic induction type of energy harvester through the relative motion between the rotating wheel and the fixed brake disc is introduced by using the most efficient source as the rotating motion in the view of vehicle's mechanism. The coil on the wheel and the permanent magnet at the brake disc are arranged in several ways. These various arrangements are the number of coil turns are consisted of design variables. By using the orthogonal array to reduce the experimental cost, the optimal composition is verified through the experiment. Finally the validity of the module is considered by measuring the level of storable electrical energy.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1317-1318
• /
• 2011

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.5
• /
• pp.115-124
• /
• 2018

Thermal protection materials (TPMs) are very crucial for the survival of any re-entry space vehicles. One of the systems used for rigorous validation of TPMs is an enhanced Huel type segmented arc-heated plasma wind tunnel. A 0.4 MW class arc-heated plasma wind tunnel has been constructed at Chonbuk National University which is capable of producing high enthalpy supersonic flow. In this paper we have studied the characteristics of plasma flow according to power and mass flow parameters.

• Tunnel and Underground Space
• /
• v.15 no.1 s.54
• /
• pp.1-8
• /
• 2005

Measurement of convergence was/is carried out manually throughout the world for tunnels under construction. However, manual method has certain limitations in terms of applicability for the tunnels in operation. This paper describes state of the art of convergence monitoring systems which are available for measuring displacement of existing tunnels. These technologies are analyzed as follows: 1 The Sofo system using the fiber optic sensors has been applied to the stress measurement of the tunnel lining. It has not yet been used for the monitoring of tunnel convergence because of its cost and reliability 2. A TPMS(Tunnel Profile Monitoring System) using tilt sensors and displacement sensors is used for the convergence monitoring of highway tunnels, subway tunnels and underground ducts. 3. A BCS(Bassett Convergence System) using a pair of tilt sensors can be used for the convergence monitoring of tunnels, however the accuracy of the measurement has to be improved because it uses AC input voltage during data acquisition. The system has to be validated before it can be applied to the tunnels in operation. Convergence monitoring systems using TPMS and/or BCS are recommended to be evaluated and improved by a series or tests in tunnels under construction in order to be applied to the main measuring section and the tunnels in operation.

• Journal of the Korean Society of Systems Engineering
• /
• v.3 no.2
• /
• pp.3-8
• /
• 2007

Technical Measures includes Measures of Effectiveness(MOEs), Key Performance Parameters(KPPs), Measures of Performance(MOPs) and/or Technical Performance Measures(TPMs). Technical measurement is the set of measurement activities used to provide supplier and/ or acquirer insight into progress in the definition and development of the technical solution, ongoing assessment of the associated risks and issues. This paper describes how technical measures can be applied, using the measurement process described in the previous study and shows the relationship between the various types of technical measures.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.747-747
• /
• 2006

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.6
• /
• pp.752-755
• /
• 2012

In this paper, the rectangular spiral shaped antenna is designed and fabricated for 433 MHz TPMS. Proposed antenna has the -10 dB impedance bandwidth of 23 MHz(427~450 MHz). The antenna is fabricated with the size of $5mm(W){\times}23mm(D){\times}10mm(H)$ by brass material. Return loss is below -10 dB at 433 MHz${\pm}$10 MHz mounted tire wheel and not mounted both. The radiation power is -44.21 dBm without wheel and -50.0 dBm installed wheel. The proposed antenna can be practical use through data transmission test results.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.39-41
• /
• 2003

본 논문은 TPMS(Tire Pressure Monitoring System) 개발을 목적으로 압력센서를 무전원/무선 표면탄성파 센서를 이용하여 측정할 수 있는 방법을 연구한 것이다. Touch mode 방식의 압력센서의 경우 Touch down 되었을 때 정전용량은 큰 변화를 가지며 이후 압력의 증가에 대해 선형적으로 증가한다는 것을 이론적인 계산을 통해서 확인하였다. 또한 이와 같은 특성은 표면탄성파 센서의 응답 주파수의 변화를 통해 측정이 가능하다는 이론적인 모델링을 제시하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.7
• /
• pp.834-850
• /
• 2011

In this paper, a novel tissue engineering scaffold design method based on triply periodic minimal surface (TPMS) is proposed. After generating the hexahedral elements for a 3D anatomical shape using the distance field algorithm, the unit cell libraries composed of triply periodic minimal surfaces are mapped into the subdivided hexahedral elements using the shape function widely used in the finite element method. In addition, a heterogeneous implicit solid representation method is introduced to design a 3D (Three-dimensional) bio-mimetic scaffold for tissue engineering from a sequence of computed tomography (CT) medical image data. CT image of a human spine bone is used as the case study for designing a 3D bio-mimetic scaffold model from CT image data.

• 월간 기계설비
• /
• no.6 s.191
• /
• pp.53-58
• /
• 2006

1969년 락희개발(주)로 건설업을 시작한 GS건설은 지난 2005년 명칭을 새롭게 바꾼 후 건축, 토목, 플랜트 환경 등에 다양한 사업을 벌이고 있다. GS건설은 지난해 수주 8조2400억원, 매출 5조6300억원을 달성해 수주, 매출업계 1위에 올랐으며 특히 수주잔액이 총 25조 6000천억원으로 향후 4~6년치 매출을 확보해 건설업계의 정상을 질주하고 있다. 이러한 추진력은 올해도 이어져 수주 8조8000억원, 매출 6조원의 신장된 목표를 설정하여 건설업계 1위를 수성하기 위해 최선을 다하고 있다. 또한 GS건설은 탄탄한 재무구조와 높은 브랜드 이미지, 우수한 기술력을 바탕으로 각 분야에서 지속적인 성장을 거듭, 건설업계에 서 새로운 Leading Company로 자리매김할 계획이다. GS건설은 지난해 6월 자재 입출고 현황 등을 매일 전산으로 체크해 공기, 비용, 안전율, 불량률을 획기적으로 줄일 수 있는 종합 건설관리시스템(TPMS)을 도입하여 기술수준과 관리 능력을 향상시킴으로써 차별화된 경영과 함께 시스템 경영으로 Cost Innovation을 꾀하고 있다. 이와 함께 GS건설은 TPMS를 내년 말까지 전 사업장에 정착시킴으로써 시공의 성역화 및 과학화를 주도할 계획이다.