1 |
Melchels, F. P. W., Bertoldi, K., Gabbielli, R., Velders, A. H. and Feijen, J., "Mathematically defined tissue engineering scaffold architectures prepared by stereolithography," Biomaterials, Vol. 31, No. 27, pp. 6909-6916, 2010.
DOI
ScienceOn
|
2 |
Yoo, D. J., "Computer-aided Porous Scaffold Design for Tissue Engineering Using Triply Periodic Minimal Surfaces," Int. J. Precis. Eng. Manuf., Vol. 12, No. 1, pp. 61-71, 2011.
DOI
|
3 |
Yoo, D. J., "Filling Holes in Large Polygon Models Using an Implicit Surface Scheme and the Domain Decomposition Method," Int. J. Precis. Eng. Manuf., Vol. 8, No. 1, pp. 3-10, 2007.
|
4 |
Sogutlu, S. and Koc, B., "Stochastic Modeling of Tissue Engineering Scaffolds with Varying Porosity Levels," Computer-Aided Design & Applications, Vol. 4, No. 5, pp. 661-670, 2007.
DOI
|
5 |
Cai, S. and Xi, J., "A control approach for pore size distribution in the bone scaffold based on the hexahedral mesh refinement," Computer-Aided Design, Vol. 40, No. 10-11, pp. 1040-1050, 2008.
DOI
ScienceOn
|
6 |
Rajagopalan, S. and Robb, R. A., "Schwarz meets Schwann: Design and fabrication of biomorphic and durataxic tissue engineering scaffolds," Medical Image Analysis, Vol. 10, No. 5, pp. 693-712, 2006.
DOI
ScienceOn
|
7 |
Leong, K. F., Chua, C. K., Sudarmadji, N. and Yeong, W. Y., "Engineering functionally graded tissue engineering scaffolds," Journal of the Mechanical Behavior of Biomedical Materials, Vol. 1, No. 2, pp. 140-152, 2008.
DOI
ScienceOn
|
8 |
Wettergreen, M. A., Bucklen, B. S., Starly, B., Yuksel, E., Sun, W. and Liebschner, M. A. K., "Creation of a unit block library of architectures for use in assembled scaffold engineering," Computer-Aided Design, Vol. 37, No. 11, pp. 1141-1149, 2005.
DOI
ScienceOn
|
9 |
Tuan, H. S. and Hutmacher, D. W., "Application of micro CT and computation modeling in bone tissue engineering," Computer-Aided Design, Vol. 37, No.11, pp. 1151-1161, 2005.
DOI
ScienceOn
|
10 |
Naing, M. W., Chua, C. K., Leong, K. F. and Wang, Y., "Fabrication of customized scaffolds using computer-aided design and rapid prototyping techniques," Rapid Prototyping Journal, Vol. 11, No. 4, pp. 249-259, 2005.
DOI
ScienceOn
|
11 |
Hollister, S. J., "Porous scaffold design for tissue engineering," Nature Materials, Vol. 4, No. 7, pp. 518-524, 2005.
DOI
ScienceOn
|
12 |
Landers, R., Pfister, A., Hubner, U., John, H., Schmelzeisen, R. and Mulhaupt, R., "Fabrication of soft tissue engineering scaffolds by means of rapid prototyping techniques," J. Mater. Sci., Vol. 37, No. 15, pp. 3107-3116, 2002.
DOI
ScienceOn
|
13 |
Rimell, J. T. and Marquis, P. M., "Selective laser sintering of ultra high molecular weight polyethylene for clinical applications," J. Biomed. Mater. Res., Vol. 53, No. 4, pp. 414-420, 2000.
DOI
ScienceOn
|
14 |
Hutmacher, D. W., Sittinger, M. and Risbud, M. V., "Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems," Trends in Biotechnology, Vol. 22, No. 7, pp. 354-362, 2004.
DOI
ScienceOn
|
15 |
Gomez, C., Shokoufandeh, A. and Sun, W., "Unit- Cell Based Design and Modeling in Tissue Engineering Applications," Computer-Aided Design & Applications, Vol. 4, No. 5, pp. 649-659, 2007.
DOI
|
16 |
Starly, B., Lau, W., Bradbury, T. and Sun, W., "Internal architecture design and freeform fabrication of tissue replacement structures," Computer-Aided Design, Vol. 38, No. 2, pp. 115-124, 2006.
DOI
ScienceOn
|
17 |
Adachi, T., Osako, Y., Tanaka, M., Hojo, M. and Hollister, S. J., "Framework for optimal design of porous scaffold microstructure by computational simulation of bone generation," Biomaterials, Vol. 27, No. 21, pp. 3964-3972, 2006.
DOI
ScienceOn
|
18 |
Tsang, V. L. and Bhatia, S. N., "Three-dimensional tissue fabrication," Adv. Drug. Deliv. Rev., Vol. 56, No. 11, pp. 1635-1647, 2004.
DOI
ScienceOn
|
19 |
Sun, W., Starly, B., Nam, J. and Darling, A., "Bio- CAD modeling and its applications in computer-aided tissue engineering," Computer-Aided Design, Vol. 37, No. 11, pp. 1097-1114, 2005.
DOI
ScienceOn
|
20 |
Hutmacher, D. W., "Scaffold design and fabrication technologies for engineering tissues - state of the art and future perspectives," J. Biomater. Sci. Polym. Ed., Vol. 12, No. 1, pp. 107-124, 2001.
DOI
ScienceOn
|
21 |
Hutmacher, D. W., "Scaffolds in tissue engineering bone and cartilage," Biomaterials, Vol. 21, No. 24, pp. 2529-2543, 2000.
DOI
ScienceOn
|
22 |
Yang, S., Leong, K. F., Du, Z. and Chua, C. K., "The design of scaffolds for use in tissue engineering. Part II. Rapid prototyping techniques," Tissue Eng., Vol. 8, No. 1, pp. 1-11, 2002.
DOI
ScienceOn
|
23 |
Zein, I., Hutmacher, D. W., Tan, K. C. and Teoh, S. H., "Fused deposition modeling of novel scaffold architectures for tissue engineering applications," Biomaterials, Vol. 23, No. 4, pp. 1169-1185, 2002.
DOI
ScienceOn
|
24 |
Landers, R., Hubner, U., Schmelzeisen, R. and Mulhaupt, R., "Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering," Biomaterials. Vol. 23, No. 23, pp. 4437-4447, 2002.
DOI
ScienceOn
|
25 |
Cooke, M. N., Fisher, J. P., Dean, D., Rimnac, C. and Mikos, A. G., "Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth," J. Biomed. Mater. Res. B : Appl. Biomater., Vol. 64B, No. 2, pp. 65-69, 2003.
DOI
|
26 |
Vozzi, G., Flaim, C., Ahluwalia, A. and Bhatia, S., "Fabrication of PLGA scaffolds using soft lithography and microsyringe deposition," Biomaterials, Vol. 24, No. 14, pp. 2533-2540, 2003.
DOI
ScienceOn
|
27 |
Vozzi, G., "Microsyringe-based deposition of twodimensional and three-dimensional polymer scaffolds with a well-defined geometry for application to tissue engineering," Tissue Eng., Vol. 8, No. 6, pp. 1089-1098, 2002.
DOI
ScienceOn
|
28 |
Lin, A. S., Barrows, T. H., Cartmell, S. H. and Guldberg, R. E., "Microarchitectural and mechanical characterization of oriented porous polymer scaffolds," Biomaterials, Vol. 24, No. 3, pp. 481-489, 2003.
DOI
ScienceOn
|
29 |
Rohner, D., Hutmacher, D. W., Cheng, T. K., Oberholzer, M. and Hammer, B., "In vivo efficacy of bone-marrow-coated polycaprolactone scaffolds for the reconstruction of orbital defects in the pig," J. Biomed. Mater. Res. B : Appl. Biomater., Vol. 66, No. 2, pp. 574-580, 2003.
|
30 |
Chu, T. M., Halloran, J. W., Hollister, S. J. and Feinberg, S. E., "Hydroxyapatite implants with designed internal architecture," J. Mater. Sci. Mater. Med., Vol. 12, No. 6, pp. 471-478, 2001.
DOI
ScienceOn
|
31 |
Hollister, S. J., Maddox, R. D. and Taboas, J. M., "Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints," Biomaterials, Vol. 23, No. 20, pp. 4095-4103, 2002.
DOI
ScienceOn
|
32 |
Karageorgiou, V. and Kaplan, D., "Porosity of 3D biomaterial scaffolds and osteogenesis," Biomaterials, Vol. 26, No. 27, pp. 5474-5491, 2005.
DOI
ScienceOn
|
33 |
Taylor, M. S., Daniels, A. U., Andriano, K. P. and Heller, J., "Six bioabsorbable polymers: in vitro acute toxicity of accumulated degradation products," J. Appl. Biomater., Vol. 5, No. 2, pp. 151-157, 1994.
DOI
ScienceOn
|
34 |
Rubin, J. P. and Yaremchuk, M. J., "Complications and toxicities of implantable biomaterials used in facial reconstructive and aesthetic surgery: a comprehensive review of the literature," Plast. Reconstr. Surg., Vol. 100, No. 5, pp. 1336-1353, 1997.
DOI
ScienceOn
|
35 |
Yoo, D. J. and Kwon, H. H., "Shape Reconstruction, Shape Manipulation, and Direct Generation of Input Data from Point Clouds for Rapid Prototyping," Int. J. Precis. Eng. Manuf., Vol. 10, No. 1, pp. 103-113, 2009.
DOI
|
36 |
Fisher, J. P., Holland, T. A., Dean, D., Engel, P. S. and Mikos, A. G., "Synthesis and properties of photocross-linked poly(propylene fumarate) scaffolds," J. Biomater. Sci. Polym. Ed., Vol. 12, No. 6, pp. 673-687, 2001.
DOI
ScienceOn
|
37 |
Lal, P. and Sun, W., "Computer modeling approach for microsphere-packed bone scaffold," Computer- Aided Design, Vol. 36, No. 5, pp. 487-497, 2004.
DOI
ScienceOn
|
38 |
Yoo, D. J., "Three-dimensional Human Body Model Reconstruction and Manufacturing from CT Medical Image Data Using a Heterogeneous Implicit Solid Based Approach," Int. J. Precis. Eng. Manuf., Vol. 12, No. 2, pp. 293-301, 2011.
DOI
ScienceOn
|
39 |
Yoo, D. J., "Three-dimensional Morphing of Similar Shapes Using a Template Mesh," Int. J. Precis. Eng. Manuf., Vol. 10, No. 1, pp. 55-66, 2009.
DOI
|
40 |
Yoo, D. J., "General 3D Offsetting of a Triangular Net Using an Implicit Function and the Distance Fields," Int. J. Precis. Eng. Manuf., Vol. 10, No. 4, pp. 131-142, 2009.
DOI
|