• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8A
• /
• pp.1163-1168
• /
• 1999

This paper proposes a wireless positioning method using the CDMA mobile communicaton network. The proposed method is time-based positioning method that uses mobile-station arrival time of forward link signal from base-stations. In this mehtod there are TDOA and TOA methods that use time-difference-of-arrival and time-of-arrival, respectively. Error characteristics and implementation simplicity of the two methods are compared and analyzed each other. As a results, it showed that TDOA has advantage of less sensitivity to the time error compared to TOA but has disadantage of more sensitivity to the spatial error. Also, from architecture of the CDMA system that is time synchronized to only active base-station it is analyzed that adoption of TDOA method is more advantageous than TOA because time difference of signal arrival from the neighbor base-stations against the active base-station can be measured more easily. Therefore, conclusion is made that TDOA is beat suit to the time-based positioning method for the present CDMA mobile communication networkgorithm performs block-by-block coherent decoding with the aid of pilot symbols. It is shown that the complexity of the algorithm grows linearly as a function of sequence length. The performance of the algorithm is shown to better than that of the conventional pilot symbol aided (PSI) algorithm. Simulation results are presented to assess the performance of the algorithm and the results are compared with that of the conventional PSI alforithm.

• Journal of Advanced Navigation Technology
• /
• v.21 no.2
• /
• pp.163-170
• /
• 2017

MLAT which is an independent cooperative surveillance system is applied to increase the positon resoultin of secondary survelliance radar. MLAT uses the hyperboic or hyperboloid position mesurement algorithm. Central processing unit of MLAT calculates target position using time difference of arrival (TDOA) which can be solved from time of arrival (TOA) information of each receivers (at least 4 receivers). To increase position resolution of MLAT which use TDOA, TOA which is transfer time from tranmitter to receiver shold be calculated with precision time resolution in receiver. This paper explained the MLAT system briefly and explained ATD which is one of means of calcuating pulse position. ATD is applied to solve the deviation of pulse position due to different amplitude of signals in mulitiple receivers. In this paper, to analysis the performance of ATD, the simulation result of LAS and CDS was compared with the simulation result of basic threshold method.

• Korean Journal of Remote Sensing
• /
• v.24 no.6
• /
• pp.535-549
• /
• 2008

Vicarious calibration for the satellite sensor relies on simulated TOA (Top-of-Atmosphere) radiances over various targets. In this study, TOA visible radiance was calculated over ocean targets which are located in five different regions over the Indian and Pacific ocean, and its possible use for the satellite sensor calibration was examined. TOA radiances are simulated with the 6S radiative transfer model for the comparison with MODIS/Terra and SeaWiFS measurements. Geometric angles and sensor characteristics of the reference satellites were taken into account for the simulation. AOT (Aerosol Optical Thickness) from MODIS/Terra, pigment concentrations from Sea WiFS, and ozone amount from OMI measurements were used as inputs to the model. Other atmospheric input parameters such as surface wind and total column water vapor were taken from NCEP/NCAR reanalysis data. The 5-day averaged radiances over all targets show that the percent differences between simulated and observed radiances are within about ${\pm}5%$ in year 2005, indicating that the calculated radiances are in good agreement with satellite measurements. It has also been shown that the algorithm can produce the SeaWiFS radiances within about ${\pm}5%$ uncertainty range. It has been suggested that the algorithm can be used as a tool for calibrating the VIS bands within about 5% uncertainty range.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.2
• /
• pp.108-116
• /
• 2011

Non-line-of-sight (NLOS) error is the most common and also a major source of errors in wireless location system. A novel weighting factor (NWF) method is presented in this paper, based on the RSS(Received Signal Strength) measurements, path loss model and Circular Disk of Scatterers Model (CDSM). The proposed positioning method effectively weighted the TOA distance measurements for each Base Station (BS). Simulation results show that the proposed method efficiently weighted the distance measurements and achieve higher localization accuracy than that of Linear Line of Position (LLOP) and Believable Factor Algorithm (BFA).

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.231-236
• /
• 2011

In recent years, LBS(Location Based Service) is applied in many different fields. Therefore, various location-aware schemes have been studied. In the location awareness system using time dependent algorithm, TOA(Time of Arrival) or TDOA(Time Difference of Arrival) algorithm, distortion of a signal by AWGN(Additive White Gaussian Noise) and multi-path effects cause the degradation of location awareness performance. In this paper, the unexpected noise is eliminated by averaging multiple pulses in order to overcome the degradation of performance. Also, we research the technique for improving the performance of the location awareness by detecting direct-path signal with adjusting threshold.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.6
• /
• pp.98-105
• /
• 2003

We propose a new technique of deinterleaving multiple radar pulse sequences by means of genetic algorithm for threat identification in electronic warfare(EW) system. The conventional approaches based on histogram or continuous wavelet transform are so deterministic that they are subject to failing in detection of individual signal characteristics under real EW signal environment that suffers frequent signal missing, noise, and counter-EW signal. The proposed algorithm utilizes the probabilistic optimization procedure of genetic algorithm. This method, a time-of-arrival(TOA) only strategy, constructs an initial chromosome set using the difference of TOA. To evaluate the fitness of each gene, the defined pulse phase is considered. Since it is rare to meet with a single radar at a moment in EW field of combat, multiple solutions are to be derived in the final stage. Therefore it is designed to terminate genetic process at the prematured generation followed by a chromosome grouping. Experimental results for simulated and real radar signals show the improved performance in estimating both the number of radar and the pulse repetition interval.

• Journal of IKEEE
• /
• v.18 no.1
• /
• pp.57-63
• /
• 2014

This paper is to technically implement the sensing platform for Home-Wellness Robot. The self-Localization of indoor mobile robot is very important for the sophisticated trajectory control. In this paper, the robot's self-localization algorithm is designed by RF sensor network and fuzzy inference. The robot realizes its self-localization, using RFID sensors, through the collaboration algorithm which uses fuzzy inference for combining the strengths of triangulation and triangulation. For the triangulation self-Localization, RSSI is implemented. TOA method is used for realizing the triangulation self-localization. The final improved position is, through fuzzy inference, made by the fusion algorithm of the resultant coordinates from trilateration and triangulation in real time. In this paper, good performance of the proposed self-localization algorithm is confirmed through the results of a variety of experiments in the base of RFID sensor network and reader system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.8
• /
• pp.673-681
• /
• 2002

This paper presents a new algorithm for estimating pulse repetition intervals (PRIs) of stagger PRI pulse trains using a 2 dimensional TDOA histogram. The PRI transform algorithm can remove harmonics of stable and jitter PRI pulse trains in a TDOA histogram. But, it is impossible for the algorithm to detect stagger PRI pulse trains because it regards frame PRIs of stagger Pulse trains as harmonics of stable PRI pulse trains. A new algorithm of this paper has an ability to distinguish stagger pulse trains from harmonics of other pulse trains and to estimate frame PRIs of detected pulse trains.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_1
• /
• pp.1285-1300
• /
• 2022

Turbidity, the measure of the cloudiness of water, is used as an important index for water quality management. The turbidity can vary greatly in small river systems, which affects water quality in national rivers. Therefore, the generation of high-resolution spatial information on turbidity is very important. In this study, a turbidity retrieval model using the Korea Multi-Purpose Satellite-3 and -3A (KOMPSAT-3/3A) images was developed for high-resolution turbidity mapping of Han River system based on eXtreme Gradient Boosting (XGBoost) algorithm. To this end, the top of atmosphere (TOA) spectral reflectance was calculated from a total of 24 KOMPSAT-3/3A images and 150 Landsat-8 images. The Landsat-8 TOA spectral reflectance was cross-calibrated to the KOMPSAT-3/3A bands. The turbidity measured by the National Water Quality Monitoring Network was used as a reference dataset, and as input variables, the TOA spectral reflectance at the locations of in situ turbidity measurement, the spectral indices (the normalized difference vegetation index, normalized difference water index, and normalized difference turbidity index), and the Moderate Resolution Imaging Spectroradiometer (MODIS)-derived atmospheric products(the atmospheric optical thickness, water vapor, and ozone) were used. Furthermore, by analyzing the KOMPSAT-3/3A TOA spectral reflectance of different turbidities, a new spectral index, new normalized difference turbidity index (nNDTI), was proposed, and it was added as an input variable to the turbidity retrieval model. The XGBoost model showed excellent performance for the retrieval of turbidity with a root mean square error (RMSE) of 2.70 NTU and a normalized RMSE (NRMSE) of 14.70% compared to in situ turbidity, in which the nNDTI proposed in this study was used as the most important variable. The developed turbidity retrieval model was applied to the KOMPSAT-3/3A images to map high-resolution river turbidity, and it was possible to analyze the spatiotemporal variations of turbidity. Through this study, we could confirm that the KOMPSAT-3/3A images are very useful for retrieving high-resolution and accurate spatial information on the river turbidity.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.558-563
• /
• 2015

There have recently been various services that use indoor location estimation technologies. Representative methods of location estimation include fingerprinting and triangulation, but they lack accuracy. Various kinds of research which apply existing location estimation methods like AOA, TOA, and TDOA are being done to solve this problem. In this paper, we study the location estimation algorithm based on AOA using a RSSI difference in indoor environments. We assume that there is a single AP with four antennas, and estimate the angle of arrival based on the RSSI value to apply the AOA algorithm. To compensate for RSSI, we use a recursive averaging filter, and use the corrected RSSI and the Pythagorean theorem to estimate the angle of arrival. The results of the experiment, show an error of 18% because of the radiation pattern of the four non-directional antennas arranged at narrow intervals.