• Journal of Electrical Engineering and Technology
• /
• v.11 no.3
• /
• pp.746-750
• /
• 2016

Dilution of Precision (DOP), as a measure of positioning accuracy, is an essential factor. Therefore, the DOP relationship between systems is very important. In this paper, the DOP relationship between TDOA and TOA in systems lacking clock bias is derived analytically and verified experimentally. Also, using those of earlier studies, the DOP relationship in each of defined systems is derived analytically.

• International Journal of Advanced Culture Technology
• /
• v.2 no.2
• /
• pp.15-18
• /
• 2014

This paper presents a sensor location decision making method respect to Container-Grown Seedlings in view of precision agriculture (PA) when sensors involved in tree container measure received signal strength (RSS) or time-of-arrival (TOA) between themselves and neighboring sensors. A small fraction of sensors in the container-grown seedlings system have a known location, whereas the remaining locations must be estimated. We derive Rao-Cramer bounds and maximum-likelihood estimators under Gaussian and log-normal models for the TOA and RSS measurements, respectively.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.9
• /
• pp.1297-1301
• /
• 2013

This paper analyzes of PD occurrence position through an analysis of the arrival time difference between the GIS partial discharge signal. Because of GIS (Gas Insulated Switchgear) is a facility very important power equipment and as part of the equipment that make up the power system, the stabilization of the power industry, which accounted for 88.5% share of GIS substation in the form of a substation is an important equipment for power supply. In the situation where we are gradually expanding the need for preventive diagnosis in order to improve the efficiency of equipment management and failure prevention for Preventive diagnosis. In this paper as a method for extracting pre-defect of failure of GIS Apply the average value method of calculating the 5 times each using a pulse of the first time of the second pulse (${\Delta}t$) with an oscilloscope generation position PD(Partial Discharge). the results of GIS internal inspection, the partial discharge of the actual the position of the partial discharge was confirmed with an accuracy of about 82% of positions. Arrival time difference in the most effective manner if the partial discharge of GIS internal occurs by applying the averaging method and TOA(Time of arrival) method, the partial discharge occurs you through the measurement and analysis of PD signal occurs was confirmed in the experiment are presented and diagnostic methods location tracking.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4A
• /
• pp.352-360
• /
• 2008

Recently Task Group (TG) 4 of the Institute of Electrical and Electronics Engineers (IEEE) 802.15a has been recommended a system with ranging capability in existence of multiple Simultaneous operating piconets (SOPs) as well as low-cost, low-power. According to the ranging service, coherent and non-coherent based ranging schemes using ternary code have been adopted as a standard. However it is hard to estimate an accurate time of arrival (TOA) in case of using direct sequence based TOA estimation method because pulse repetition interval (PRI) offered by TG is more limited than the maximum excess delay (MED) of channel. To mitigate inter pulse interference (IPI) problem, this paper proposes a non-coherent TOA estimation scheme using non-periodic transmission (NPT) pattern. The proposed receiver is based on a non-coherent energy detection considering with motivation of low rate wireless personal area network (LR-WPAN). TOA information is estimated via proper comparison with a prescribed threshold after the sliding correlation and search back window (SBW) process for reducing TOA error. To verify the performance of proposed ranging scheme, two distinct channel models approved by IEEE 802.15.4a TG are considered. According to the simulation results, we could conclude that the proposed scheme have performed better performance than the conventional method on the existence of multiple SOPs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12A
• /
• pp.1128-1135
• /
• 2010

A wireless positioning system using ultra-wideband (UWB) for indoor wireless positioning uses ranging data in order to accurately estimate location. Commonly, ranging uses time of arrival (TOA), time difference of arrival (TDOA) based on arrival time. The most fundamental issue in the ranging for wireless positioning is to obtain clock synchronization among the sensor nodes and to correct an error caused by the relative clock offset from each node. In this paper, we propose ranging and positioning technique using common clock in order to solve both clock synchronization and clock offset problems. To verify the performance of proposed, we simulated ranging and positioning in channel model introduced by IEEE 802.15.4a Task Group and then results show that location estimation is unaffected by clock offset.

• Journal of Communications and Networks
• /
• v.16 no.1
• /
• pp.92-97
• /
• 2014

A novel method for extracting frequency slippage signal from radar full pulse sequence is presented. For the radar full pulse sequence received by radar interception receiver, radio frequency (RF) and time of arrival (TOA) of all pulses constitute a two-dimensional information sequence. In a complex and intensive electromagnetic environment, the TOA of pulses is distributed unevenly, randomly, and in a nonstationary manner, preventing existing methods from directly analyzing such time series and effectively extracting certain signal features. This work applies Gaussian noise insertion and structure function to the TOA-RF information sequence respectively such that the equalization of time intervals and correlation processing are accomplished. The components with different frequencies in structure function series are separated using empirical mode decomposition. Additionally, a chaos detection model based on the Duffing equation is introduced to determine the useful component and extract the changing features of RF. Experimental results indicate that the proposed methodology can successfully extract the slippage signal effectively in the case that multiple radar pulse sequences overlap.

• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.159-163
• /
• 2013

In this paper, we propose a new method to deinterleave multi-stage stagger PRI signals of pulse radars using the electronic intelligence systems. While former algorithms were based on hardware PRI tracker only using the first deviation of the TOA of radar signals, this paper uses the first and the second deviation of TOA of radar signals and uses the PRI histogram method to deinterleave multiple PRIs of pulse radars. This algorithm can be used for deinterleaving various PRI signals at electronic intelligence systems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.386-389
• /
• 2011

현재 실내 위치 인식 계산 알고리즘과 거리 측정 방법은 놀라울 정도로 다양하다. 그 중 거리를 측정하는 방법으로 마커를 이용한 방법과 RF(Radio Frequency)를 이용한 방법 등 여러 가지 방법들이 제안되었는데 본 논문에서는 사람이 이용하기 쉬운 RF를 이용한 위치 인식 성능 개선에 대해 다루고자 한다. RF 신호가 도달하는 시간을 이용하여 거리를 측정하는 TOA(Time of arrival) 방식을 사용하여 기준점과의 거리를 측정하고, 측정된 거리 값에 가중치를 이용해 장애물에 의한 오차를 보정하였다. 측정된 거리 값을 일정 개수를 모아 최빈값을 이용하여 정확도를 향상 시켰고 이를 통해 실내 좌표를 계산 하였다. 그리고 계산된 좌표 값에 칼만 필터를 적용하여 움직임을 보정하였다. 본 논문에서는 RF를 이용한 위치 인식 알고리즘을 제안하고 보정 전 데이터와 보정 후 데이터를 비교해 비컨 신호의 정확도를 확인하였다.

• ETRI Journal
• /
• v.35 no.5
• /
• pp.757-766
• /
• 2013

This paper deals with the estimation of the time of arrival (TOA) of ultra-wideband signals under IEEE 802.15.4a channel models. The proposed approach is based on a randomness test and consists of determining whether an autoregressive (AR) process modeling an energy frame is random or not by using a distance to measure the randomness. The proposed method uses a threshold that is derived analytically according to a preset false alarm probability. To highlight the effectiveness of the developed approach, simulation setups as well as real data experiments are conducted to assess the performance of the new TOA estimation algorithm. Thereby, the proposed method is compared with the cell averaging constant false alarm rate technique, the threshold comparison algorithm, and the technique based on maximum energy selection with search back. The obtained results are promising, considering both simulations and collected real-life data.

• International journal of advanced smart convergence
• /
• v.3 no.2
• /
• pp.14-17
• /
• 2014

Precision agriculture relies on information technology, whose precondition is providing real-time and accurate information. It depends on various kinds of advanced sensors, such as environmental temperature and humidity, wind speed, light intensity, and other types of sensors. Currently, it is a hot topic how to collect accurate information, the main raw data for agricultural experts, monitored by these sensors timely. Most existing work in WSNs addresses their fundamental challenges, including power supply, limited memory, processing power and communication bandwidth and focuses entirely on their operating system and networking protocol design and implementation. However, it is not easy to find the self-localization capability of wireless sensor networks. Because of constraints on the cost and size of sensors, energy consumption, implementation environment and the deployment of sensors, most sensors do not know their locations. This paper provides maximum likelihood estimators for sensor location estimation when observations are time-of arrival (TOA) range measurement.