• Archives of Metallurgy and Materials
• /
• 제66권4호
• /
• pp.1033-1036
• /
• 2021

Laser cladding is a method that can be applied to repair the crack and break on the mold and die surfaces, as well as generate new attributes on the surface to improve toughness, hardness, and corrosion resistance. It is used to extend the life of the mold. It also has the advantages of superior bonding strength and precision coating on a local area compared with the conventional thermal spraying technology. In this study, we investigated the effect of cladding on low carbon alloy steel using 18%Cr-2.5%Ni-Fe powder (Rockit404), which showed high hardness on the die surface. The process conditions were performed in an argon atmosphere using a diode laser source specialized for 900-1070 nm, and the output conditions were 5, 6, and 10 kW, respectively. After the cladding was completed, the surface coating layer's shape, the hardness according to the cross-section's thickness, and the microstructure were analyzed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.388-393
• /
• 1992

An infrared range finder using a self-mixing laser diode (SM-LD), which has been proposed and developed by the Authors, can measure not only a range of a moving target but its velocity simultaneously. In this paper, described is that the precise mode-hop pulse train can be obtained by employing a new signal processing circuit even when the backscattered light returning into the SM-LD is much more weaker. As a result, the distance to a tilted square sheet made from aluminium or white paper, which is placed 10 cm through 60 cm from the SM-LD, is measured with accuracy of a few percent even when the tilting angle is less than 75 degrees or 85 degrees, respectively. And in this paper, described is the range-image recognition of a plane object under the condition of standstill. The output laser beam is scanned by scanning two plane mirrors-equipped with each stepping motor. And we succeeded in the acquisition of the range-image of a plane object in a few tens of seconds. Furthermore, described is a feasibility study about the range-image recognition of a slowly moving plane object.

• 전자공학회논문지D
• /
• 제36D2호
• /
• pp.81-89
• /
• 1999

다양한 파장변화 기술중에서 레이져 다이오드의 발전상태에서 교차이득변도(Cross-Gain Modulation)을 이용한 파장변환은 고속의 신호를 매우 간단하고 효율적으로 처리할 수 있다. 본 논문에서는 SSGDBR (Superstructure Grating Distributed Bragg Reflector) 레이저 다이오드의 파장변환기로서 특성을 분석하고 광통신 네트웍 모델링을 위한 CAD 도구로서 개선된 시영역 대신호 동적모델(Time-Domain Large-Signal Dynamic Model)의 유용성을 제시하였다. 이 모델을 l용하여 이런 구조의 파장변환 소자는 10Gbps이상 고속데이터를 처리할 수 있고 광대역 파장변환이 가능하다는 것을 확인하였다. 입력 광신호의 세기와 주입되는 전류가 파장변환된 신호의 소광비 등에 미치는 영향 및 Eye Diagram 등을 살펴 보았으며, 기존에 발표된 실험결과들과 매우 유사한 경향을 보임을 관측하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권1호
• /
• pp.78-84
• /
• 2012

금형의 공정 과정에서 금형과 성형품 사이에서 발생하는 마찰로 인해 발생하는 금형의 마모가공차로 작용하여 성형 품질을 저하시킬 수 있다. 따라서 금형의 내마모성을 향상시키기 위해 질화나 침탄처리, 화염 및 고주파 표면처리 등의 방법들이 적용되어 왔다. 하지만 형상의 제한이나 제품의 변형 등과 같은 문제점을 수반하고 있기 때문에, 이러한 문제점을 해결할 수 있는 표면처리 방법으로써 레이저 표면처리 기술이 검토되고 있다. 따라서 본 연구에서는 고출력 다이오드 레이저를 이용, 금형재료용 주철의 표면처리를 시도하였다. 앞서 제1보와 제2보의 논문에서는 금형의 재료 및 형상의 차이에 따른 열처리 특성을 비교하였다면, 본 논문에서는 열처리 후 생성되는 경화부, 경계부위 및 모재의 조직적 차이를 분석하기 위해 광학 현미경 및 전자 현미경을 이용하여 미세조직을 관찰하고, EDS를 통해 조직의 상태를 파악하였다. 미세조직 관찰 결과, 경화부는 침상의 마르텐사이트 조직이 형성되어 있었다.

• 한국기계가공학회지
• /
• 제9권4호
• /
• pp.53-58
• /
• 2010

In this paper, the output characteristics of PSD(Position Sensetive Detector) used in measurement system are described. Most of the precision measurment systems are accomplished by a laser diode(LD), a photo diode(PD) and PSD(Position Sensetive Detector), which are used in reflection of mirror or projection of infrared spectrometer. But it is especially restricted by resolution of PD and PSD in nano-measurement. A new inclined light methods into the PSD are employed in the surface measurement system for increasing the resolution. As the results, we can know that the output characteristics of detective senser (PSD) become more than 2 or 3 times by changing inclined angle(range: 5 degree) compared with common angle. In addition, the experiment results are confirmed that the change of inclined angle is not affecting to the linearity and repeating.

• 전자공학회논문지D
• /
• 제34D권7호
• /
• pp.71-78
• /
• 1997

In this paper, we analyzed the crosstalk characteristics of LD array modules for WDM and improved the crosstalk levels using a screening line between access lines. From the calculation resutls, we have found that inductive crosstalk of access lines is dominant for the low impedance LD arrays with short bondwire interconnections. The proposed array interconnecton with the screening line and ouble bondwires, rduces the crosstalk level about 10dB compared to conventional interconnections using simple access lines and a single bondwire. This proposed structure also can be easily imlemented with transmission reliability.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.112-115
• /
• 2008

The multistage wavelength division multiplexed passive optical network (WDM-PON) with multiple remote nodes (RN) can accommodate widely spread subscribers efficiently and it increases the channel usage. We implemented a multistage RN using band add-drop filters and it was applied to a wavelength-locked Fabry-Petor laser diode based gigabit WDM-PON.

• 대한임상검사과학회지
• /
• 제56권1호
• /
• pp.52-58
• /
• 2024

광역학 요법(photodynamic therapy)은 특정 파장의 빛에 의해 활성화되는 광민감제(photosensitizer)를 사용하여 세포 내 산소를 활성화시키는 치료 방법으로, 항생제 내성균에 의한 상처 감염의 치료에 유망한 접근 방법이다. 일반적으로 건강한 사람에게 비병원성인 녹농균(Pseudomonas aeruginosa, P. aeruginosa)은 특정 병원성 징후를 보이지 않지만, 피부 손상이나 면역력이 저하된 사람들에서는 패혈증과 같은 심각한 질병을 유발할 수 있다. 항생제는 P. aeruginosa 감염에 대한 전통적인 치료법이나 약물 오용으로 인한 항생제 내성의 증가는 이러한 감염을 관리하는 데 큰 어려움을 준다. 본 연구에서는 P. aeruginosa의 억제제로서 광민감제(PhotoMed, Methyl pheophorbide A, Radachlorin^®)와 다이오드 레이저를 이용한 광역학 치료 효과를 조사하는 것을 목표로 했다. P. aeruginosa 현탁액과 광민감제(PhotoMed, Methyl pheophorbide A, Radachlorin^®)를 페트리 접시에 접종하여 30분 후 다이오드 레이저를 사용하여 3 J/cm²의 에너지 밀도로 조사했다. 그 결과, P. aeruginosa는 PhotoMed에서 79.65%, Methyl pheophorbide A에서 47.36%, Radachlorin^®에서 40.91%의 사멸률을 보였다. 이번 연구는 P. aeruginosa를 억제하기 위한 가장 효과적인 접근법이 PhotoMed와 다이오드 레이저를 이용한 광역학 치료임을 보여준다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.322-322
• /
• 2010

For boron doping on n-type silicon wafer, around $1,000^{\circ}C$ doping temperature is required, because of the relatively low solubility of boron in a crystalline silicon comparing to the phosphorus case. Boron doping by fiber laser annealing and lamp furnace heat treatment were carried out for the uniformly deposited p-a-Si:H layer. Since the uniformly deposited p-a-Si:H layer by cluster is highly needed to be doped with high temperature heat treatment. Amorphous silicon layer absorption range for fiber laser did not match well to be directly annealed. To improve the annealing effect, we introduce additional lamp furnace heat treatment. For p-a-Si:H layer with the ratio of $SiH_4:B_2H_6:H_2$=30:30:120, at $200^{\circ}C$, 50 W power, 0.2 Torr for 30 min. $20\;mm\;{\times}\;20\;mm$ size fiber laser cut wafers were activated by Q-switched fiber laser (1,064 nm) with different sets of power levels and periods, and for the lamp furnace annealing, $980^{\circ}C$ for 30 min heat treatment were implemented. To make the sheet resistance expectable and uniform as important processes for the $p^+$ layer on a polished n-type silicon wafer of (100) plane, the Q-switched fiber laser used. In consequence of comparing the results of lifetime measurement and sheet resistance relation, the fiber laser treatment showed the trade-offs between the lifetime and the sheet resistance as $100\;{\omega}/sq.$ and $11.8\;{\mu}s$ vs. $17\;{\omega}/sq.$ and $8.2\;{\mu}s$. Diode level device was made to confirm the electrical properties of these experimental results by measuring C-V(-F), I-V(-T) characteristics. Uniform and expectable boron heavy doped layers by fiber laser and lamp furnace are not only basic and essential conditions for the n-type crystalline silicon solar cell fabrication processes, but also the controllable doping concentration and depth can be established according to the deposition conditions of layers.

• 대한의용생체공학회:의공학회지
• /
• 제32권4호
• /
• pp.319-327
• /
• 2011

Skeletal muscle fatigue is defined as a 'any reduction in the maximal capacity to generate force or power output', and is the reduction of oxygen consumption and by-product of metabolism. For the muscle fatigue therapy, low level laser has been introduced that leads the mitochondrial respiratory and attributes the muscle fatigue recovery. This study analyzed the muscle fatigue signals from electromyography(EMG) during low-level laser therapy (LLLT). Healthy subjects performed voluntary elbow flexion-extension excercise and received placebo LLLT and active LLLT using a 830 nm laser diode. Then, EMG were measured for the evaluation of muscle fatigue. The acquired EMG data were analyzed with median frequency and short time fourier transform methods. The results showed that the LLLT had a significant symptomatic relief of muscle fatigue based on the EMG frequency analysis. Therefore, the muscle fatigue analysis with EMG signals can be applied to quantitative evaluation for the monitoring of LLLT effects.