• 펄프종이기술
• /
• 제38권2호
• /
• pp.61-71
• /
• 2006

Environment-friendly shock-absorbing (cushioning) materials were made using a vacuum forming method from waste wood collected from local mountains in Korea. The waste wood was pulped by thermomechanical pulping. The TMP cushions showed superior shock-absorbing properties with lower elastic moduli compared to EPS(Expanded Polystyrene) and pulp mold. Even though the TMP cushions made using at different suction times had many free voids in their inner fiber structures, their apparent densities were a little higher than EPS and much lower than pulp mold. The addition of cationic starch improved elastic modulus of the TMP cushions without increasing the apparent density, which was different from surface sizing with starch. The porosity of the TMP cushions was a little greater than EPS and much less than pulp mold. Finally, the TMP cushions have great potential to endure external impacts occurring during goods distribution.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.5-14
• /
• 2015

Recently, the use of wood resources has been limited due to global environmental change, like global warming and desertification. It is very critical in Korea's paper industries because lots of virgin pulp are dependant on direct import from abroad for printing grade of paper. In this work, the alternatively best available technique for reducing the import amounts of BKP (bleached Kraft pulp) was considered by mixing DIP (deinked pulp) and TMP (thermomechanical pulp) for the manufacture of high quality paper. Generally known, the sheet prepared from fibrous raw materials of DIP and TMP has lower strength and optical properties than that prepared from BKP. This study was aimed to improve the sheet quality by using DIP and TMP. 4 kinds of polyelectrolytes were approached to find out the best effects on physical strength and optical brightness improvements, and high retention behaviors with GCC (ground calcium carbonate). In conclusion, amphoteric PAM with 1,000,000 molecular weight (g/mol) and 0.5 charge density (meq/g) was best for the improvement of strength properties with the mixture of DIP and TMP. GCC retention rate was also the highest with cationic-PAM of above 2,000,000 molecular weight (g/mol) and about 2.0-3.0 charge density (meq/g) of strengthening agent.

• 청정기술
• /
• 제23권2호
• /
• pp.148-157
• /
• 2017

To prepare UV-curable polyurethane-acrylate oligomer, NCO-terminated urethane prepolymers with trimethylolpropane, [TMP; 0 (0), 0.1 (0.021) and 0.2 (0.043) mole (mole fraction)] as crosslinkable tri-functional chain extender were end-capped with pentaerythritol triacrylate [PETA; 2.0 (0.400), 1.7 (0.354) and 1.4 (0.304) mole (mole fraction)] with one hydroxyl group/three vinyl functionalities. The stable as-formulated UV-curable polyurethane-acrylates [stable mixtures of PETA-capped oligomer/reactive acrylic monomer diluents without/with heptadecafluorodecyl methacrylate (PFA; 0, 6 and 9 wt%)] were formed up to 0.2 (0.043) mole (mole fraction) of TMP content in the prepolymer, while homogeneous-mixing failed at 0.3 (0.068) mole (mole fraction), in which the crosslink density in NCO-terminated urethane prepolymer was too high to enable the formation of stable mixture. This study examined the effect of TMP/PETA molar ratio and heptadecafluorodecyl methacrylate (PFA) content (wt%) on the properties of UV-cured polyurethane-acrylates as marine antifouling coating materials. The properties of UV-cured polyurethane-acrylate were found to be significantly dependent on the crosslinkable TMP/PETA ratio and PFA content. With the increasing of the TMP and PFA contents, the contact angles increased, and consequently the surface tension decreased. The adhesion of algae/barnacles to PFA contained film samples were found to be sufficiently weak to allow their easy removal. These results suggest that the UV-cured samples containing PFA have strong potential as coating materials for antifouling applications.

• 반도체디스플레이기술학회지
• /
• 제6권2호
• /
• pp.19-23
• /
• 2007

The blue emitting OLEDs using TMP-BiP[(4'-Benzoylferphenyl-4-yl)phenyl-methanone-Diethyl(biphenyl-4-ymethyl) phosphonate] host and DJNBD-1 dopant have been fabricated and characterized. In the device fabrication, 2-TNATA [4,4',4"-tris(2-naphthylphenyl-phenylamino)-triphenylamine] as a hole injection material and NPB [N,N'-bis(1-naphthyl)N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] as a hole transport material were deposited on the ITO(indium tin oxide)/glass substrate by vacuum thermal evaporation method. Followed by the deposition, blue color emission layer was deposited using TMP-BiP as a host material and DJNBD-1 as a dopant. Finally, small molecule OLEDs with structure of $ITO/2-TNATA/NPB/TMP-BiP:DJNBD-l/Alq_3/LiF/Al$ were obtained by in-situ deposition of $Alq_3$, LiF and Al as the electron transport material, electron injection material and cathode, respectively. The effect of dopant into host material of the blue OLEDs was studied. The blue OLEDs with DJNBD-1 dopant showed that the maximum current and luminance were found to be about 34 mA and $8110\;cd/m^2$ at 11 V, respectively. In addition, the color coordinate was x=0.17, y=0.17 in CIE color chart, and the peak emission wavelength was 440 nm. The maximum current efficiency of 2.15 cd/A at 7 V was obtained in this experiment.

• 한국임상수의학회지
• /
• 제27권5호
• /
• pp.565-568
• /
• 2010

설파퀴녹살린과 트리메토프림 합제는 닭콕시듐병의 예방과 치료목적으로 널리 사용하고 있으나, 닭에서의 잔류에 관한 연구보고는 미흡하다. 본 연구에서는 음수첨가용 액제로 신규 개발된 설파퀴녹살린 및 트리메토프림 합제 (설파퀴녹살린, 100 g/L; 트리메토프림, 33.4 g/L)를 육계에 음수 리터당 본제 0.75 mL 및 1.5 mL를 3일간 투여한 후 살처분하여 가식부위내 잔류농도를 액체크로마토그래프/질량분석기를 이용하여 측정하였다. 그 결과 약물 투여 후 7일째에는 모든 가식부위내에서 설파퀴녹살린 및 트리메토프림은 검출되지 않았다. 따라서 신규 음수첨가용 액제인 설파퀴녹살린 및 트리메토프림 합제의 휴약기간은 최소 5일 이상으로 설정되어야 할 것이다.

• 상하수도학회지
• /
• 제37권5호
• /
• pp.271-279
• /
• 2023

Fouling is an inevitable problem in membrane water treatment plant. It can be measured by trans-membrane pressure (TMP) in the constant flux operation, and chemical cleaning is carried out when TMP reaches a critical value. An early fouilng alarm is defined as warning the critical TMP value appearance in advance. The alarming method was developed using one of machine learning algorithms, decision tree, and applied to a ceramic microfiltration (MF) pilot plant. First, the decision tree model that classifies the normal/abnormal state of the filtration cycle of the ceramic MF pilot plant was developed and it was then used to make the early fouling alarm method. The accuracy of the classification model was up to 96.2% and the time for the early warning was when abnormal cycles occurred three times in a row. The early fouling alram can expect reaching a limit TMP in advance (e.g., 15-174 hours). By adopting TMP increasing rate and backwash efficiency as machine learning variables, the model accuracy and the reliability of the early fouling alarm method were increased, respectively.

• 펄프종이기술
• /
• 제46권2호
• /
• pp.16-21
• /
• 2014

Characteristics of coating color penetration into paper were elucidated using various types of pulps and pigments. A commercial paper, KP and TMP handsheets were used for base paper. Clay and GCC were used as coating pigment. Laboratory rod draw down coater was used for coating application. Coating color penetration was evaluated by measuring the roughness of surface and back side of a coating layer. The results of coating roughness showed that clay was much better than GCC as a coating pigment. In case of pulp type, KP base paper was more effective than TMP base paper to reduce coating penetration.

• Asian-Australasian Journal of Animal Sciences
• /
• 제4권3호
• /
• pp.281-284
• /
• 1991

Combination effects of sulfamethoxazole (SMX) and trimethoprim (TMP) against nine gram positive bacterial strains and 43 gram negative bacterial strains which included 40 strains of animal intestinal bacteria were studied in vitro. Minimum inhibitory concentrations (MICs) of SMX and TMP alone and 20:1 (SMX : TMP) mixture (ST) were investigated by the method recommended by Ad Hoc Committee of the Japan Society of Chemotherapy for the Evaluation of Sensitivity Testing Methods for Sulfamethoxazole and Trimethoprim. MICs of ST were more potentiated than those of SMX alone in 8 of 9 gram positive strains and 40 of 43 gram negative strains. Especially, 38 strains of 40 intestinal bacteria showed significant susceptibility to ST as compared to SMX. These results suggest a strong synergistic activity of ST mixture against animal intestinal bacteria, The activity was considered to be comparable to those of other current antibiotics.

• Membrane and Water Treatment
• /
• 제9권5호
• /
• pp.353-361
• /
• 2018

Fouling characteristics of humic substances on tight ultrafiltration (UF) membrane have been investigated. The tight UF membrane was prepared by blending polysulfone (PSf) in N.N-dimethylacetamide (DMAc) with 25%wt of Polyethylene glycol (PEG400) and 4%wt of acetone. Fouling characteristic of the modified PSf membrane was observed during peat water filtration in different trans-membrane pressure (TMP). It was found that the acetone modified membrane provided 13% increase in TMP during five hours of peat water filtration, where a stable flux was reached within 150 minutes. Meanwhile, the increase of TMP from 10 psig to 30 psig resulted in a fouling resistance enhancement of 60%. Furthermore, based on the fouling analysis, fouling mechanism at the first phase of filtration was attributed to intermediate blocking while the second phase was cake formation.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제1권3호
• /
• pp.117-130
• /
• 2014

This paper presents a study on the influence of different thermo-mechanical processing (TMP) parameters on some required properties such as micro-hardness and Young's modulus of a novel near ${\beta}$ alloy Ti-20.6Nb-13.6Zr-0.5V (TNZV). The TMP scheme comprises of hot working above and below ${\beta}$ phase, solutionizing treatment above and below ${\beta}$ phase coupled with different cooling rates. Factorial design of experiment is used to systematically collect data for micro-hardness and Young's modulus. Validity of assumptions related to the collected data is checked through several diagnostic tests. The analysis of variance (ANOVA) is used to determine the significance of the main and interaction effects. Finally, optimization of the TMP process parameters is also done to achieve optimum values of the micro-hardness and Young's modulus.