Park, Jin-Yong;Kyung, Gee-Yong;Han, Song-Hee;Kim, Hyun-Woo;Lee, Hyuk-Chan
Korean Membrane Journal
/
제8권1호
/
pp.50-57
/
2006
We treated lake water by ceramic ultrafiltration membranes and found the optimal backflushing period and trans-membrane pressure (TMP) of periodic water-backflushing system. The optimal filtration time interval at fixed BT = 3 sec was 30 for A002 membrane in all viewpoints of $J/J_0,\;R_f$, and $V_T$, and we could acquire the highest $V_T$ value in the membranes used here. However, the highest $V_T$ was acquired at FT = 60 sec for M9, and at FT = 90 sec for C005 membrane. Then the lower TMP reduced the membrane fouling during filtration of lake water, and could maintain the higher permeate flux compared with the initial flux. However, the largest value $V_T$ could be obtained at the highest TMP condition for M9 membrane at fixed FT = 60 sec and BT = 3 sec. The quality of treated water in our UF ceramic system was Turbidity = $0.20{\sim}4.88NTU$, $COD_{Mn} = 0.00{\sim}2.58 mg/L$, $TDS = l8{\sim}71 mg/L$, and $NH_3-N = 0.004{\sim}1.689 mg/L$.
A process diagnosis method for membrane water treatment plant was developed using a constant flux membrane fouling model. This diagnosis method can be applied to a real-field membrane-based water treatment plant as an early alarming system for membrane fouling. The constant flux membrane fouling model was based on the simplest equation form to describe change in trans-membrane pressure (TMP) during the filtration cycle from a literature. The model was verified using a pilot-scale microfiltraton (MF) plant with two commercial MF membrane modules (72 m2 of membrane area). The predicted TMP data were produced using the model, where the modeling parameters were obtained by the least square method using the early plant data and modeling equations. The diagnosis was carried out by comparing the predicted TMP data (as baseline) and real plant data. As a result of the case study, the diagnsis method worked pretty well to predict the early points where fouling started to occur.
Optimum conditions for the production of acetoin and ammonia as the precursors of tetramethylpyrazine(TMP) were determined using Lactococcus lactis subsp. lactis biovar. diacetylactis FC1 in a modified Lactose-citrate broth containing galactose, citrate, and arginine. The cell growth and the productivity of acetoin and ammonia were remarkably increased in an aerobic culture with 10 $\mu M$ of hematin. For the optimum conditions of acetoin and ammonia production, the concentration of citrate and arginine were adjusted to 156 mM and 50 mM after 18 hr cultivation, and citrate and galactose to 156 mM and 50 mM after 36 hr cultivation, respectively. In these conditions, acetoin and ammonia were produced to the final concentration of 127 mM and 195 mM, which were the highest concentations, respectively. The optimum conditions of the TMP production were also determined as follows; 4 hours at 121, pH 8.3, and the maximal yield of TMP under these conditions was 0.81 g/l.
태양전지용 투명전도막에 사용되는 Al-doped ZnO (AZO) 막은 저가이면서도 가시광역 영역에서 갖는 우수한 투과율과 낮은 비저항을 갖는 특성 때문에 ITO의 대체 재료로서 최근 활발한 연구가 진행되고 있다. 특히, 양산 현장에서는 in-line type의 대형 sputtering system에서 증착하고 있으며 높은 증착 속도와 박막 특성의 균일도가 중요한 과제다. 본 연구에서는 $2\;m\;{\times}\;1\;m\;{\times}\;0.2\;m$의 sputtering system에서 기판 캐리어를 이용해서 커다란 기판을 좁고 긴 타겟의 양쪽으로 왕복 운동을 하는 swing dynamic deposition 방법으로 $272\;mm\;{\times}\;500\;mm$ 크기의 AZO target (Al 2 wt%)을 이용하여 bipolar pulsed dc로 증착하였다. 이 시스템의 배기는 TMP와 cryo pump를 이용해서 $5\;{\times}\;10^{-7}\;Torr$의 기본 진공도를 얻으며, 공정 중에는 TMP만 사용하였다. 하지만, 본 시스템의 TMP는 비대칭 적으로 한쪽에 치우쳐 설치되어 있는데, 이것이 챔버 내에서 공정 가스인 Ar의 유동의 불균일도를 초래하게 되며, 그것이 증착되는 박막의 두께 균일도 및 특성 균일도에 영향을 주고 있음을 알 수 있었다. 본 연구에서는 다른 기본 진공도에서 증착된 AZO 박막의 특성 차이를 알아보고 비대칭 배기 구조가 in-line type 시스템에서 어떠한 두께 및 특성 불균일도를 가져오는지, 그리고 시스템 내부에 발생시키는 압력 불균일도를 상용 3차원 전산 유체해석 프로그램인 CFD-ACE+를 이용하여 분석하였다.
Purpose: This study examined the effects of therapeutic massage (TMP) and home exercise program (HEP) on pain, range of motion (ROM), depression, and quality of life (QOL) after arthroscopic rotator cuff repair in middle-aged women. Methods: Nineteen middle-aged women who underwent arthroscopic rotator cuff repair were enrolled in the study. All subjects were assigned randomly to the experimental group (n=9) or the control group (n=10). The subjects in both groups performed HEP for 30 minutes, three times per day, for eight weeks. The subjects in the experimental group also performed HEP, with TMP being performed for 30 minutes, 16 sessions for eight weeks. All subjects were evaluated with a visual analogue scale (VAS), shoulder ROM, self-rating depression scale (SDS), and Korean brief version of WHO quality of life scale (WHOQOL-BREF). A paired t-test was performed to test the significant differences between before and after the intervention. An independent t-test was conducted to test the significant differences between the groups. Results: Following the intervention, both groups showed significant differences than before the intervention in the VAS, shoulder ROM, SDS, and WHOQOL-BREF (p<0.05). There were significant differences in the ROM of shoulder flexion, SDS, and WHOQOL-BREF between the groups (p<0.05). Conclusion: These findings suggest that intensive TMP is an effective method for improving shoulder flexion mobility, depressive symptom, and QOL in middle-aged women after arthroscopic rotator cuff repair.
The membrane pilot plant has being operated in the Hyeondo pumping station to find the optimal operation technique of Gong-Ju membrane water treatment plant (WTP) which is constructing in $250m^3/d$ scale. The pilot plant was consisted of two trains which can treat $30,000m^3/d$ per train. First train was operated for one year under the condition of flux $1m^3/m^2{\cdot}d$ while the effects of flux variation and addition of powdered activated carbon(PAC) were evaluated in second train. The turbidity of membrane product water of first train which is operated on Flux $1m^3/m^2{\cdot}d$ was always below 0.05 NTU regardless of raw water turbidity. And also, the trance-membrane pressure(TMP) was maintained at $0.3{\sim}0.5kgf/cm^2$ for about 9 months and increased rapidly to $1.8kgf/cm^2$ which is maximum operating TMP. However, TMP was rapidly increased to $1.8kgf/cm^2$ within 2 months as flux was increased from 1 to $2m^3/m^2{\cdot}d$, especially, within 10 days under high turbidity(30~50NTU). This reault means that if Gongju membrane WTP is operated in flux $1m^3/m^2{\cdot}d$, chemical cleaning period can be maintained over 6 months. Only 10% of dissolved organic carbon (DOC) was removed in membrane process while the removal efficiencies of manganese and iron were 60% and 77% respectively. However, because only solid manganese and iron were removed in membrane process, an additional process for treating soluble manganese is required if souble manganese is high in raw water. 70% of 70ng/L 2-MIB which is causing taste & odor was removed in powdered activated carbon (PAC) tank with 50mg/L PAC which is design concentration of Gongju WTP. In addition, TMP was reduced with addition of 50mg/L PAC regardless of flux. Because TMP was not influenced even if 100mg/L PAC was added, the high taste and odor problem can be controled by additional injection of PAC.
The combination of trimethoprim (TMP) and sulfamethoxazole (SMX) has been shown to be active against Mycobacterium tuberculosis (Mtb) in clinical tuberculosis (TB) treatment. However, the mechanism of action of TMP-SMX against Mtb is still unknown. To unravel this, we have studied the effect of TMP and SMX by deleting the folP2 gene in Mycobacterium smegmatis (Msm), and overexpressing the Mtb and Msm folP1/2 genes in Msm. Knocking out of the folP2 gene in Msm reduced the minimum inhibitory concentration of SMX 8-fold compared with wild type. Overexpression of the folP1 genes from Mtb and Msm increased the MICs by 4- and 2-fold in Msm for SMX and TMP, respectively. We show a strong correlation between the expression of folP1 and folP2 genes and TMP-SMX resistance in mycobacteria. This suggests that a combination of FolP2 inhibitor and SMX could be used for TB treatment with a better outcome.
진공게이지의 비교교정 방법으로 교정이 가능하고-비교교정은, 2차표준기라고 부르는 교정되어진 게이지와 교정할 다른 게이지의 지시값을 읽어 비교는 방법- 다른 진공관련 실험을 할 수 있는 기체 유량 시스템을 개발하였다. 교정시스템에의 진공용기는 터보분자펌프(TMP)에 의해서 배기하고, 후면에 스크롤펌프를 배치하여 배기시스템을 꾸몄다. 터보분자펌프의 최대허용가능 압력은 펌프의 주입구에서 0.1 Pa까지이며, 이보다 압력이 높아지면 배기속도가 감소하며 압력대 이하의 환경을 조절하기가 매우 어렵게 된다. 현재 133 Pa까지의 높은 압력을 발생시킬 수 있는 새롭게 개발된 기체유량조절시스템은 바이패스 라인에 맞도록 설계된 컨덕턴스-리듀서를 설치하여 터보분자펌프를 안전하게 운용할 수 있도록 하였다. 추가로 진공용기안에 전체압력 범위(0.1 Pa ~ 133 Pa)의 압력을 생성하며 기체 주입과 압력구배를 연구하였다. 압력의 최대 편차는 용기의 위쪽 방향에 위치한 가스 주입구에서 가까운 위치 C에서 1.6%로 나타났다.
본 연구에서는 분리막의 일반적 역세척 방법이 아닌 질소 역세척을 하면서, 4종의 탄소계 관형 세라믹 한오여곽막으로 제지공장의 방류수를 처리하였을 때 역세척 주기 및 막간압력차 (TMP), 유량의 영향과 최적운 전조건을 규명하였다. 역세척시간 (BT)을 40초로 고정하였고, 정상운전시간 (FT)은 4~32분, TMP는 $1.0~3.0kg_f/cm^2$ 유속은 0.53~1.09cm/s로 변화시켰다. 또한 최적조건은 무차원 투과선속 ($J/J_0$) 및 총과여부부피 ($V_T$) 막오염에 의한 저항 ($R_f$)의 측면에서 고찰하였다. 그 결과 최적 역세척주기는 BT/FT=0.083 (FT=8분)으로 가장 빈번한 역세척 BT/FT=0.167 (FT=4분) 보다 오히려 많은 총여과부피를 얻을수 있었다. 한편, TMP가 증가할수록 구동력의 증가로 보다 많은 $V_T$를 얻을 수 있었고, 유량이 증가할수록 발생한 난류의 영향으로 막오염은 감소되고 투과유속은 증가하여 많은 $V_T$를 얻을수 있었다. 오염물질 제거율은 탁도 95% 이상, 호학적 산소요구량 ($COD_{Cr}$)45~83%로 높았으나 총용존고형물 (TDS)의 경우 10% 이하로 낮았다.
Psoralens are metabolized in the liver and thus can produce liver damage in laboratory animals when given in excessive doses. However, in humans, reports of the effects of psoralens on liver functions during photochemotherapy have been contradictory. We studied 311 patients t o observe the effects of various phototoxic drugs: 8-methoxypsoralen (8-MOP), 5-methoxypsoralen (5-MOP), 4,5,8-trimethylpsoralen (TMP)-on liver function during photochemotherapy. Of the 311 patients, only seven had transient elevations of transaminases. Incidence of hepatotoxicity of 8-MOP, TMP and 5-MOP showed 0.6%, 6% and 3%, respectively. Although the effects of psoralens on liver functions during photochemotherapy have been contradictory in humans and there have been few cases showing transient elevated values of liver transaminases during photochemotherapy, it is advisable to obtain serial liver function tests before and during photochemotherapy.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.