• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.595-600
• /
• 2001

Thermal mass flow meter(TMF) and thermal mass flow controller(MFC) were used to measure and to control the mass flow rate of gases. TMF and MFC were designed for specified working pressure and gas. For the case of different working pressure and gases, the flow rate measurement accuracy decreased dramatically. In this study, a TMF and MFC was tested with three different gases and pressure range from 0.2 MPa up to 1.0 MPa. Effect of specific heat causes to increase flow measurement error as much as ratio of specific heat compared with reference gas. Changing of pressure causes to increase flow rate measurement error about -0.2% as the working pressure decreased 0.1 MPa. Response time of MFC was below 3.12 s for the case of increasing of flow rate. But the response time was increased up to 6.92 s for the case of decreasing of flow rate. When the solenoid valve was fully closed, a initial delay time of output of MFC was increased up to 1.36 s.

• 한국결정성장학회지
• /
• 제19권5호
• /
• pp.215-222
• /
• 2009

Many concepts of external magnetic field applications in crystal growth processes have been developed to control melt convection, impurity content and growing interface shape. Especially, travelling magnetic fields (TMF) are of certain advantages. However, strong shielding effects appear when the TMF coils are placed outside the growth vessel. To achieve a solution of industrial relevance within the framework of the $KRISTMAG^{(R)}$ project inner heater-magnet modules(HMM) for simultaneous generation of temperature and magnetic field have been developed. At the same time, as the temperature is controlled as usual, e.g. by DC, the characteristics of the magnetic field can be adjusted via frequency, phase shift of the alternating current (AC) and by changing the amplitude via the AC/DC ratio. Global modelling and dummy measurements were used to optimize and validate the HMM configuration and process parameters. GaAs and Ge single crystals with improved parameters were grown in HMM-equipped industrial liquid encapsulated Czochralski (LEC) puller and commercial vertical gradient freeze (VGF) furnace, respectively. The vapour pressure controlled Czochralski (VCz) variant without boric oxide encapsulation was used to study the movement of floating particles by the TMF-driven vortices.

• Journal of Microbiology and Biotechnology
• /
• 제18권1호
• /
• pp.95-103
• /
• 2008

Mushrooms are regarded as one of the well-known foods and biopharmaceutical materials with a great deal of interest. Polysaccharide ${\beta}$-glucan is the major component of mushrooms that displays various biological activities such as antidiabetic, anticancer, and antihyperlipidemic effects. In this study, we compared the immunostimulatory potency of polysaccharide fractions, prepared from liquid culture of pine-mushroom Tricholoma matsutake, with a potent immunogen lipopolysaccharide (LPS), and their molecular mechanisms on the functional activation of macrophages. We found that fraction II (TMF-II) was able to comparably upregulate or highly enhance the phenotypic functions of macrophages such NO production and cytokine (IL-$1{\beta}$, IL-6, IL-12, and TNF-${\alpha}$) expression, to LPS. TMF-II triggered the phosphorylation of $I{\kappa}B{\alpha}$, a critical step for NF-${\kappa}B$ activation and translocation. Of the upstream signaling enzymes tested, Src and Akt were thought to be the responsible upstream signaling components in induction of NO production, although TMF-II strongly upregulated the phosphorylation of all MAPK pathways. Therefore, our data suggest that T. matsutake-derived ${\beta}$-glucan may exert its immunostimulating activities with similar potency to LPS via activation of multiple signaling pathways linked to NF-${\kappa}B$ activation.

• 품질경영학회지
• /
• 제35권3호
• /
• pp.37-46
• /
• 2007

Our society is increasingly dependent on the Internet, and this trend will be accelerating in the ear of All-IP convergence. As the core infrastructure of the All-IP convergence, the next generation Internet should enable end-to-end Quality of Service(e2e QoS). For that purpose, major international standardization institutes such as ITU(International Telecommunication Union) and IETF(Internet Engineering Task Force) are building the concept and architecture of the Next Generation Network(NGN). However, these institutes focus only on technical issues, and leave many business/policy-oriented challenges unresolved. For example, the standards raised by ITU assume that the entire service delivery process for e2e QoS services is perfectly working. But required is a standardized business interface and process for seamless inter-operations across many stakeholders including ISPs(Internet Service Providers), CPs(Content Providers), so on. On the other hand, TMF(TeleManagement Forum) and QuEST(Quality Excellence for Suppliers of Telecommunication) Forum, global consortiums of telecom operators and vendors, present sets of interface rules and process which playa crucial role as de facto standards: for example, NGOSS/eTOM and TL9000 authorization system. However, these standards focus on telephone services, and provide little principle for the next generation Internet. Our study seeks a way to combine these two strains for a successful implementation of NGN. In particular, we find a missing link in the NGN architecture and the elements that could be complemented with the help of NGOSS/eTOM and TL9000. Finally, presented is a strategic direction that our standardization policy should purse in order to reinforce our global leadership for the next generation Internet.

• 한국초지조사료학회지
• /
• 제34권1호
• /
• pp.45-51
• /
• 2014

본 연구는 버섯폐배지와 맥주박을 이용한 섬유질 발효사료의 급여효과를 알아보기 위해 흑염소의 생산성과 영양소 이용율을 조사하였다. 증체조사를 위한 사양 시험은 거세흑염소 20두를 이용하여 처리구당 5두씩 30일간 수행하였고, 소화율 시험은 거세흑염소 12두를 공시하여 처리구당 3두씩 라틴방각법으로 실시하여, 처리구는 대조구(배합사료 및 볏짚 급여구)와 3개의 시험구(버섯폐배지, 맥주박 비율이 각각 15와 25%(T1), 10과 30%(T2) 및 5와 35%(T3))로 각각 배치하였다. 일당증체량은 대조구와 T1구가 T3구 보다 유의하게 높게 나타났다(p<0.05). 1일 두당 건물섭취량과 유기물섭취량은 T1과 T2구가 대조구 보다 유의하게 높은 섭취량을 보였다(p<0.05). 건물소화율과 유기물소화율은 대조구와 T1구가 각각 62.39∼63.39%와 65.02~65.25%로 T3구의 각각 56.39와 59.01% 보다 유의하게 높게 나타났다(p<0.05). 질소축적량은 T1구가 가장 높게 나타났다(p<0.05). 따라서, 본 연구의 결과 버섯폐배지와 맥주박을 이용한 섬유질 발효사료는 시판사료를 급여한 대조구와 대등한 생산성과 영양소 이용율을 보였다. 그러나 버섯폐배지의 첨가 비율이 높아질수록 흑염소의 생산성 저하가 우려되므로 버섯폐배지 첨가는 25~30% 수준으로 배합하는 것이 필요하다 판단된다.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2007년도 춘계학술대회
• /
• pp.334-339
• /
• 2007

인터넷은, 전화로 대변되는 과거의 정보통신 서비스와는 달리 사회 전반에 막대한 영향력을 행사하는 서비스로 발전하였다. 인터넷에 대한 의존도는 향후 모든 정보통신서비스가 인터넷을 기반으로 제공되는 All-IP 디지털 컨버전스 시대에 더욱 더 심화될 것이다. 이 경우 오늘날의 인터넷보다도 QoS(Quality of Service)에 관한 이슈가 더욱 중요해질 것은 자명하다. 이러한 배경에서 ITU(International Telecommunication Union)나 IETF(Internet Engineering Task Force)등의 국제표준화 기구에서 차세대 인터넷 (Next Generation Network, NGN)에 대한 QoS 문제를 연구하고 있다. 그러나 이들 국제기구는 주로 기술공학적인 측면에서 QoS 문제에 접근하고 있어서 현실적으로 완전한 대안을 제공하지는 못하고 있다. 즉, 인터넷 산업의 특성상 사업자간 끊김없는 연동(seamless inter-operations)과 협력이 필수적인데, 이는 기술공학적 측면보다도 비즈니스 및 정책적 관점에서 다루어져야 되기 때문이다. 통신 사업자 및 벤더(vendor)의 글로벌 컨소시엄으로 출발한 TMF(TeleManagement Forum)나 QuEST Forum 등의 역할이 중요해지는 이유가 여기에 있다. 이미 이들 단체는 사업자간 합의에 의해 자발적으로 구축한 NGOSS 및 TL9000 인증시스템을 바탕으로, 망사업자를 비롯한 서비스공급자 및 벤더 등과의 원활한 협력관계를 구축하는 글로벌 de facto 표준을 마련한 바 있다. 본 연구에서는 QoS 보장을 목표로 하는 차세대 인터넷(NGN)의 현실적 성공 가능성을 높이기 위한 글로벌 표준화 노력을 소개하고 이들을 비교/검토한다. 특히, ITU 및 IETF 등의 NGN 개발계획을 비즈니스/정책점 관점에서 보완할 수 있는 TMF와 QuEST Forum의 접근법을 고찰하여, All-IP 컨버전스 환경에서의 QoS 이슈에 시사하는 바를 살펴본다.

• 한국자동차공학회논문집
• /
• 제18권3호
• /
• pp.133-142
• /
• 2010

The present work focuses on the characterization of material parameters of the Overlay(multilinear hardening) model for analyzing the non-isothermal cyclic deformation. In the previous study, all the parameters were especially based on the Overlay theories, and a simple method was suggested to find out the best material parameters for the isothermal cyclic deformation analysis. Based on the previous research this paper f dther improves the isothermal parameters and suggests how to apply the isothermal parameters to the non-isothermal conditions especially for the description of TMF(Thermo-Mechanical Fatigue) hysteresis behavior. The parameters are determined and calibrated using 400 series stainless steel test data in the reference papers. For the implementation into ABAQUS, a user subroutine is developed by means of ABAQUS/UMAT. The finite element results show good agreement with test for the case of uniaxial non-isothermal cyclic loading, signifying the proposed method can be used in the TMF analysis of the converter-inserted heavy duty muffler system and the stainless steel exhaust-manifold system which are to be done in our future research.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.188-193
• /
• 2000

A more accurate life prediction for gas turbine blade takes into account the material behavior under the complex thermo-mechanical fatigue(TMF) cycles normally encountered in turbine operation. An experimental program has been carried out to address the thermo-mechanical fatigue life of the IN738LC nickel-base superalloy. In the first phase of the study, out-of-phase and in-phase TMF experiments have been performed on uncoated and coated materials. In the temperature range investigated. the deposition of NiCrAlY air plasma sprayed coating did not affect the fatigue resistance. In the second phase of the study, a physically-base life prediction model that takes into account of the contribution of different damage mechanisms has been applied. This model was able to reflect the temperature and strain rate dependences of isothermal cycling fatigue lives, and the strain-temperature history effect on the thermo-mechanical fatigue lives.

• Current Optics and Photonics
• /
• 제2권3호
• /
• pp.233-240
• /
• 2018

We proposed a two-mode fiber (TMF) design that can effectively reduce the mode overlap between $LP_{01}$ and $LP_{11}$ modes by using a W-shaped index profile core structure, which is a primary concern in uncoupled mode division multiplexing (MDM). TMF has a three-layered core structure; central circular core, inner cladding, and outer ring core. We confirmed that in an optimal structure the $LP_{01}$ mode was highly confined to the central core while the $LP_{11}$ mode was guided along the outer ring core to result in a minimum overlap integral. We used a full-vectorial finite element method to estimate effective index, differential group delay (DGD), confinement loss, chromatic dispersion, and mode overlap controlling the parameters of the W-shaped structure. The optimized W-profile fiber provided optical characteristics within the ITU-T recommended standards over the entire C+L band.

• Applied Microscopy
• /
• 제45권3호
• /
• pp.170-176
• /
• 2015

In this work, various electron microscopy and analysis techniques were used to investigate the microstructural evolution of a 9% Cr tempered martensite ferritic (TMF) steel T91 upon ultrasonic nanocrystalline surface modification (UNSM) treatment. The micro-dimpled surface was analyzed by scanning electron microscopy. The characteristics of plastic deformation and gradient microstructure of the UNSM treated specimens were clearly revealed by crystal orientation mapping of electron backscatter diffraction (EBSD), with flexible use of the inverse pole figure, image quality, and grain boundary misorientation images. Transmission electron microscope (TEM) observation of the specimens at different depths showed the formation of dislocations, dense dislocation walls, subgrains, and grains in the lower, middle, upper, and top layers of the treated specimens. Refinement of the $M_{23}C_6$ precipitates was also observed, the size and the number density of which were found to decrease as depth from the top surface decreased. The complex microstructure and microstructural evolution of the TMF steel samples upon the UNSM treatment were well-characterized by combined use of EBSD and TEM techniques.