• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.3
• /
• pp.223-227
• /
• 2001

In this paper, the authors present the fabrication of high-yield Si thin-membranes by electrochemical etch-stop in tetramethyl ammonium hydroxide (TMAH): isopropyl alcohol (IPA):pyrazine solutions. The current-voltage (I-V) characteristics of n- and p-type Si in TMAH:IPA;pyrazine solutions were analysed, repsectively. Open circuit potential (OCP)and passivation potential (PP) of n- and p-type Si, respectively, were obtained and applied potential was selected between n- and p-type Si PPs. The electrochemical etch-stop method was applied to the fabrication of 801 micro-membranes with 20.0 $\mu\textrm{m}$ thickness on a 5" Si wafer. The average thickness of fabricated 801 micro-membranes on one wafer 20.03$\mu\textrm{m}$ and the standard deviation was ${\pm}$0.26$\mu\textrm{m}$. The Si surface of the etch-stopped micro-membranes was extremely flat with no noticeable taper or nonuniformity. The results indicate that use of the electrochemical etch-stop method for the etching of Si in TMAH:IPA;pyrazine solutions provides a powerful and versatile alternative process for fabricating high-yield Si micro-membranes.

• Transactions on Electrical and Electronic Materials
• /
• v.2 no.2
• /
• pp.26-31
• /
• 2001

This paper presents the electrochemical etch-stop characteristics of single-crystal Si(001) wafers in tetramethyl ammonium hydroxide(TMAH):isopropyl alcohol(IPA):pyrazine solutions. The addition of pyrazine to TMAH:IPA solutions increased the etch rate of (100) Si, thus the etching time required by the etch-stop process shortened. The current-voltage(I-V) characteristics of n- and p-type Si in TMAH:IPA:pyrazine solutions were obtained, respectively. Open circuit potential(OCP) and passivation potential(PP) of n- and p-type Si, respectively, were obtained and applied potential was selected between n- and p-type Si PPs. The electrochemical etch-stop method was used to fabricate 801 microdiaphragms of 20 ${\mu}{\textrm}{m}$ thickness on a 5-inch Si wafer. The average thickness of fabricated 801 microdiaphragms on one Si wafer was 20.03 ${\mu}{\textrm}{m}$ and the standard deviation was $\pm$0.26 ${\mu}{\textrm}{m}$. The Si surface of the etch-stopped microdiaphragm was extremely flat with no noticeable taper or nonuniformity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.584-584
• /
• 2012

결정형 실리콘 태양전지 공정 중 표면 texturing 공정은 표면에 요철을 형성시켜 반사되는 빛 손실을 줄여서, 증가된 빛 흡수 양에 의해 단락전류(Isc)를 증가시키는데 그 목적이 있다. 표면 texturing 공정은 습식 식각과 건식 식각에 의한 방법으로 나눌 수 있다. 습식 식각은 KOH, TMAH, HNA 등의 실리콘 식각 용액을 사용하여 공정상의 위험도가 크고, 사용 후 용액의 폐기물에 의한 환경오염 문제가 있다. 건식 식각은 습식 식각과 달리 폐기물의 처리가 없고 미량의 가스를 이용한다. 그리고 다결정 실리콘 웨이퍼처럼 불규칙적인 결정방향에도 영향을 받지 않는 장점을 가지고 있어서 건식 식각을 이용한 표면 texturing 공정에 관한 많은 연구가 진행되고 있으며, 특히 RIE(reactive ion etching)를 이용한 태양전지 texturing 공정이 가장 주목을 받고 있다. 하지만 기존의 RIE를 이용하여 표면 texturing 공정을 하게 되면 500 nm 이하의 needle-like 구조의 표면이 만들어진다. Needle-like 구조의 표면은 전극을 형성할 때에 접촉 면적이 좁기 때문에 adhesion이 좋지 않은 것과 단파장 대역에서 광 손실이 많다는 단점이 있다. 본 논문에서는 기존의 RIE texturing의 단점을 보완하기 위해 챔버 내부에 metal-mesh를 장착한 후 RIE를 이용하여 $1{\mu}m$의 피라미드 구조를 형성하였고, RIE 공정 시 ion bombardment에 의한 표면 손상을 제거(RIE damage remove etching)하기 위하여 10초간 TMAH(Tetramethyl -ammonium hydroxide, 25 %) 식각 공정을 하였다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.5
• /
• pp.728-737
• /
• 1996

The purpose of this study is to investigate the change of the chemical properties of wool treated with six kinds of alkali (NaOH, Naac03, NH40H, NH2CH3CH30H, TMAH and BTMAH) with or without CTAB. Content of bound fatty acid liberated from wool surface, elemental composition and allw6rden time were measured to compare the surface modification of untreated and alkali treated wool. Also, the chemical degradation of the fiber was investigated by measuring cystine contents and urea-hydrogensulfite solubility. The result were as follows: 1. By the alkali treatment of wool, the covalently bound fatty acid of the epicuticle was removed and the allworden time was shortened, and in the case of wool treated with TMAH, BTMAH, the allw6rden sacs were formed unevenly and rarely. Also, cystine contents and urea-hydrogensulfite solubility were decreased by alkali treatment on wool. 2. The modification of epicuticle and the chemical degradation of wool were occurred due to alkaline hydrolysis in the order of TMAH, BTMAH > NaOH, Na3c03> NH2CH3CHaOH, NH40H. 3. As a treating time increased, the modification of epicuticle and chemical degradation of wool were accelerated. By the addition of CTAB to the alkali solution, the modification of epicuticle was increase, and the cystine contents and urea-hydrogensulfite solubility were reduced than that of wool teated with alkli without CTAB due to reduction of negative charge on the wool surface by the adhesion of CTAB.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.66-67
• /
• 1998

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.2
• /
• pp.179-185
• /
• 2009

The esterification of the reactants of Jatropha oil and methanol added by propyleneglycol was done using p-TSA catalyst. And then the emulsification of triglyceride and methanol was conduced by 1.0vol% GMS. The emulsified reactants were transesterified at $65^{\circ}C$ using TMAH and mixed catalyst (50wt%-TMAH+50wt%-NaOH) respectively. The esterification conversion at the 1:8 molar ratio of free fatty acid to methanol using 8.0wt% p-TSA was 94.7% within 80min. The overall conversion at the 1:8 molar ratio of mixed fat(50wt% Beef Tallow) to methanol and $65^{\circ}C$ using mixed catalyst was 95.4% The cloud point of Biodiesel decreased with the addition of petroleum diesel.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.557-560
• /
• 2000

Combination of SDB(Si-wafer Direct Bonding) and electrochemical etch-stop in TMAH anisotropic etchant can be used to create a variety of MEMS(Micro Electro Mechanical System). Especially, fabrication of SDB SOI structures using electrochemical etch-stop is accurate method to fabrication of 3D(three-dimensional) microstructures. This paper describes on the fabrication of SDB SOI structures with sealed cavity for MEMS applications and thickness control of active layer on the SDB SOI structure by electrochemical etch-stop. The flatness of fabricated SDB SOI structure is very uniform and can be improved by addition of TMAH to IPA and pyrazine.

• Journal of Sensor Science and Technology
• /
• v.7 no.6
• /
• pp.426-431
• /
• 1998

This paper describes electrochemical etch-stop characteristics in THAH/IPA/pyrazine solution. I-V curves of n- and p-type Si in THAH/IPA/pyrazine solution were obtained. OCP(Open Circuit Potential) and PP (Passivation Potential) of p-type Si were -1.2 V and 0.1 V, and of n-type Si were -1.3 V and -0.2 V, respectively. Both n- and p-type Si, etching rates were abruptly decreased at potentials anodic to the PP. The etch-stop characteristics in THAH/IPA/pyrazine solution were observed. Since accurate etching stop occurs at pn junction, Si diaphragms having thickness of epi-layer were fabricated. Etching rate is highest at optimum etching condition, TMAH 25wt.%/IPA 17vol.%/pyrazine 0.1g/100ml. thus the elapsed time of etch-stop was reduced.

• Journal of the Semiconductor & Display Technology
• /
• v.2 no.4
• /
• pp.37-40
• /
• 2003

We have studied micro-machining technologies to fabricate parts and sensors used in the semiconductor equipment. The studies were based on the silicon integrated circuit processes, and composed of the anisotropic etching of single crystal silicon to fabricate a membrane structure for hot and cold junctions in the infrared absorber. KOH and TMAH were used as etching solutions for the anisotropic wet etching for membrane structure formation. The etching characteristic was observed for the each solution, and etching rate was measured depending upon the temperature and concentration of the etching solution. The different characteristics were observed according to pattern directions and etchant concentration. The pattern was made to incline $45^{\circ}$ on the primary flat, and optimum etching property was obtained in the case of 30 wt% and $90^{\circ}C$ of KOH etching solution for the formation of the membrane structure.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.293-294
• /
• 2008