• KIEE International Transactions on Electrophysics and Applications
• /
• v.2C no.6
• /
• pp.314-320
• /
• 2002

Three different ZnO nanomaterials (nanobelts, nanorods, and nanowires) were synthesized at 138$0^{\circ}C$ from ball-milled ZnO powders by a thermal evaporation procedure with an argon carrier gas without any catalysts. Transmission electron microscopy (TEM) revealed that the ZnO nanobelts are single crystalline with the growth direction perpendicular to the (010) lattice plane, and that the ZnO nanorods and nanowires are single crystalline with the growth directions perpendicular to the (001) and (110) lattice Planes, respectively. In cathodoluminescence (CL), the energy Position of the near band-edge (NBE) peak is 3.280 eV for the 100-, 250-, and 500-nm thick nanobelts, 3.262 eV for the 100- and 250-nm thick nanorods, and 3.237 eV for the 500-nm thick nanorods. The synthesized ZnO nanorods were coated conformally with aluminum oxide (Al$_2$O$_3$) material by atomic layer deposition (ALD). $Al_2$O$_3$films were then deposited on these ZnO nanorods by ALD at a substrate temperature of 300 $^{\circ}C$ using trimethylaluminum (TMA) and distilled water ($H_2O$). Transmission electron microscopy (TEM) images of the deposited ZnO nanorods revealed that 40nm-thick $Al_2$O$_3$ cylindrical shells surround the ZnO nanorods.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.4
• /
• pp.10-19
• /
• 2014

Despite the movement of safe traffic by the Korean government to reduce deaths in traffic accidents, the casualties increase year by year. In particular, more and more accidents and casualties are reported from car collisions from the back of the vehicles parked for managing traffic accidents on the road, cleaning main roads and medial strips, repairing roads. In order to response to these accidents, the government should take protective measures for road users. In the last decade, seventy-one cases have been reported to occur during highway repair and maintenance. As a result, eight persons were killed and seventy-six were injured, showing the high death rate of 11.3 percent. Therefore, it seems urgent to take some actions against it. The United States and European countries legislate that vehicles of road repair and maintenance should be mandatorily equipped with shock absorber at the back. Korea, however, does not have such legislative measures, which are needed at this time to protect workers on the road. This study compares the performance of the traditional shock absorber for road maintenance vehicles with that of the rear safety guard using air bag, manufactured in accordance with related laws in Korea. Based on the results of the 60km/h rear collision test, this paper proposes improvements in related laws and regulations in an attempt to reduce casualties.

• Journal of Photoscience
• /
• v.4 no.2
• /
• pp.41-48
• /
• 1997

The plasma membrane and microsomes, isolated from the cells treated with hematoporphyrm derivative (HpD) for 1 and 24 h, accumulated the aggregated porphyrin. The quantity of aggregated porphyrin was same in the plasma membrane and microsomes after isolating them from cells treated with HpD for 1 h whereas the microsomes accumulated higher quantity of aggregated porphyrin when cells were treated with HpD for 24 h. Photodynamic action of aggregated porphyrin on plasma membrane and microsomes was investigated using lipid specific fluorescent probes: 1,6-diphenyl-1,3,5-hexatrine (DPH) and 1-(4-trimethylammonium), 6-diphenyl-1,3,5-hexatrine(TMA-DPH). The time dependent anisotropy of these probes in the membranes was measured and the decay of anisotropy was analyzed using wobbling in cone model. Upon irradiation both the plasma membrane and the microsomes showed an increase in the limiting anis~)tropy and order parameter and a decrease in the cone angle of the lipid probes. The increase in the limiting anisotropy was pronounced in membranes isolated from the cells treated with HpD for 24 h. Photoinduced change in the limiting anisotropy was dependent on the duration of incubation of cells with HpD before isolating the membranes. In both the membranes. the membrane core was affected more as compared to the outer leaflet. In addition to the structural changes, a decrease in Na$^+$-K$^+$-ATPase and NADPH cyt c reductase activity was also observed upon irradiation of HpD treated cells. Inhibition in NADPH cyt c reductase was more when cells were treated with HpD for 24 h, however, Na$^+$-K$^+$-ATPase activity did not depend on the duration of the treatment of cells with HpD before irradiation. Our results suggest that the extent of photoinduced perturbations in the membranes varies as a function of duration of the treatment of cells with HpD and the membrane core is more susceptible to the photodynamic action of aggregated porphyrin.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.24 no.3
• /
• pp.484-489
• /
• 2010

Allergic contact or wound induced dermatitis are common environmental health issue and seriously affect the patient's quality of life. In now, people are interested in the korean herbal bathing that get better the skin conditions. This study was performed to investigate the effect of korean herbal bathing candidates extract on allergic contact or wound induced dermatitis. ICR mice were divided into four groups: naive, control, experimental group A and B. Control and experimental groups induced allergic contact or wound induced dermatitis by DNFB and TMA. Since then, each experimental group was pasted with corresponding korean herbal bathing extract into the skin. All groups were observed after 5 days. When the korean herbal bathing extract was applied, arbitrary skin wound index and epidermal thickness were significantly decreased compared to that of control. These data suggest that these korean herbal bathing candidates may be an effective therapeutic supplements for the treatment of skin.

• Korean Journal of Materials Research
• /
• v.1 no.4
• /
• pp.206-213
• /
• 1991

The crystallized solder glasses with the low melting temperature for electronic package were prepared with the compositions of 77-80wt% PbO, 4.5-6wt% ZnO, 7.5-8.5wt% $B_2O_3$, 1-2wt% CaO, and 0.5-2.0wt% $P_2O_5$ containing 3-7wt% $TiO_2$. The Characterization of the solder glasses were studied using DTA, SEM and XRD. Frit containing 3wt% $TiO_2$ had crytallzation temperature range of $420-440^{\circ}C$. The major crystalline phase was identified as $2PbO{\cdot}ZnO{\cdot}B_2O_3$ by X-ray diffraction. Frits containing 4 wt% $TiO_2$ consisted of crysalline Phases of $PbTiO_3$ and $2PbO{\cdot}ZnO{\cdot}B_2O_3$ in the temperature range of $420-440^{\circ}C$, When g1ass frit containing 5wt% $TiO_2$ were heat-treated in the temperature range of $440-460^{\circ}C$, major crytalline phase was perovskite lead titanate.

• Korean Journal of Materials Research
• /
• v.18 no.5
• /
• pp.235-240
• /
• 2008

This paper presents results and observations obtained from a study of the optical and thermal properties of alkali tellurite depending on the composition. Fourier transform infrared (FT-IR) spectra showed evidence of chemical modification from $TeO_4$ trigonal bipyramids (tbp) to $TeO_3$ trigonal pyramids (tp) in tellurite glasses. The optical band gaps of the different glass samples calculated using Tauc's method were found to range from 3.5-3.8 eV. The glass transition temperature (Tg) and glass stability (${\Delta}T$) of alkali tellurite glasses were investigated, as $M_2O$ [M: Li, Na, K] amounted to 25 mol%, through the use of differential thermal analysis (DTA). The coefficient of thermal expansion (CTE) was measured in a thermo mechanical analysis (TMA) with a slow heating rate after the glass samples were annealed. The results confirm that the optical band gap of alkali tellurite glasses depends on the Te-O-Te structural relaxation related to the ratio of bridging/non bridging oxygen (BO/NBO). In contrast, the thermal properties are related to the ionic field strength of the Te-O-M and M-O-M bonds, and the Te-O-Te breakage depends on the ratio of BO/NBO.

• Journal of Magnetics
• /
• v.6 no.4
• /
• pp.122-125
• /
• 2001

Phase relationships of the HDDR (hydrogenation, disproportionation, desorption and recombination)-treated Sm$_3$(Fe,M)$_{29}$-type alloy with chemical composition of Sm$_{9}$Fe$_{65}$ $Co_{20}$V$_{6}$ were studied by X-ray diffraction (XRD) and by thermomagnetic analysis (TMA). The alloy was disproportionated into a mixture of $SmH_{x}$ and $\alpha$-Fe at high temperature under hydrogen gas. The disproportionated material was recombined into a mixture of Sm-(Fe,M) (M = Co and/or V) and $\alpha$-Fe phases. The structure of the Sm-(Fe,M) phase was dependent upon the recombination conditions, and a detailed phase diagram showing the phase relationships in the HDDR-treated alloy has been established. The Sm-(Fe,M) phase in material recombined above $900^{\circ}C$ had the $Sm_2Fe_{17}$-type structure, and it exhibited the $SmFe_{7}$-type structure when recombined at temperatures ranging from $700^{\circ}C$ to $850^{\circ}C$. Recombination below $650^{\circ}C$ led to the $SmFe_3$-type structure of the Sm-(Fe,M) phase. Curie temperatures of the Sm-(Fe,M) phases in the recombined material were significantly higher than those of the corresponding stoichiometric phases. It was suggested that the chemical composition of the Sm-(Fe,M) phases may be significantly different from that of the corresponding stoichiometric phases. All the HDDR-treated $Sm_{9}Fe_{65}Co_{20}V_{6}$ materials showed the soft magnetic features regardless of the phase constitution.n.

• Korean Journal of Food Science and Technology
• /
• v.36 no.5
• /
• pp.711-716
• /
• 2004

Gamma irradiation was applied to dried pollack to improve its microbiological quality and evaluate quality stability of irradiated samples. Thermoluminescence (TL) properties of minerals separated from irradiated samples were measured for possible use in identifying irradiation treatment. Dried pollack was packaged in commercial unit (PVC film, 0.06 mm thickness) and stored at $15{\pm}1^{\circ}C$ for 6 months. Samples showed over $10^4\;CFU/g$ in total aerobic bacteria or yeasts&molds, which increased during storage, reaching $10^6-10^7\;CFU/g$ at 3rd month of storage. Irradiation at 3 kGy was effective for improving hygienic quality for 6 months, keeping microbial population under 20 CFU/g. Gamma irradiation at 3 kGy or less did not significantly influence physicochemical quality attributes, such as browning, TBA value, volatile basic nitrogen, trimethylamine, and sensory properties, whereas storage time remarkably induced quality changes of dried pollack. TL analysis was proved suitable for identifying irradiated from non-irradiated samples over 6 months of storage.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.2
• /
• pp.30-37
• /
• 1994

Since the morden targets are of high speed and getting quiet in both active and passive mode, the necessities of developing advanced SONAR system capable of performing target motion analysis (TMA) and target classification are evident. In order to develop such a system, the scattering mechanism of complex bodies needs to be, some extent, fully understood and modeled. In this paper, MOving Spread Target(MOST) signal simulation model is presented and discussed. The model is based on the highlight distribution method, and simulates pulse elongation of spread target, doppler effect due to kinematics of the target as well as SONAR platform, and distribution target strength of each highlight point (HL) with directivity. The model can be used in developing and evaluating advanced SONAR system through system simulation, and can also be used in the development of target state estimation algorithm.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.2
• /
• pp.153-160
• /
• 2013

PURPOSE. This in vitro study intended to investigate the mechanical and thermal characteristics of Valplast, and of polymethyl methacrylate denture base resin in which different esthetic fibers (E-glass, nylon 6 or nylon 6.6) were added. MATERIALS AND METHODS. Five groups were formed: control (PMMA), PMMA-E glass, PMMA-nylon 6, PMMA-nylon 6.6 and Valplast resin. For the transverse strength test the specimens were prepared in accordance with ANSI/ADA specification No.12, and for the impact test ASTM D-256 standard were used. With the intent to evaluate the properties of transverse strength, the three-point bending (n=7) test instrument (Lloyd NK5, Lloyd Instruments Ltd, Fareham Hampshire, UK) was used at 5 mm/min. A Dynatup 9250 HV (Instron, UK) device was employed for the impact strength (n=7). All of the resin samples were tested by using thermo-mechanical analysis (Shimadzu TMA 50, Shimadzu, Japan). The data were analyzed by Kruskal-Wallis and Tukey tests for pairwise comparisons of the groups at the 0.05 level of significance. RESULTS. In all mechanical tests, the highest values were observed in Valplast group (transverse strength: $117.22{\pm}37.80$ MPa, maximum deflection: $27.55{\pm}1.48$ mm, impact strength: $0.76{\pm}0.03$ kN). Upon examining the thermo-mechanical analysis data, it was seen that the E value of the control sample was 8.08 MPa, higher than that of the all other samples. CONCLUSION. Although Valplast denture material has good mechanical strength, its elastic modulus is not high enough to meet the standard of PMMA materials.