This paper presents a design of the electromagnetic pump with an tubular type linear induction motor(TLIM). The TLIM was designed for the fluid system, flow rate $15[{\ell}/min]$, and the thrust 39[N] at 0.29[m/s]. The TLIM is compared measurement with analysis. The electromagnetic pump of flow characteristics are calculated by treating TLIM thrust as a source term in the Navier-Stokes equation. The numerical analysis of flow characteristics of the liquid metal is presented for the various condition and discussed.
본 논문에서는 원통형 선형유도전동기를 이용한 순환식 유동시스템에서의 유체특성을 해석하였다. 먼저 유동시스템에 필요한 추력 40[N] 원통형 선형유도전동기를 등가회로법과 유전알고리즘을 이용하여 설계하였다. 이 힘이 유체시스템에 작용하는 경우 유체의 특성은 유체방정식과 전자기 방정식을 결합하여 해석하여야 한다. 본 논문에서는 유체의 속도에 따라 층류해석과 난류해석이 가능한 해석프로그램을 개발하고, 각각에 대한 유충특성 해석을 하였다. 또한 전자기력에 의한 추력이 시스템에 추가되었을 때의 특성을 분석하였다.
DAG 합성율이 가장 높은 몰비율을 선정하기 위하여 GMO와 CLA의 몰비율을 1:1, 2:1 그리고 3:1로 하고 Lipozyme TLIM은 기질 질량의 20%를 사용하여 반응하였다. 그 결과 총 DAG의 함량은 1 hr일 때 높게 나타나 몰비율이 1:1, 2:1, 3:1(GMO:CLA)일 경우 각각 42.6, 54.4 그리고 54.6 area%로 나타났고, DAG 함량이 높은 2:1과 3:1의 기질몰비율 조건 중 MAG와 TAG의 함량이 낮았던 2:1 비율을 가장 적합한 비율로 선정하였다. 적합한 몰비율로 선정된 GMO와 CLA의 몰비율 2:1에 효소량을 2%, 5%, 10% 그리고 20%를 사용하여 효소량에 따른 DAG 합성율을 살펴 본 결과, 효소량을 10% 사용하였을 경우, 반응 6 hr에서 56.2 area%의 가장 높은 DAG 함량을 나타내었다. 이어 Lipozyme TLIM을 10% 사용하여 GMO와 CLA의 몰비율 2:1에 molecular sieves를 전체 기질 질량의 10% 사용하여 molecular sieves 첨가의 유, 무에 따른 DAG 합성율을 알아보았다. 그 결과 효소량을 5%를 사용하여 반응하였을 경우 molecular sieves를 첨가하지 않았을 때보다 총 DAG 함량이 약 30%의 증가율을 보였고, 효소량을 10% 사용하였을 경우 23%의 증가율을 보였다. 이상에서 DAG가 가장 많이 합성된 반응조건은 몰비율이 GMO와 CLA가 2:1이고, Lipozyme TLIM과 molecular sieves의 양이 각각 기질 질량의 10%씩 사용되었을 때이었다. 이 반응 조건으로 6 hr 반응하였을 때 최대의 DAG량이 생성되어 그 함량은 69 area%로 나타났으며, 1,3-DAG과 1,2-DAG의 지방산 조성변화를 살펴 본 결과 1,2-DAG의 지방산 조성 중 CLA의 함량은 반응 시간이 지날수록 증가한 반면, 1,3-DAG의 CLA 함량은 1 hr에서 24 hr까지 증가하였다가 72 hr에서 감소함을 보였다.
This paper presents the analysis method of TLIM, for the purpose of developing linear induction motor drive for elevators. The transfer matrix to multilayer on cylindrical coordinate is derived. The equivalent circuit constructed from coupling complex phasor makes it possible to obtain characteristics of TLIM. The validity of the method lo verified by comparing the experimental and theoretical results for a pilot machine in locked status.
The purpose of this paper is Characteristics Analysis according to thickness of Secondary Conductor in Tubular Linear Induction Motor(TLIM). Linear motors make good used of several applications as pumps and linear actuator. Characteristic equations of TLIM are obtained form voltage equation. And parameters of voltage equation are calculated.
Kim, Chang-Eob;Jeon, Mun-Ho;Kwon, Jeong-Tae;Lim, Hyo-Jae;Lee, Suk-Won
Journal of Electrical Engineering and Technology
/
제5권2호
/
pp.270-275
/
2010
An electromagnetic pump using a tubular induction motor (TLIM) has been proposed to pump liquid metal fluids. TLIM has been designed for liquid metal flow systems with a motor with a thrust force of 40~77[N]. The flow characteristics have been investigated by solving the Navier-Stokes equation, where the Lorentz force was included simply by considering it as a constant in the Navier-Stokes equation. A wood metal was chosen to simulate the liquid metal. The effect of Lorentz force on the flow rate was investigated. An experiment was conducted and its results were compared with those of the simulation. The simulation result showed an overestimation of about 17% compared with the experimental one.
PMF와 stearic acid를 기질로 하고, TAG의 sn-1,3 위치에 특이적으로 작용하는 lipozyme TLIM을 이용해 항온교반수조($70^{\circ}C$, 180rpm)에서 개질된 PMF(팜중부유)를 얻었다. 효소량을 20 wt%를 사용하였을 경우, 가장 높은 stearic acid 결합율을 보인 PMF와 stearic acid의 몰 비율은 1:2였고, 1:1.5와 비교적 비슷한 함량을 나타내었다. 이에 반해 1:0.5는 가장 낮은 결합율을 보였다. PMF와 stearic acid의 몰 비율 1:2일 때, 효소량을 20 wt% 사용하여 반응한 경우 stearic acid의 함량은 31.6%까지 증가한 반면, 효소량을 10wt% 사용하였을 때는 13.4%까지 증가하여 효소량을 20wt% 사용했을 때보다 2.4배 낮은 함량을 보였다. RP-HPLC 분석결과 반응 기질로 사용된 PMF는 대부분이 POP로 93.27 area%를 차지하였고, 효소 첨가량 20 wt%, PMF와 stearic acid의 몰 비율 1:2로 36 hr 반응한 시료의 TAG 조성은 7 hr 반응했을 때에 비하여 POP가 크게 감소(7 hr: 33.4 area%, 36 hr: 6.21 area%)하였다. 하지만 반응이 진행됨에 따라 크게 증가할 것으로 예측했던 POS(PSO)의 경우 7 hr 반응했을 때보다 2.61% 감소하였다. 반면 7 hr 반응했을 때 보다 PPS는 약 1.9배, PSS는 약 6.7배 증가하는 경향을 보였다. 이로써 lipozyme TLIM으로 반응할 경우 반응시간이 지날수록 acyl migration 현상이 증가하는 것으로 예측되었다. 효소 첨가량 20 wt%, PMF와 stearic acid의 몰 비율 1:2로 36 hr 반응 후 시료의 TAG 중 sn-2 position에는 oleic acid 함량이 5.4%로 낮았고 palmitic acid와 stearic acid의 함량은 각각 50.1%, 43.7%로 나타났다. 이로써 개질된 PMF에서 효소의 sn-1,3 위치 특이성이 나타나지 않은 것으로 예측되었다.
This paper presents an optimum design of the electromagnetic pump with an tubular type linear induction motor(TLIM). For obtaining the maximum flow rate, the TLIM is optimized using genetic algorithm.
Glycerol과 oleic ethyl ester와의 반응, 그리고 glycerol과 oleic acid와의 반응에서는 DAG가 생성되지 않았었지만 GMO와 SBO를 기질로 사용한 반응에서는 DAG가 생성됨을 확인하였다. 기질의 몰 비율에 따른 DAG 생성율을 비교하기 위하여 효소량을 기질 질량의 20%로 동일하게 설정하고 SBO와 GMO의 몰비율을 각각 2:1, 1:1과 1:2로 하여 반응한 결과, 1 hr 후 DAG의 함량이 최대로 도달 하였고 그 후에는 큰 차이를 보이지 않았다. 1hr에서 가장 큰 DAG 함량을 보인 몰비율은 1:1과 1:2(SBO:GMO)일 때로 각각 20.0, 20.4 g/100 g oil로 나타났고, 이 두 몰비율 중 TAG 함량이 낮았던 1:2 몰비율을 이용하여 DAG를 합성 하였다. 한편, 효소의 사용량에 따른 DAG 생성율을 비교하기 위하여 SBO와 GMO의 몰비율을 1:2로 동일하게 설정하고 효소량을 기질 질량의 2, 5, 10, 20%로 하여 반응한 결과, 1 hr의 DAG 함량은 각각 10.8, 14.0, 16.9, 20.4 g/100 g oil로 나타났다. 1 hr 이후의 DAG 생성량을 보면 효소량을 20% 사용한 경우, 72 hr까지 18.9-22.0 g/100 g oil로 비슷한 함량을 나타내었으나 효소량을 기질 질량의 2, 5, 10%를 사용하였을 경우, 1 hr 이후에도 DAG 함량이 증가하는 경향을 보였다.
This paper presents the flow characteristics in the fluid circulation loop using the tubular type linear induction motor(TLIM) electromagnetic pump. A TLIM pump was designed using the equivalent and genetic algorithm for the flow system of 40[1/min]. The flow characteristics are analyzed by coupling the Maxwell equations with the Navier-Stokes equation. The analysis algorithm also takes account of the effects of the thrust. The flow characteristics are analysed with the proposed method and compared with the commercial program and experiment and discussed.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.