• Journal of radiological science and technology
• /
• v.38 no.2
• /
• pp.155-161
• /
• 2015

This study confirmed the correlation between the change of the cooling water in internal cooling system and the size of the ablation site of bovine liver in RF heat treatment equipment. The bovine liver was resection with $4{\times}4{\times}4cm^3$ in 2cm cool-tip and with $6{\times}6{\times}6cm^3$ in 3cm cool-tip for the experiments. Area and perimeter of the ablation site for bovine liver were measured by Freehand techniques of MRI. It showed area and perimeter decreased during cool-tip temperature rises 6 and 12 minutes ablation using a 2cm and 3cm cool-tip. The correlation of cool-tip temperature and area and perimeter was statistically significant the result are shown(p=.000). The measurements of area and perimeter were more accurate with MRI in actual measurements and MRI for ablation range. The statistical results using Paired sample T-test was also significant(p=.038). The ablation range of bovine liver decreased according as cooling water temperature increases in RF heat treatment equipment for reason of carbonization occurred due to does not accurately pass the RF energy. Therefore, it is considered the effect of RF heat treatment would be increased if the temperature of the cooling water consistently maintain the low temperature in order to reduce the generation of carbide at RF heat treatment and RF energy is delivered accurately.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.4
• /
• pp.389-398
• /
• 1984

The effect of N forms ($NO_3{^-}-N$, $NH_4{^+}-N$) and concentrations (4, 8, $16meq/{\ell}$) which were changed at head formation stage on the tip-burn incidence of chinese cabbage was studied under the three levels (0, 8, 16 meq/l) of Ca. All of the plants grown on $NH_4{^+}-N$ showed the symptoms of tip-burn and low yields regardless of Ca levels. Roots of plants grown on $NH_4{^+}-N$ were severely damaged. The pH of the leachate from $NH_4{^+}-N$ pot was decreased to below pH 5. Plants which had been grown on $NH_4{^+}-N$ before the head formation stage, but changed to $NO_3{^-}-N$ were recovered from abnormal growth. But, the reverse showed the tip-burn symptoms. $NH_4{^+}-N$ treatments increased the T-N contents, but lowered K and Ca contents of inner leafblades. Icreased applications of Ca did not affect the T-N and K contents of the inner leafblades. $NH_4{^+}-N$ suppressed Ca translocation into the inner leaves from outer leaves after the head formation stage, but $NO_3{^-}-N$ accelarated it. Ca contents were much lower in leaves showing tip-burn symptoms than in healthy leaves. Internal rot which is a tip-burn symptom occuring after head formation were noted in plants applied with high concentration of $NO_3{^-}-N$ both before and after the head formation stage. Ca contents correlated well with the rates of Ca application, but there was no correlation between ca conents and internal rot incidence. Chinese cabbage tip-burn is not caused by Ca deficiency, as is commonly believed, but rather by the water stress (95% water contents in $NO_3{^-}$-fed plants, 91% in $NH_4{^+}$-fed plants) resulting from root damage caused by ammonium toxicity. Internal rot is also caused by excess applications of nitrogen, and is unaffected by calcium levels.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.7 no.3
• /
• pp.171-180
• /
• 2002

The temporal and spatial distributions of phosphorus have been investigated in the Gomso Bay, Korea. TP, PIP, TOP and DIP in sediment were found 548.8mg P kg$^{-1}$ , 426.1mg P kg$^{-1}$ , 122.6mg P kg$^{-1}$ , and 0.217mg P kg$^{-1}$ , respectively with a decreasing order of PIP>TOP>DIP. Any temporal or spatial trend has not been found on the distribution of TP in the sediment, except the high TP values near the mouth of Julpo-chun. We found seasonal patterns high TOP(28.90% of TP) and low TIP(71.10% of TP) in August, but low TOP(15.63% of TP) and high TIP(84.38% of TP) in November. There were three times higher DIP concentration in August than in November. Such case is probably not only due to the enhanced supply of DIP directly from the decomposition of organic matter from overlying water in summer, but also the released phosphate from the adsorbed particulate matter such as PIP under the low pH and Eh conditions at the subsurface layers of the sediment induced by the active microbial respiration of increased organic materials in summer. Primarily, the source of phosphorous from municipal sewage strongly influenced the early stage of the distribution of all the phosphorous in the Gomso tidal flat. Notwithstanding, through the processes of diagenesis in sediment, water temperature and organic contents probably functioned as the key parameters to control the temporal distributions of TOP, TIP and DIP in the Gomso tidal flat.

• Journal of Plant Biotechnology
• /
• v.35 no.1
• /
• pp.75-80
• /
• 2008

In vitro culture of shoot tip of garlic (Allium sativium L. cv. Seosan) was carried out to find medium condition of the induction of multiple shoots and bulbing for muliproduction of virus-free seed bulbs. For this work, tank culture was introduced. In shoot tip culture on MS solid medium the induction of multiple shoots and bulbing were better by adding 3% sucrose than 8%. Supplementation with 2mg/L 2ip and 0.2 mg/L IAA in this medium was effective. Three point three shoots including 2.7 bulbs were formed from a shoot tip after cultivation for 30 days on this medium. Bulbing of garlic in liquid culture with plastic water tank of 20L supplied air at the side of the lower part was better by adding 3% sucrose than 8% by subculture for 45 days with shoots obtained from shoot tip culture for 30 days on soid MS medium. Shoot growth was vigorous at 3% sucrose however bulb growth was more effective on the medium of 8% sucrose. Because of the effectiveness on solid medium added 3% sucrose, 2 mg/L 2ip and 0.2 mg/L IAA for initial production of multi-shoot in stem tip culture and the effectiveness in liquid culture with water tank for growth of bulbs, the method of two-step culture could be introduced for the multiple production of seed bulb of high quality. It was more desirable by supply of 0.2 mg/L BA and 0.02 mg/L NAA at tank culture time. But growth of the bulbs became poor by increasing concentration of NAA of the medium.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.120-125
• /
• 2016

용매화 된 이온들간의 상호작용은 화학을 비롯한 여러 분야에서 중요하게 다뤄지고 있다. 계산화학에 있어 다양한 용매에 용매화 된 이온들간의 상호작용은 분자동력학 시뮬레이션(MD)을 이용한 PMF 계산을 통해 많이 연구되어 왔는데, 본 그룹에서는 물을 표현할 수 있는 다양한 모델과 Salt solution 하에 Na+ 이온과 Cl- 이온 사이 상호작용을 PMF 계산을 통해 알아보았다. 첫 번째로 Polarizable water model인 Tip4p-fq를 사용한 PMF 계산 결과는 아직 진행 중에 있으며 결과적으로는 기본적으로 CHARMM water force field에서 제공해주는 Tip3p 모델 및 양자계산 방법 중 하나인 Ab initio를 이용한 결과와 비교, 분석 할 예정이다. 두 번째로 1M/2M/5M Salt solution의 서로 다른 농도를 사용하여 시뮬레이션 한 결과 1M과 2M에서는 물 속에서 시뮬레이션 한 결과와 큰 차이가 없었으나 농도가 짙은 5M 용매 내에선 $Na^+$이온과 $Cl^-$이온 사이 거리가 멀어질수록 주변 Salt에 영향을 받는 것을 확인 할 수 있었다. 결론적으로 본 연구를 진행함으로써 우리는 서로 다른 전하를 갖는 이온 사이 상호작용에 대한 이해를 더 높일 수 있었다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.4
• /
• pp.268-273
• /
• 2013

This study aims to investigate contamination level and effective clinical disinfection methods of dental air/water syringes (AWS) by using microbial incubation. This study used AWS of ten dental unit chairs of Hospital. Total 180 samples were obtained. There are six groups of samples: non-sterilized (group 1), sanitized with wet-gauze (group 2), sanitized with 78% ethanol sponge for 10 seconds (group 3), sanitized with 78% ethanol sponge for 20 seconds (group 4), sanitized with 1 : 100 diluted High Level Disinfectant$^{(R)}$ (group 5), autoclaved (group 6). Group 1 and 2 showed statistically significant level of CFUs than Group 4, 5 and 6 (p < 0.05). Group 4, 5 and 6 did not show any noticeable CFU. Sanitizing AWS tips with ethanol and High level Disinfectant$^{(R)}$ proves to be a useful and practical method for preventing cross-infections.

• Restorative Dentistry and Endodontics
• /
• v.46 no.4
• /
• pp.51.1-51.13
• /
• 2021

Objectives: This study aimed to evaluate the effect of improper positioning single-peak and multi-peak lights on color change, microhardness of bottom and top, and surface topography of bulk fill and incremental composites after artificial aging for 1 year. Materials and Methods: Bulk fill and incremental composites were cured using multi-peak and single-peak light-emitting diode (LED) following 4 clinical conditions: (1) optimal condition (no angulation or tip displacement), (2) tip-displacement (2 mm), (3) slight tip angulation (α = 20°) and (4) moderate tip angulation (α = 35°). After 1-year of water aging, the specimens were analyzed for color changes (ΔE), Vickers hardness, surface topography (Ra, Rt, and Rv), and scanning electron microscopy. Results: For samples cured by single-peak LED, the improper positioning significantly increases the color change compared to the optimal position regardless of the type of composite (p < 0.001). For multi-peak LED, the type of resin composite and the curing condition displayed a significant effect on ΔE (p < 0.001). For both LEDs, the Vickers hardness and bottom/top ratio of Vickers hardness were affected by the type of composite and the curing condition (p < 0.01). Conclusions: The bulk fill composite presented greater resistance to wear, higher color stability, and better microhardness than the incremental composite when subjected to improper curing. The multi-peak LED improves curing under improper conditions compared to single-peak LED. Prevention of errors when curing composites requires the attention of all personnel involved in the patient's care once the clinical relevance of the appropriate polymerization reflects on reliable long-term outcomes.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.3
• /
• pp.315-322
• /
• 1991

In a recent $paper^1$ we reported equilibrium (EMD) and non-equilibrium (NEMD) molecular dynamics simulations of liquid argon using the Green-Kubo relations and NEMD algorithms to calculate the thermal transport coefficients-the self-diffusion coefficient, shear viscosity, and thermal conductivity. The overall agreement with experimental data is quite good. In this paper the same technique is applied to calculate the thermal transport coefficients of liquid water at 298.15 K and 1 atm using TIP4P model for the interaction between water molecules. The EMD results show difficulty to apply the Green-Kubo relations since the time-correlation functions of liquid water are oscillating and not decaying rapidly enough except the velocity auto-correlation function. The NEMD results are found to be within approximately ${\pm}$30-40% error bars, which makes it possible to apply the NEMD technique to other molecular liquids.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.3
• /
• pp.255-260
• /
• 2008

STATEMENT OF PROBLEM: Preparation of implant beds with lasers is considered a safe and reliable method, but the accuracy of this technique has not been examined. PURPOSE: The purpose of this study was to evaluate the accuracy and effectiveness of implant bed preparation using an Er,Cr:YSGG laser. MATERIAL AND METHODS: An Er,Cr:YSGG laser was applied to pig rib bone. The laser was employed at a 5.75 W power setting, 30 Hz/sec pulse repetition, and 70 ${\mu}s$ pulse duration with 50 % water and 60% air spray. According to laser tips the groups were divided as follows; Group 1: paralleled - shaped sapphire tip (0.6 mm${\Phi}$), Group 2: paralleled - shaped zirconia tip (0.6 mm${\Phi}$), Group 3: tapered sapphire tip (0.4 mm${\Phi}$). The Er,Cr:YSGG laser tip was separated by 1 mm from the bone and applied for 15 seconds in a non-contact mode. After the application, the bone was sectioned for specimens. Histologic measurements were determined by computerized morphometry. The length of the prepared bone surface was measured and the width of the entrance was measured. The results were analyzed with one-way ANOVA (P<0.05). RESULTS: The prepared length of group 3 was longer than that of group 2. The prepared bone width was larger than the width of the laser tip in every group. Additional bone removal was observed adjacent to the prepared area and displayed an irregular surface. CONCLUSION & DISCUSSION: Different cutting effects were observed according to the laser tip, emphasizing the importance of proper tip selection in the clinical setting. This preliminary study supported the existence of hydrokinetic effects.

• Journal of Animal Science and Technology
• /
• v.50 no.3
• /
• pp.417-428
• /
• 2008

An experiment was conducted with 80 male rats for 4 weeks to investigate the effect of water soluble extracts(WSE) from different sections of farmed Elk(Cervus elaphus) antler on lipid metabolism and hematology. Antlers were divided into four sections of tip, upper, middle and base. Water soluble extract(35g/60ml) was prepared from each section of antler, and was administered orally to male Sprague- Dawley rats(10ml/kg body weight) once a day. Administration of WSE from upper, middle and base sections of antler decreased(P<0.0027) AST values at 3 weeks of feeding, however AST value was decreased(P< 0.0136) in the WSE of base section compared to that of control at 4 weeks of feeding. Administration of antler WSE for 4 weeks decreased total cholesterol in visceral fat(P<0.0035) and liver(P<0.0003) at 4 weeks of feeding compared to those of control. Feeding antler WSE for 4 weeks increased the compositions of C14:0(P<0.0037), C16:1(P<0.0061), C18:1(P<0.0066), C18:2(P< 0.0069) and C18:3(P<0.0035) in the visceral fat compared with that of control.