• Horticultural Science & Technology
• /
• v.18 no.6
• /
• pp.787-791
• /
• 2000

Lettuce seedlings used in this investigation of planting distance and labor-saving efficiency were first grown in 100-hole paper trays for 30 days. Seedling height for transplanting ranged from 3 cm to 6 cm and plants had 3 to 5 leaves. The beds prepared for transplanting were of the arched type and were 35-40 cm in width, 15-20 cm in bed height, and between-bed furrow width was 20 30 cm. Typical seedling planting depth with the transplanter was 4-5 cm, although depth was quite variable because of the irregularities of the ground. Total transplanting time with the transplanter varied from 2.6 to 2.7 hours per 10a, while it took 38.1 hours per 10a with conventional planting. It was critical that the condition of both the seedlings and the bed be adjusted to the transplanter before planting. Considering yield and inter-plant distance, optimal transplanter performance resulted with $60{\times}20cm$ or $60{\times}25cm$spacing, and the labor-saving efficiency using the transplanter was improved by over 93% of that of conventional planting by hand.

• Membrane Journal
• /
• v.2 no.1
• /
• pp.21-32
• /
• 1992

Hydrogen-permselective silica membranes were synthesized within tim walls of porous Vycor tubes by chemical vapor depostion of $SiO_2$. Film deposition was carried out using $SiCl_4$ hydrolysis either in the oppm shag reactants or in the one-sided geometry. At temperatures above $600^{\circ}C$ the permeation rate of hydrogen thorough the silica films varied between 0.01 and $025cm^3(STP)/cm^2-min-atm$ depending on the reaction geometry and the $H_2 : N_2$ permeation ratio was about 1000. Permeation rates of both $H_2$ and $N_2$ increased with increasing temperature. The silica membranes produced by one-sided deposition have higher hydrogen permmeation rates than those produced by the opposing reactants geometry although the membranes formed in an opposing reactants geometry were relatively stable during the heat treatment or after exposure to ambient air. These membranes can be applied to high temperature gas separations or membrane reactors once the film deposition process is optimized to get high permeability as well as good stability.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.8
• /
• pp.77-86
• /
• 2023

The background of this study lies in the increasing economic value of Korean fonts and the necessity for font development focused on small character design suitable for the mobile environment. The objective of this study is to analyze and propose strategies to improve readability on mobile screens. The research was conducted by applying eight attributes that could enhance readability according to Tim Ahrens to the design process of a Korean mobile font, adjusting Google's Noto Sans Korean for print/publishing and for small sizes. The results of the study indicate that 1. type width should be increased, 2. open counter (interior space) should be increased, 3. closed counter should be decreased, 4. font weight should be increased, 5. stroke contrast should be decreased, 6. spacing between characters should be increased. Therefore, distinct font families should be provided, differentiating between print/publishing and mobile use, as well as varying font weights and sizes, applying readability and legibility enhancement techniques for Korean fonts.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.58-65
• /
• 2020

3D Models of offshore plant piping materials designed by 3D CAD systems are provided to the production processes in the form of 2D piping drawings and 2D piping installation drawings. In addition to the standard engineering information, the purchasing, procurement, manufacturing, installation, and inspection of raw materials are managed systematically in an integrated process control system. The existing integrated process management system can help reduce the processing time by managing the flow and progress of resources systematically, but it does not include 3D design model information. Hence, it is difficult to understand complicated pipe structures before installing the pipe. In addition, when design changes or immediate design modifications are required, it is difficult to find related data or exchange information quickly with each other. To solve this problem, an offshore plant-piping process-monitoring system was developed based on a 3D model. The 3D model-based piping monitoring system is based on Visual Studio 2017 C# and UNITY3D so that the piping-process work information can be linked to the 3D CAD model in real time. In addition, the 3D model could check the progress of the pipe installation process, such as block, size, and material, and the progress of functional inspection items, such as cleaning, hydraulic inspection, and pneumatic inspection.

• Journal of the korean veterinary medical association
• /
• v.34 no.10
• /
• pp.715-725
• /
• 1998

우리 사람들은 자신의 생각을 다른 사람들에게 전하고자 할 때 언어를 주로 이용하고 보조적인 수단으로 몸짓을 한다. 사용하는 언어가 달라 소통이 어려울 때는 부득이 몸짓으로만 서로 의견을 나누게 되는데 손짓과 발짓은 물론 얼굴의 표정까지 동원된다. 물론 언어를 이용한 의사전달 만큼 정확하지도 못하고 시간적으로도 효율적이지 못하지만 그런 대로 급한 문제는 해결할 수 있는 경우가 않다. 동물들이 서로의 의사소통을 위하여 어떤 형태의 언어 및 언어에 가까운 음성기호를 이용할 능력이 있는지에 대하여는 학자들 간에도 논란이 계속되고 있으나 분명한 것은 어떤 방법으로든 동물들도 제나름대로 자신의 의사를 전달하고 또한 상대편이 전하고자 하는 뜻을 파악하여 이에 적절히 대처를 한다는 점이다. 이런 점에서 동물들을 대상으로 하는 학문인 수의분야에서는 우리 인간들에게 익숙한 언어와 행동이 아닌 동물들의 독특한 의사전달 방법을 정확히 이해하는 것이 무엇보다도 중요하다는 점을 인식하는 것이 필요하다 동물의 행동 하나 하나는 인간의 행동과 마찬가지로 나름대로의 의미를 지니고 있다. 이러한 동물의 행동을 인간의 눈 높이에서가 아닌 동물이 표현하고자 하는 행동 언어적인 측면에서의 이해가 필요한 것이다. 야생동물의 행동양식에 대한 연구는 생래학적으로 비교적 많이 이루어진 편이나 가축화된 동물들에 대하여는 체계적이고 비교학적인 연구가 아직도 부족한 실정이다. 특히 우리 나라에서는 이 분야에 대한 연구는 물론 외국의 연구내용에 대하여도 적극적인 소개가 이루어지지 못하였고 아울러 여러 분야에 실제 적용은 더욱 어려웠다. 동물의 건강을 책임지고 있는 우리 수의 분야는 물론, 가축을 사양하는 축산학 분야 및 모든 동물관련 분야에서 효율적이고 바람직한 동물과 인간의 관계를 구축하기 위하여는 무엇보다도 동물의 행동을 인간의 언어사용 측면에서 이해하려는 노력이 필요하다 하겠다. 이러한 일차적인 필요성에 조금이나마 도움이 되고자 하는 바람으로 외국문헌을 중심으로 인간의 생활과 밀접한 관계를 지닌 여러 동물들의 행동과 그 의미를 소개하고자 한다. 아울러, 소개되는 내용은 Domestic Animal Behavior for Veterinarians and Animal Scientists (제3판, Katherine A. Houpt 지음), Animal Behavior (Tim Halliday 지음), Canine and Feline Behavior Problems(Stefanie Schwartz 지음), Journal of Conpendium on Continuing Education for the Practicing Veterinarian,그리고The Merck Veterinary Manual의 Behavior와 같은 참고문헌에 크게 의존하여 기술된 것임을 밝힌다.

• PNF and Movement
• /
• v.10 no.1
• /
• pp.1-7
• /
• 2012

Purpose : To verify the interrater reliability of upper extremity function assessment among three tools(Wolf motor function test, Motor assessment scale, Fugl-meyer assessment scale). Methods : The subjects of this study 40 (20 was physical therapists and 20 was physical therapy students). For the test one patients with chronic hemiparesis after stroke participated in the study. The Wolf Motor Function Test consists of 16 functional tasks. The motor assessment scale consists of 3 functional tasks. The fugl-meyer assessment scale consists of 8 functional tasks. All test sessions were videotaped and scored by 40 subjects. Analysis : The data was analysis by SPSS PC 14.0 with Cronbach alpha Coefficients, intraclass Correlation Coefficients Kendall tau-b value. Results : WMFT was highly scored in Cronbach's value, Cronbach's ${\alpha}=0.819$ that means high interrater reliability among assessment. WMFT was highly scored all items in p-value except one item, that means high p-value between therapists and students. WMFT was highly scored in Intrarater correlation coefficient (ICC) = 0.79, that means high interrater reliability of each examination item. WMFT was low index of coincidence from all items, MAS was low index of coincidence from a tim and FMA was low index of coincidence from 4 items. Conclusion : The interrater reliability of WMFT were compared with MAS, FMA and highly verified. WMFT can be more useful tool among upper extremity function assessment.

• Journal of radiological science and technology
• /
• v.44 no.6
• /
• pp.635-643
• /
• 2021

The results of empirical researches on the diagnosis of lung cancer are insufficient, so it is limited to objectively judge the clinical possibility and utilization according to the accuracy of diagnosis. Thus, this study retrospectively analyzed the lung cancer diagnostic performance of PET-MRI (Positron Emission Tomography-Magnetic Resonance Imaging) by using the decision matrix. This study selected and experimented total 165 patients who received both hematological CEA (Carcinoembryonic Antigen) test and hybrid PET-MRI (¹⁸F-FDG, 5.18 MBq/kg / Body TIM coil. VIVE-Dixon). After setting up the result of CEA (positive:>4 ㎍/ℓ. negative:<2.5㎍/ℓ) as golden data, the lung cancer was found in the image of PET-MRI, and then the SUV_max (positive:>4, negative:<1.5) was measured, and then evaluated the correlation and significance of results of relative diagnostic performance of PET-MRI compared to CEA through the statistical verification (t-test, P>0.05). Through this, the PET-MRI was analyzed as 96.29% of sensitivity, 95.23% of specificity, 3.70% of false negative rate, 4.76% of false positive rate, and 95.75% of accuracy. The false negative rate was 1.06% lower than the false positive rate. The PET-MRI that significant accuracy of diagnosis through high sensitivity and specificity, and low false negative rate and false positive rate of lung cancer, could acquire the fusion image of specialized soft tissue by combining the radio-pharmaceuticals with various sequences, so its clinical value and usefulness are regarded as latently sufficient.

• Parasites, Hosts and Diseases
• /
• v.60 no.5
• /
• pp.345-352
• /
• 2022

Chitinase AO-801 is a hydrolase secreted by Arthrobotrys oligospora during nematode feeding, while its role remained elusive. This study analyzed the molecular characteristics of recombinant chitinase of Arthrobotrys oligospora (reAO-801). AO-801 belongs to the typical glycoside hydrolase 18 family with conserved chitinase sequence and tertiary structure of (α/β)₈ triose-phosphate isomerase (TIM) barrel. The molecular weight of reAO-801 was 42 kDa. reAO-801 effectively degraded colloidal and powdered chitin, egg lysate, and stage I larval lysate of Caenorhabditis elegans. The activity of reAO-801 reached its peak at 40℃ and pH values between 4-7. Enzyme activity was inhibited by Zn2⁺, Ca2⁺, and Fe3⁺, whereas Mg2⁺ and K⁺ potentiated its activity. In addition, urea, sodium dodecyl sulfate, and 2-mercaptoethanol significantly inhibited enzyme activity. reAO-801 showed complete nematicidal activity against C. elegans stage I larvae. reAO-801 broke down the C. elegans egg shells, causing them to die or die prematurely by hatching the eggs. It also invoked degradation of Haemonchus contortus eggs, resulting in apparent changes in the morphological structure. This study demonstrated the cytotoxic effect of reAO-801, which laid the foundation for further dissecting the mechanism of nematode infestation by A. oligospora.

• Journal of Aquaculture
• /
• v.10 no.3
• /
• pp.335-346
• /
• 1997

Denitrification is one of the important processes of removing nitrate from in recirculating aquaculture systems. And this process is affected by many factors such as external organic carbon sources, hydraulic retention time (HRT), COD/NO3--N (C:N) ratio, etc. However, not many studies were done for the optimum conditions of denitrification in the recirculation system for aquaculture. Therefore, this study was conducted to find out the optimum removal condition of NO3--N using submerged denitrification biofilter. The combinations of two external organic carbon sources (glucose and methanol), two HRT (4 and 8-hour) and four differnent C : N ratios (3, 4, 5, 6) were tested. The removal efficiencies of NO3--N and total inorganic nitrogen (TIM) at 8-hour HRT were better than those at 4-hour's (P<0.05). The maximum removal efficiency of NO3--N by methanol (97.8%) was achieved at HRT and C : N ratio were 8-hour and 4.0 respectively. The efficiencies of methanol for the removal of NO3--N and TIN were always better than those of glucose (P<0.05). The maximum removal efficiencies of total inorgainc nitrogen (TIN) were gained at C : N ration of 5.0. The maximum removel efficiencies of TIN using methanol and glucose were 96.9% and 71.5% respectively. Anaerobic condition which is necessary for denitrification process was not made until the 8-hour HRT and higher C : N ratio (5.0). Removal of NO3--N at 4-hour HRT and C : N ration lower than 5.0 were inhibited by oxygen and/or low quantity of external organic carbon. Removal efficiencies of NO3--N were also inhibited by high C : N (6.0) ratio when HRT was 8-hour.

• Journal of Life Science
• /
• v.17 no.1 s.81
• /
• pp.120-124
• /
• 2007

Fusarium proliferatum KGL0401 was previously isolated from Physalis alkekengi var. francheti plant roots and exhibited higher GA productivity than wild type Gibberella fujikuroi. The :tim of this work was to find out an optimal culture condition for GA production. Various carbon(fructose, glucose, lactose, maltose, sucrose) and nitrogen($KNO_3$, urea, glycine, $NaNO_3,\;NH_4Cl$) sources were used for this study. GAs activities were analysed by gas chromatography and mass spectrometry(GC-MS). The highest yield of $GA_3$ was found in the growth medium supplemented with sucrose as carbon source and $NH_4Cl$ as nitrogen source. The optimum carbon-nitrogen concentration for $GA_3$ production was found to be 0.5 M:0.17 M. Supernatant was prepared from the culture fluid of F. proliferatum KGL0401 cultured for 7 days at 3 0'E and the 10 ul supernatant was treated with 2 leaf-rice seedling.