• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2059-2060
• /
• 2006

본 논문에서는 PVA 모드의 측면 시인성이 왜곡되는 현상을 설명하고, 그 대안으로 나온 S-PVA 모드에서의 측면 시인성 왜곡 현상을 연구하였다. 현재 많이 쓰이는 측면 시인성 왜곡 현상의 정량화에 대한 이론과 S-PVA 모드에 관한 이론을 설명하였다. 제시된 이론에 근거를 두고 2개의 부전극을 가진 픽셀구조에서 전극의 면적비를 다르게 설계하여 시뮬레이션을 하였고, 실제로 제품을 제작해서 시뮬레이션 결과와 부합됨을 확인하였다.

• Journal of Digital Contents Society
• /
• v.5 no.1
• /
• pp.79-86
• /
• 2004

In this paper we implemented the Real Time Contrast Enhancer for image quality enhancement of moving picture. Also we proposed adaptive contrast method that use mean and variance of input video signal. The Designed the contrast Enhancer is measured in comparison with conventional picture and interfaced to 30inch TFT LCD TV of the LG Electronics.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.276-279
• /
• 2005

The proposed Novel OverDriving Technology with Optimum Look-up-Table（LUT）is suggested to be a better solution to reducing the occurrence of overshooting caused by the traditional overdriving method implemented to normally liquid crystal (VA mode). Chunghwa Picture Tubes, LTD. (CPT) has successfully implement this tech into 20 inch TFTLCD TV module at the present day. The proposed technology can speed up gray-to-gray response time of LCD less than one half of frame time. On the side, Optimum LUT construction apply the compression scheme to record total actual grayscale transfer characteristics instead of applying the normal spread method such as linear / non-linear interpolation. The memory space is been reduced and the distortion of the image quality is lesser.

• 전자공학회논문지 IE
• /
• v.46 no.4
• /
• pp.57-65
• /
• 2009

This paper presents the image contrast enhancement technique suitable for local dimming backlight of small-sized mobile display while achieving the reduction of the power consumption. In addition to the large-sized TFT-LCD, small-sized one has adopted LED for backlight. Since, conventionally, LED was mounted on the side edge of a display panel, global dimming method has been widely used. However, recently, new advanced method of local dimming by placing the LED to the backside of the display panel and it raised the necessity of sub-blocked processing after partitioning the target image. When the sub-blocked image has low brightness, the supply current of a backlight LED is reduced, which gives both enhancement of contrast ratio and power consumption reduction. In this paper, we propose simple and improved image enhancement algorithm suitable for the small-sized mobile display. After partitioning the input image by equal sized blocks and analyzing the pixel information in each block, we realize the primary contrast enhancement by independently processing the sub-blocks using the information such as histogram, mean, and standard deviation values of luminance(Y) component. And then resulting information is transferred to each backlight control unit for local dimming to realize the secondary contrast enhancement as well as reduction of power consumption.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04b
• /
• pp.121-123
• /
• 2002

Fast response characteristics of twisted nematic liquid crystal display (TN-LCD) cell with different nematic liquid crystals (NLCs) and cell gap on a rubbed polyimide (PI) surface were studied. High transmittance and fast response time of the TN-LCD on the rubbed PI surface were achieved by using high birefringence ($\Delta$ n) and low cell gap. It is considered that the transmittance and response time of the TN-LCD on the rubbed PI surface decreased as $\Delta$ nd decrease.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.403-406
• /
• 2004

This paper describes an IP design and implementation of a complicated hardware to System on a Chip(SoC) to simplify the complicated system. As using SoC, hardware and software can be designed and verified both. This paper describes an image capturing IP and a perpendcular coordinate robot IP that can move on x, y coordinates. 240$\ast$320 TFT-LCD is used to display images.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.71-72
• /
• 2000

The design of large area thin film transistor liquid crystal displays (TFT-LCDs) requires consideration of cross-talks between the data lines and pixel electrodes. These limits are imposed by the mutual coupling capacitances present in a pixel. The mutual coupling capacitance causes a pixel voltage error. In this study, semi-empirical model, which is adopted from VLSI interconnection capacitance calculations, is used to calculate mutual coupling capacitances. With calculated mutual coupling capacitances and arbitrary given image pattern, the root mean square (RMS) voltage of pixel is calculated to see vertical cross-talk from the first to the last column. The information obtained this study can be utilized to design the larger area and finer image quality panel.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.503-506
• /
• 2015

In accordance with IoT(Internet of Things) commercialization, the need to design SoC-based hardware platform with wireless communication is increasing. This paper therefor proposes an SoC platform architecture with Smart Frame System inter-communicating between devices. Wireless communication functions and high-performance real-time image processing hardware structure was applied to existing digital photo frame. We developed a smart phone application to control the smart frame through Bluetooth communication. The SoC platform hardware consists of CIS controller, Memory controller, ISP(Image Signal Processing) module for image scaling, Bluetooth Interface for inter-communicating between devices, VGA/TFT-LCD controller for displaying video. The Smart Frame System to support the IoT services was implemented and verified using HBE-SoC-IPD test board equipped with Virtex4 XC4VLX80 FPGA. The operating frequency is 54MHz.

• Journal of KIISE:Databases
• /
• v.34 no.2
• /
• pp.99-108
• /
• 2007

In this paper, we design and implement the Film Defect Inspection System (FDIS) that detects film defects and determines their types which can be used for producing polarized films of TFT-LCD. The proposed system is designed to detect film defects from polarized film images using image segmentation techniques and to determine defect types through the image analysis of detected defects. To determine defect types, we extract features such as shape and texture of defects, and compare those features with corresponding features of referential images stored in a template database. Experimental results using FDIS show that the proposed system detects all defects of test images effectively (Precision 1.0, Recall 1.0) and efficiently (within 0.64 second in average), and achieves the considerably high correctness in determining defect types (Precision 0.96 and Recall 0.95 in average). In addition, our system shows the high robustness for rotated transformation of images, achieving Precision 0.95 and Recall 0.89 in average.

• Journal of Korea Multimedia Society
• /
• v.2 no.1
• /
• pp.89-98
• /
• 1999

In this paper, we propose the delta-shaped interpolation method for displaying multi-source video signals on a-Si TFT LCD Panel. The proposed method can be implemented by using less circuits than the conventional methods. Thus it can be applied to the FPD(Flat Panel Display) system without any cost increase such as field memory cost. In order to compare the picture quality of the proposed method with that of the conventional methods, the computer simulation has been executed by checking PSNR, which is especially focused on the edge characteristics. The simulation results show that the proposed method is better than others from the point of view on the edge and local characteristics of the image. Finally, the characteristics and trade-off of the proposed method are discussed.