• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.317-323
• /
• 2015

본 연구는 보건사회복지부에서 실시하고 있는 포괄간호서비스 병원 시범사업이 간호사의 간호업무성과, 직무만족 및 고객지향성에 미치는 영향을 조사하기 위해 시도되었다. 대상자는 연구자의 편의추출에 의하여 S시에 소재한 시범사업 병원에 근무하는 간호사를 표적 모집단으로 하였다(실험군 57명, 대조군 55명). 자료는 시범사업 시행 후 1개월과 6개월 시점에 조사하였으며, 수집된 자료는 SPSS win 18.0 프로그램을 이용하여 ${\chi}^2$ test, t-test, Kolmogorov-Smirnov test, 공변량분석으로 검정하였다. 연구결과 실험군이 대조군보다 간호업무성과, 직무만족 및 고객지향성에 있어서 더 높은 것으로 조사되었다. 이는 포괄간호서비스 병원 사업 구축을 위한 기초자료로 이용될 수 있을 것이다.

• 한국항행학회논문지
• /
• 제24권5호
• /
• pp.423-429
• /
• 2020

본 논문에서는 전자기 적합성 (EMC; electromagnetic compatibility)시험 규격에 대해 설명하고, 유도탄 구성품과 유도탄 시스템의 전자기 내성 (EMS; electromagnetic susceptibility)시험에 대한 목적과 시험 구성을 확인하였다. 시험구성과 규격은 미 국방규격인 MIL-STD-461F와 MIL-STD-464C를 기반으로 유도탄 구성품과 유도탄 시스템의 구성을 제시하였고, 유도탄 구성품과 유도탄 시스템의 최종운용 상태인 비접지 상태가 구성되도록 설명하였다. 또한, 내성 시험 중 정상상태 확인 방법과 고려해야할 점에 대하여 소개하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1819-1826
• /
• 2007

This study results of performed field load test in order to estimate the best pile length assessment and allowable bearing capacity of the pile foundation. End of initial driving(EOID) and restrike of pile dynamic loading tests were performed to calculate allowable bearing capacity of the experimental pile side and results were compared with the allowable bearing capacity estimated by theory. The results of allowable bearing capacity by EOID test is $1.08{\sim}1.21$ in the range of compared to the capacity calculated by the Structure Foundation Design Criterion. Allowable bearing Capacity by restrike of pile dynamic loading test is $1.32{\sim}1.48$ in the range of compared to the Structure Foundation Design Criterion. The Foundation Design Criterion underestimated the pile capacity. If the bearing capacity calculated by Structure Foundation Design Criterion is 100, EOID of pile dynamic loading test is 116, restrike of pile dynamic loading test is 138 for 20m pile used in this experimental.

• 대한물리의학회지
• /
• 제7권4호
• /
• pp.443-450
• /
• 2012

PURPOSE: This study was investigated to find the validity of active movement control test for low back pain patients with or without hamstring shortening. METHODS: The subjects of this study were 28 subjects and all of them agreed to participate in the study. All subjects were classified according to 4groups. Group1 was no LBP, no hamstring shortening. Group2 was no LBP, hamstring shortening. Group3 was LBP, no hamstring shortening. Group4 was LBP, hamstring shortening. We measured to see their low back pain and hamstring shortening with VAS, Goniometer for active movement control test. We analyzed the data using Cochran Q test and crosstabulation for agreement index. RESULTS: The results of this study were as follows : 1) Low back pain had effect on active movement control by Group1 and Group2. 2) Hamstring had effect on active movement control by Group1 and Group2 3)Low back pain with or without hamstring shortening had effect on active movement control by Group4 CONCLUSION: According the results of this study, active movement control test were significantly influenced on low back pain and hamstring interaction.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.37-42
• /
• 2000

The boiler tubes and steam Pipes operating both at high temperature and pressure for a long period of time in a power plant are degraded by creep because of internal pressure. So, the remaining life of a component is evaluated by the creep rupture strength. Although the conventional method to evaluate the creep damage is widely used, it has some disadvantages such as requires large size specimen and long employed to evaluate the correlation between fracture toughness and evaluation time. Recently, new method so called "small lunch test' is used to evaluate degradation of creep. In this study, a conventional creep test and a small punch test are conducted using 2.25Cr-1Mo steel which is mainly used for the boiler tubes and steam pipes in power plant. The creep life, approximately 1,500 hrs, is determined by conventional method under a severe condition then specimens for a small Punch test are obtained after certain time intervals such as 1/4, 1/2 and 3/4 of final rupture time, respectively.

• 한국항공우주학회지
• /
• 제35권1호
• /
• pp.73-78
• /
• 2007

국내 개발에 성공한 기본훈련기(KTX-1) 시제기 및 외부연료탱크를 활용하여 유도무기에 적용되는 핵심 부품의 비행환경 성능을 검증할 수 있는 탑재비행시험(Captive Flight Test) 절차 및 결과를 소개한다. 2001년부터 2006년까지 총 150 쏘티 이상의 탑재비행시험을 통하여 국내 개발된 탐색기, 항법장치/기법, 관성센서, 전파고도계 등을 비행환경에서 시험평가하여 유도무기체계 연구개발 단계에서 일정단축 및 비용절감에 기여하였다.

• 대한기계학회논문집B
• /
• 제25권5호
• /
• pp.634-644
• /
• 2001

The test facility of a 1/60-scale model for train-tunnel systems has been recently developed to investigate the effects of tunnel portal shapes, hood shapes and air-shafts for reducing the micro-pressure waves radiating towards the surroundings from the tunnel exit. The present test rig has been advanced from a 1/70-scale facility at NLR in Netherlands. The NLR test rig has the two-wise guidance system that needs two ears attached on the external surface of a model train nose. Therefore, their train models have irregular nose shapes. The main characteristics of the present facility are that the train model is guided by only one wire from the compressed air launcher to the absorber parts of test facility and the wire guidance hole is located at the axial center of a train model. In the present test rig, after a train model is launched, the air jet from the launcher does not enter the tunnel model. Experimental results were compared with numerical predictions to prove the performance of the test facility.

• 한국소음진동공학회논문집
• /
• 제20권4호
• /
• pp.338-347
• /
• 2010

Heunginjimun designated as a Treasure No.1 is a two-story wooden structure with 5 bay and 2 bay in its front and side views, respectively. This paper presents an investigation on vibration characteristics of Heunginjimun through both ambient vibration and impact hammer tests. Ambient vibration test was performed to identify the natural frequency of Heunginjimun from the spectrum analysis of time history. Impact hammer test was undertaken to find the frequency of Heunginjimun which is affected by the surrounding traffics and to verify the reciprocal principle for the wooden structural system. Ambient vibration test results of Heunginjimun showed that the natural frequencies in two principal axes 1.5 Hz and 1.1 Hz, respectively. It was confirmed from impact hammer tests for a ground that the frequency of 4.2 Hz is caused by the traffics surrounding Heunginjimun. It was also observed that from the impact hammer test results between two locations in Heunginjimun that the transfer functions measured from two corresponding locations coincided well with each other. This result shows that the wooden structural system is globally linear, and the reciprocal principle is established.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권6호
• /
• pp.284-292
• /
• 2005

Because all of the short-circuit testing laboratories have the limitation of test facilities, the synthetic making test methods have been used to estimate the short-circuit making performance of the ultra high-voltage circuit breaker as the alternative to direct test methods. So, KERI(Korea Eelctrotechnology Research institute) has completed the construction of the synthetic making test facilities using the low capacity step-up transformer method which fulfill the requirements specified in newly revised IEC 62271-100 Edition 1.1(2003) and have the testing capability up to 550kV, 63kA full-pole circuit breaker. The test facilities using the low capacity step-up transformer method presented in this paper are made up of the unit equipments such as HCS(High-speed Closing Switch), ITMC(Initial Transient Making Current) circuit and UP TR(low capacity step-up transformer) and have the operating range of 17.6$^{\circ}$ $\~$ 145.1$^{\circ}$ for testing the circuit breaker rated on up to 50kA and 43.1$^{\circ}$ $\~$ 119.6$^{\circ}$ for more than 50kA.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 추계학술대회 논문집
• /
• pp.190-191
• /
• 2016

국제 핵융합실험로인 ITER 장치의 초전도자석 전원장치용 CCU/L(Correction Coil Upper/Lower), CCS(Correction Coil Side) 그리고 VS1($1^{st}$ Vertical Stabilization) 형식 등 각 변압기 초도품의 제작을 완료하고 공장시험(FAT, Factory Acceptance Test)을 실시하였다. 이 변압기들은 각 형식별로 2대에서 6대를 제작하지만 각 형식별 초도품 1대에 대해서는 Type Test를 실시하고 나머지 후속물량에 대해서는 Routine Test로 공장시험을 실시하도록 계획되어 있다. 따라서 이 초도품 변압기들에 대해서는 Type Test로 공장시험으로 실시하였고, 그 대표적인 시험항목으로는 단락시험, %임피던스 시험, 뇌임펄스 시험, 정격전류 온도상승시험, 상용주파수 내전압시험 등이 있다. 이들 중 CCU/L, CCS 각 형식의 초도품에 대해서는 2015년도 공장시험을 실시하여 요건에 부합됨을 확인하였고, 본 논문에서는 VS1 컨버터 변압기 초도품에 대하여 Type Test로 실시한 공장시험 내용과 그 결과를 보여준다.